Xmotorstore Payments
Minimoto work stand. Workshop stand for minimoto, professional work tool in powder-coated metal. 3 height adjustments of the workbench, adjustable motorcycle position, the "fork" motorcycle support is adjustable in width, allows you to work on all the mini bikes on the market, such as: Polini, Dm, Blata, Grc, Stamas, Grc and others. Worktop: 95x45 cm.
The work stand for minimoto is foldable and easily transportable thanks to its retractable closure and the wheels at the base, also equipped with wheel locks to stabilize the stand.
Closed stand size: 95x45x15 cm
Minimoto work stand. Workshop stand for minimoto, professional work tool in powder-coated metal. 3 height adjustments of the workbench, adjustable motorcycle position, the "fork" motorcycle support is adjustable in width, allows you to work on all the mini bikes on the market, such as: Polini, Dm, Blata, Grc, Stamas, Grc and others. Worktop: 95x45 cm.
The work stand for minimoto is foldable and easily transportable thanks to its retractable closure and the wheels at the base, also equipped with wheel locks to stabilize the stand.
Closed stand size: 95x45x15 cm
Reference: 206.0200
Brand: POLINI
Polini segment diameter 47x1.2 mm 206.0200 Segment 47x1.2 mm compatible with all types of motorcycles
Reference: 204.0900/D
Brand: POLINI
Polini piston diameter 50 mm, selection D (49.975 mm) for Minarelli AM6 engine 204.0900/D Polini piston for: Aprilia, Aprilia AF1 50, Aprilia MX 50, Aprilia RS 50, Aprilia RX 50, Aprilia Tuono 50, Beta, Beta RR 50, Fantic Motor Caballero 05, Fantic Motor Enduro competition 50, Fantic Motor Enduro performance 50, Fantic Motor Motard ompetition 50, Fantic...
Reference: 2311.03-02
Brand: Domino
Domino HR cross throttle with gas cover, ball bearing and closed black 1150 model grips. Domino Code: 2311.03-02 Support material: Aluminum Support finish: Painted Black colour Max stroke: 50 mm Rapidity: 1.9 ° / mm Cable Type: Mono Cable
Reference: 2021/28
Brand: STAMAS
Decomposable cnc collar 28 mm diameter Stamas
Reference: GHR 010.001
Brand: GHR
Complete 50cc engine Ghr gasket kit. The kit includes: - Cylinder base gaskets Ghr: 0.05 - 0.10 - 0.20 - 0.50 - Oring studs 5 pcs - Upper and lower dome oring (viton) 1 pc each - Oring head collision 1 pc - Oring viton exhaust 1 pc - Manifold and reed valve gaskets 1 pc each
Reference: A3406
Brand: Alfano
Special cable 200 cm for 0-5V sensor connections, must be connected to the Lambda input of Box12 A1160. Yellow wire = Ground (GND) Red wire = + 5V Green wire = Sensor signal from 0 to + 5V
Reference: 215.0441
Brand: POLINI
Polini 360 degree intake manifold diameter from 19 to 24. Polini code: 215.0441
Reference: 017010
Brand: BZM
Bzm minimoto piston for 50cc 2t. Original Bzm piston diameter 40mm with flat head for 50cc 2t engines. Available in sizes: Piston bzm selection 0. Piston bzm selection A. Bzm piston AA selection. Piston bzm selection B. Attention: The clearance between piston and cylinder must be approximately 0.040 (four hundredths).
Reference: 241.737 (aggiornato)
Brand: POLINI
Polini Variator for Vespa 50cc 4t euro 5. Polini code: 241.765
Reference: 1103.82.40.04
Brand: Domino
Domino sponge knobs black 132 mm open 1103.82.40.04 Material: Open cell foam rubber Black colour Length: 132 mm End: Open Handlebar / Gas tube diameter: 22/26 mm Flange diameter: 52 mm Handle diameter Knob mounted: 30-34 mm
Reference: 271.0110
Brand: POLINI
Polini K2D pin diameter 16x50 mm. Polini Code: 271.0110
Reference: 211.0013
Brand: POLINI
Polini cylinder head diameter 55 mm. Polini code: 211.0013 Polini cylinder head for: Piaggio, Piaggio Ape 50, Vespa, Vespa 50 Attention: use long-pitch spark plug.
Reference: 244.114
Brand: POLINI
Fixed half-pulley Yamaha Majesty 125 cc 4t. Polini Code: 244.114
Reference: 204.0754
Brand: POLINI
Honda piston diameter 39.4 mm Honda piston for: Honda, Honda Bali 50, Honda Sfx 50, Honda Sgx 50 Sky, Honda SH 50 New, Honda Sport 50 Sfx, Honda Sxr 50, Honda X8R 50, Polini
Reference: 243.076
Brand: POLINI
Honda Sh 125/150 contrast spring Code 243.076 Polini contrast spring for scooters.
Minimoto work stand. Workshop stand for minimoto, professional work tool in powder-coated metal. 3 height adjustments of the workbench, adjustable motorcycle position, the "fork" motorcycle support is adjustable in width, allows you to work on all the mini bikes on the market, such as: Polini, Dm, Blata, Grc, Stamas, Grc and others. Worktop: 95x45 cm.
The work stand for minimoto is foldable and easily transportable thanks to its retractable closure and the wheels at the base, also equipped with wheel locks to stabilize the stand.
Closed stand size: 95x45x15 cm
