- Reduced price
- New

Xmotorstore Payments
Polini muffler for Ape 50 cc. Polini code: 200.2031.
Polini presents the Original Exhaust for the legendary Piaggio APE 50.
Born with the aim of improving performance and at the same time reducing noise, the Polini Original muffler for Ape 50 is suitable both for use with original engines and with the basic kit.
Studied and designed to integrate perfectly with the APE frame.
The design of the curve and of the interiors guarantees high performance with a low but always pleasant noise level.
The muffler is perfectly interchangeable with the original.
Compatible with: APE 50 – FL – FL2 – FL3 – RST MIX (6 springs).
Polini muffler for Ape 50 cc. Polini code: 200.2031.
Polini presents the Original Exhaust for the legendary Piaggio APE 50.
Born with the aim of improving performance and at the same time reducing noise, the Polini Original muffler for Ape 50 is suitable both for use with original engines and with the basic kit.
Studied and designed to integrate perfectly with the APE frame.
The design of the curve and of the interiors guarantees high performance with a low but always pleasant noise level.
The muffler is perfectly interchangeable with the original.
Compatible with: APE 50 – FL – FL2 – FL3 – RST MIX (6 springs).
Reference: 201.1906
Brand: POLINI
Polini carburetor for Ape 50 diameter 19 mm. Polini Code: 201.1906. Polini Cp carburetor for: Piaggio, Piaggio Ape 50, Piaggio Ape 50 FL, Polini. It is mounted on the original Piaggio manifold. Polini carburetor calibration for Ape: Maximum jet 86 Minimum Jet 32 Needle 14/22 24x30 valve Pulverizer bush diameter 2.6 mm Mixer connection: YES.
Reference: 200.0127
Brand: POLINI
Exhaust Polini for Piaggio Ape 50, 200.0127 Code Exhaust Polini for Piaggio, Piaggio Ape 50
Reference: 140.0054
Brand: POLINI
Piaggio Ape 50 cylinder kit 47 mm diameter. Polini code: 140.0054 Piaggio thermal group kit for: Paggio, Piaggio Ape 50, Piaggio Ape 50 FL, Piaggio Ape 50 FL2, Piaggio Ape 50 FL3, Piaggio Ape 50 Rst mix Warning: use long-pitch candle. Cast iron cylinder
Reference: 140.0092
Brand: POLINI
Polini cylinder kit for Piaggio Ape diameter 69 mm, pin diameter 18 mm. Polini Code: 140.0092 Piaggio cylinder kit for: Piaggio, Piaggio Ape Tm 703, Piaggio Ape Tm P602 Cast iron cylinder
Reference: 215.0270
Brand: POLINI
Single-reed intake manifold diameter 18-16 / 19 mm for Ape 50, code 215.0270 Intake manifold for: Piaggio, Piaggio Ape 50, Piaggio Ape 50 FL It is mounted on the crankcase with 3-hole attachment. Carburetor connection diameter 23 mm Intake manifold for: Piaggio, Piaggio Ape 50, Piaggio Ape 50 FL
Reference: 215.0271
Brand: POLINI
Single reed intake manifold diameter 19 mm Shbc for Ape 50, code 215.0271 Intake manifold for: Piaggio, Piaggio Ape 50, Piaggio Ape 50 FL For SHBC 19.19 Ape carburetor Carburetor connection diameter 23 mm
Reference: 215.0272
Brand: POLINI
Polini single-reed intake manifold for Ape 50cc. Polini code: 215.0272 PIAGGIO: APE 50 - APE 50 FL, FL2, FL3, RST MIX (6 Springs) Rubber sleeve diameter 36m length 31mm
Reference: 171.0551
Brand: POLINI
Polini ignition for Piaggio Ape 50 cc. Polini code: 171.0551. Piaggio Ape 50 ignition, 5-wire electric start. Compatible for: Piaggio APE 50 - APE 50 FL, FL2, FL3, RST MIX (6 springs). Flywheel Kg 1.4
Reference: 176.0151/R
Brand: POLINI
Original Racing Polini Brake Shoes (with springs) d.90X18 mm Code: 176.0151/R Application: Original Polini racing brake shoes (with springs) Benelli Motorella 50, Original Polini racing brake shoes (with springs) Benelli G2, Original Polini racing brake shoes (with springs) Benelli G2L, Original Polini racing brake shoes (with springs) Fnatic Motor Issimo...
Reference: 01.SZ.0213.L
Brand: Ohvale
Ohvale Timing driven sprocket Code: 01.SZ.0213.L
Reference: 3218341
Brand: Malossi
Malossi Maxi wild lion 3218341 exhaust for Kymco Code: 3218341 Thanks to the strengthening of Malossi's technical staff (equipped with very modern laboratories) and to the many years of experience in the world of competitions, Malossi wanted to make the difference, giving as an imperative for the design of the new MAXI WILD LION mufflers: innovative...
