- Reduced price
- New

Xmotorstore Payments
Malossi Vespower ignition with 20 mm diameter cone
Malossi Code: 5516953
Malossi Vespower ignition with 20 mm diameter cone and 1.2 kg flywheel
Complete ignition line for the entire vintage Vespa range with gears.
To allow a perfect and easy installation, a specific version has been studied for each model.
The ignition is distinguished by:
- Lightened flywheel (weight 1.2 kg) with moment of inertia as per table, obtained from a forged with external preparation of additional masses (not supplied in the kit).
- 4-pole 12 V (90 Watt) stator with battery charging output.
- Red plastic fan with advanced cooling booster secondary fins (optimized fan profile, absorption distribution).
- Wiring dedicated to each specific application.
-Integrated coil / control unit.
-Voltage regulator.
Malossi ignition compatible with:
5516953 VESPOWER IGNITION WITH Ø 20 CONE AND 1.2 KG FLYWHEEL X VESPA PX 125 2T euro 3
5516953 IGNITION VESPOWER MALOSSI CONE 20 VESPA PX E 200 2T FLYWHEEL 1,2KG
5516953 IGNITION VESPOWER MALOSSI CONE 20 VESPA PX 125 2T EURO 2 (VLX2M) FLYWHEEL 1,2KG
5516953 IGNITION VESPOWER MALOSSI CONE 20 VESPA PX 125 2T EURO 3 FLYWHEEL 1,2KG
5516953 IGNITION VESPOWER MALOSSI CONE 20 VESPA PX 150 2T EURO 2 (VLX2M) FLYWHEEL 1,2KG
5516953 IGNITION VESPOWER MALOSSI CONE 20 VESPA PX 150 2T EURO 3 FLYWHEEL 1,2KG
5516953 IGNITION VESPOWER MALOSSI CONE 20 VESPA PX 125 2T EURO 0-1 FLYWHEEL 1,2KG
5516953 IGNITION VESPOWER MALOSSI CONE 20 VESPA PX 150 2T EURO 0-1 FLYWHEEL 1,2KG
5516953 IGNITION VESPOWER MALOSSI CONE 20 VESPA COSA 200 2T FLYWHEEL 1,2KG
5516953 IGNITION VESPOWER MALOSSI CONE 20 VESPA COSA 125 2T FLYWHEEL 1,2KG
5516953 IGNITION VESPOWER MALOSSI CONE 20 VESPA COSA 150 2T FLYWHEEL 1,2KG
Reference: 5517509
Brand: Malossi
Malossi flywheel and stator assembly 5517509 Code: 5517509 Malossi flywheel and stator assembly for Vespower ignition. Flywheel dimensions diameter 125X42 mm
Reference: 5517516
Brand: Malossi
Malossi 5517516 flywheel and fan assembly Code: 5517516 Malossi flywheel and fan assembly for Vespower ignition. Flywheel dimensions diameter 125X42 mm
Reference: 5515476B
Brand: Malossi
Stator for ignition Vespower Malossi 5515476B Code: 5515476B
Reference: 5515479B
Brand: Malossi
Malossi Transducer for Power and Vespower Ignitions 5515479B Code: 5515479B
Reference: 5517155B
Brand: Malossi
Malossi flywheel diameter 125x42 mm 5517155B Code: 5517155B Malossi flywheel for Vepower ignition
Reference: 5519119B
Brand: Malossi
Shielded Malossi spark plug cap 5519119B Malossi code: 5519119B
Reference: 7419899
Brand: Malossi
Malossi Mhr cooling fan diameter 167 mm 7419899 for Vespower ignition Malossi code: 7419899 Mhr cooling fan for Vespower ignition MAIN FEATURES -Diameter: Ø 167 mm. -Material: solid aluminium, anodized in red. -Finish: diamond-cut in the fixing area. -Compatibility: all Vespower ignitions. -Number of blades: 12 main + 12 auxiliary. -Design: Optimized...
Reference: 7416936B
Brand: Malossi
Malossi cooling fan diameter 167 mm for Vespower ignition 7416936B Malossi code: 7416936B
Reference: 1715715
Brand: Malossi
Flywheel mass Malossi diameter 144 for VESPower - flywheel Kg. 1.2 Malossi code: 1715715 Flywheel mass Malossi for VESPA COSA 125 2T not to be used on vehicles with VESPower art. 5515702 5516956. Flywheel mass Malossi for VESPA COSA 150 2T not to be used on vehicles with VESPower art. 5515702 5516956. Flywheel mass Malossi for VESPA COSA 200 2T not to be...
Reference: 1715716
Brand: Malossi
Flywheel mass diameter 134 for VESPower - flywheel Kg. 1.2 Malossi code: 1715716 Mass for Malossi flywheel for VESPA COSA 125 2T not to be used on vehicles with VESPower art. 5515702 5516956. Mass for Malossi flywheel for VESPA COSA 150 2T not to be used on vehicles with VESPower art. 5515702 5516956. Mass for Malossi flywheel for VESPA COSA 200 2T not to...