Reference: 060039
Brand: T4TUNE
Approved moto indicators MISSILE CARBON with leds
Reference: 251.0033
Brand: POLINI
Or series dome cylinder head Polini Big evo 52 mm. Polini Code: 251.0033
Reference: 61 9733
Brand: Malossi
Malossi rear pulley assembly d.128 Malossi code: 61 9733 Malossi rear pulley assembly for APRILIA AMICO 50 2T only for OVER RANGE. Malossi rear pulley assembly for APRILIA AREA 51 50 2T LC only for OVER RANGE. Malossi rear pulley assembly for APRILIA GULLIVER 50 2T LC only for OVER RANGE. Malossi rear pulley assembly for APRILIA RALLY 50 2T MINARELLI only...
Reference: 3069.04
Brand: Domino
Handle control with aluminum clutch lever, choke lever, M10 mirror holder connection pitch 1.25 and detachable bracelet. Domino code: 3069.04 this throttle control is compatible for: Beta RR 50 clutch lever. Clutch lever Husqvarna TE-E 410 (00). Clutch lever Husqvarna TE-E 610 (00). Clutch lever Husqvarna TE E-LT 610 (00). Clutch lever Husqvarna TE E DUAL...
Reference: 02 5035B
Brand: Malossi
Malossi inclined 15x19 mm intake manifold 02 5035B Code: 02 5035B Malossi inclined intake manifold
Reference: 0829400 64
Brand: DELLORTO
Manual air starter Dellorto PHBE PHBH PHBL VHSA VHSB VHSH. Dellorto 0829400 64 Manual air starter Dellorto PHBE. Manual air starter Dellorto PHBH. Manual air starter Dellorto PHBL. Manual air starter Dellorto VHSA. Manual air starter Dellorto VHSB. Manual air starter Dellorto VHSH.
Reference: 171.0015
Brand: POLINI
Polini ECU for Vespa Gt3 300 euro 3/4. Polini Code: 171.0015. The Polini programmable control unit is compatible with 300 cc 4-stroke injection engines.
Reference: MC1
Brand: HJC
Hjc Rpha 71 Carbon Hamil helmet Premium Integrated Matrix / P.I.M. EVO CARBON. Carbon Fiber outer shell offers a lighter and more comfortable shell with better impact resistance performance. The aerodynamic shell design reduces air resistance and ensures stability at high speed. Full front-to-back airflow: 2 vents and 2 exhausts. HJ-40 Pinlock Ready...
Reference: 6217603
Brand: Malossi
Malossi brake shoe Malossi code: 6217603 Malossi brake shoe for Piaggio Ape 50 2T front. Malossi brake shoe for Piaggio Ape FL 50 2T front. Malossi brake shoe for Piaggio Ape FL2 50 2T front. Malossi brake shoe for Piaggio Ape FL3 50 2T front. Malossi brake shoe for Vespa ET3 Primavera 125 2T front. Malossi brake shoe for Vespa PK XL 50 2T front. Malossi...
Reference: Forma-Phantom
Brand: Forma Boots
Top-tier racing boots developed with professional riders. Maximum protection, comfort, and style for track and road use.
Reference: 204.0961/D
Brand: POLINI
Polini piston diameter 50 mm, selection D (49.915 mm) Polini piston for: Piaggio, Piaggio Zip 50 Polini Piaggio 100 cc engine piston
Reference: MC5
Brand: HJC
Hjc rpha 12 Carbon helmet. New 2024 hjc collection, Hjc full-face helmet in carbon. Premium Integrated Matrix / P.I.M. EVO CARBON. Carbon Fiber outer shell offers a lighter and more comfortable shell with better impact resistance performance. Pinlock Ready HJ-42 VISOR: Offers 99% UV protection, anti-scratch coating; The two-way pin ratchet ensures smooth...
Reference: 209.0322
Brand: POLINI
Polini gasket set for Rotax 123 engine 209.0322 Code: 209.0322 Polini gaskets set for: Aprilia, Aprilia Sport 125, Aprilia AF1 125, Aprilia Europa 125, Aprilia Pegaso 125, Aprilia Red rose 125, Aprilia RS 125, Aprilia RX 125 R, Aprilia Tuareg Rally 125, Aprilia Tuareg wind 125, Aprilia SX 125 , Polini, Rotax, Rotax 122, Rotax 123, Hm, Hm Derapage 125, Hm...
Polini muffler for Ape 50 cc. Polini code: 200.2031.
Polini presents the Original Exhaust for the legendary Piaggio APE 50.
Born with the aim of improving performance and at the same time reducing noise, the Polini Original muffler for Ape 50 is suitable both for use with original engines and with the basic kit.
Studied and designed to integrate perfectly with the APE frame.
The design of the curve and of the interiors guarantees high performance with a low but always pleasant noise level.
The muffler is perfectly interchangeable with the original.
Compatible with: APE 50 – FL – FL2 – FL3 – RST MIX (6 springs).