Reference: 282.0003
Brand: POLINI
APRILIA: AF1 50 MINARELLI AM6 - MX 50 Minarelli AM6 - RS 50 MINARELLI AM6 - RX 50 MINARELLI AM6 - TUONO 50 Minarelli AM6BETA: RR 50 AM6 (1999-2002) - RR 50 SM AM6 (2002-2004) - RR 50 ENDURO, MOTARD 50 ALU AM6 2003FANTIC MOTOR: CABALLERO 05 Minarelli AM6HM - VENT: CRE 50 Minarelli AM6 - CRE 50 SIX 2003/2005 Minarelli AM6 - DERAPAGE 50 2001/02 Minarelli AM6...
Reference: 03.ST.0015.L
Brand: Ohvale
Ohvale Gp-2 and Gp-0 Evo steering limit switch. Steering stops for Ohvale gp0 and gp2. Ohvale Code: 03.ST.0015.L Attention: 1 piece pack.
Reference: 5518206B
Brand: Malossi
Malossi Digitronic code 5518206B digital electronic control unit Malossi Digitronic digital electronic control unit for 2T 50 CC euro 4 vehicles with variable advance.
Reference: 01.SZ.0325.L
Brand: Ohvale
PIN 8×12×6.3 Ohvale 110 4S Code: 01.SZ.0325.L
Reference: A2103
Brand: Alfano
45 cm M5 water temperature sensor A2103. This NTC technology sensor with a 5mm metric thread can be connected to the motor head if the motor has a hole designed to install this sensor. Note: This sensor must be used with an A3301 extension cable or A2190 hub.
Reference: 060008
Brand: T4TUNE
Pair of DIAMANT CARBON indicators Code: 060008 Ean: 9900000000844
Reference: 01.AS.0319.L
Brand: Ohvale
Ohvale Top Plate PHBH28 Code: 01.AS.0319.L
Reference: 1610997
Brand: Malossi
Malossi phbg 21 bd 1610997 fuel system Malossi code 1610997 Application: Malossi fuel system for Aprilia Mojito Custom 50 2T Malossi fuel system for Aprilia SR (carb.) 50 2T LC 2004-> (Piaggio) Malossi fuel system for Aprilia SR R 50 2T LC Euro 4 2018-> (Piaggio CA81M) Malossi fuel system for Aprilia SR Motard 50 2T Euro 2 Malossi fuel system for...
Reference: 215.0330
Brand: POLINI
15mm Peugeot 103 intake manifold. Polini Code: 215.0330 Compatible with Peugeot: 103 - 104 - 105 - GL 10
Reference: 143.735.003
Brand: POLINI
Polini 910 minibike steering head with bearings. Polini Code: 143.735.003
Reference: Hjc F100 Carbon
Brand: HJC
Hjc F100 Carbon helmet. "AFC" Advanced Fiberglass Composite Shell: Utilizing HJC's proprietary technology to laminate various specialty materials with rigid fiberglass, the advanced fiberglass composite shell is lightweight yet highly impact resistant. "ACS" Advanced Channeling Ventilation System: Full front-to-back airflow expels heat and moisture from...
Reference: 6719289
Brand: Malossi
Malossi HTQ secondary gears z 10 / 47 for Piaggio 6719289 Malossi code: 6719289. To transform the gears from long ratio to short.
Reference: 209.0312
Brand: POLINI
Gasket set for Motobecane h2o diameter 39 mm 209.0312 Polini gasket set for: Motobecane, Motobecane 51, Motobecane 92GT, Motobecane M16, Polini Code:209.0312
Reference: 46 8308
Brand: Malossi
Malossi Rs24 46 8308 rear shock absorber Malossi code: 46 8308 Malossi rear Rs24 shock absorber, wheelbase 294 mm. Regenerable oil-pneumatic shock absorber with bilamellar piston and diaphragm compensation. -Piston Ø 36 mm with two independent disc packs: one in extension and one in compression; harmonic steel lamellar system with leaf spring...
Reference: 171.0686
Brand: POLINI
Coil kit with CDI control unit and Polini programmer Polini presents the coil with integrated CDI control unit combined with the PVL stator programmer, offering optimal control over the advance curve for personalized engine performance. Main features: - Coil with integrated CDI control unit (171.0685): Guarantees greater efficiency in spark delivery and...
Reference: 32 5225b
Brand: Malossi
Malossi exhaust pipe for Hercules Prima Malossi code: 32 5225b Malossi exhaust pipe for HERCULES PRIMA 5 50 ie.
Malossi Vespower ignition with 20 mm diameter cone
Malossi Code: 5516953
Malossi Vespower ignition with 20 mm diameter cone and 1.2 kg flywheel
Complete ignition line for the entire vintage Vespa range with gears.
To allow a perfect and easy installation, a specific version has been studied for each model.
The ignition is distinguished by:
- Lightened flywheel (weight 1.2 kg) with moment of inertia as per table, obtained from a forged with external preparation of additional masses (not supplied in the kit).
- 4-pole 12 V (90 Watt) stator with battery charging output.
- Red plastic fan with advanced cooling booster secondary fins (optimized fan profile, absorption distribution).
- Wiring dedicated to each specific application.
-Integrated coil / control unit.
-Voltage regulator.