Xmotorstore Payments
Domino cross grips 6131
Pair of Off-road grips.
Special ultra soft rubber finish for an excellent grip.
Without raised area in the back.
Material: Thermoplastic rubber
Length: right 120 mm / left 123 mm
End: Closed
Handlebar / Gas tube diameter: 22/26 mm
Grooves for iron wire: 2-3 slots
Flange diameter: 60 mm
Handle diameter Knob mounted: 30 mm
Domino cross grips 6131
Pair of Off-road grips.
Special ultra soft rubber finish for an excellent grip.
Without raised area in the back.
Material: Thermoplastic rubber
Length: right 120 mm / left 123 mm
End: Closed
Handlebar / Gas tube diameter: 22/26 mm
Grooves for iron wire: 2-3 slots
Flange diameter: 60 mm
Handle diameter Knob mounted: 30 mm
Reference: TCM30
Brand: Tecnominimoto
Tcm red minibike starter carter. Ignition cover for minibike engine, in red ox aluminium, compatible with: Bzm starter carter. Cs starter carter. Polini starter carter. Tcm starter carter.
Reference: 204.0840
Brand: POLINI
Malaguti piston F12 47 mm 204.0840
Reference: 06 7336
Brand: Malossi
Malossi O-ring diameter 47.3x52.54x2.62 mm for exhaust Malossi code: 06 7336 Malossi O-ring for BSV Dio GP 50 (AF18E) (spare part for muffler 32 7265 discontinued production). Malossi O-ring for BSV Dio SP 50 (AF18E) (spare part for muffler 32 7265 discontinued production). Malossi O-ring for BSV Dio SR 50 (AF18E) (spare part for muffler 32 7265...
Reference: 5219170
Brand: Malossi
Malossi Maxi Fly System clutch and bell 5219170 for Mbk and Yamaha engines Malossi code: 5219170 Malossi Maxi Fly System clutch and bell with 107 mm diameter bell for Mbk and Yamaha engines.
Reference: 4418916
Brand: Malossi
Malossi MB4L-B gel battery 4418916 Code: 4418916 TECHNICAL FEATURES -Ready to use, does not require maintenance -Factory Activated (VRLA) -Waterproof -Multi-position mounting -Sulphation of the plate reduced to a minimum -Suitable for cold climates -No contact with acids -Longer duration -Complies with the European regulation 2021 -Voltage 12
Reference: 242.353
Brand: POLINI
Polini rollers 20x17, 6 pieces Ean code 8054705077906
Reference: 204.0957/C
Brand: POLINI
Piston Vespa 125cc 2t 58 mm C (57.960 mm) 204.0957/C
Reference: 112.286.00
Brand: GRC
Minimoto water tank vent fitting. Tank vent measurements: Total length: 22 mm. Thread length: 6 mm. Pipe connection length: 12 mm. Nut length: 4 mm. Thread diameter: 6 mm. Pipe connection diameter: 5.5 mm. Internal diameter: 3.5 mm.
Reference: 01.SB.0306.L
Brand: Ohvale
Ohvale Seal valve stem Code: 01.SB.0306.L
Reference: 01.TE.0027.L
Brand: Ohvale
Ohvale GP-0 GP-2 frame bolt kit. Ohvale code: 01.TE.0027.L Compatible with all GP-0 and GP-2 models.
Reference: Xmts.inox.40
Brand: XRACING
Stainless steel xmotorstore exhaust manifold, for Cs Iame 40cc engine. Made by hand in Italy, the union of the first choice stainless steel material and the craftsmanship make the collector performant for racing use and resistant to any extreme conditions. The heat resistance and the ability to quickly dispose of the exhaust gas make the collector...
Reference: 5211888
Brand: Malossi
Adjustable automatic clutch Malossi Maxi Delta clutch 5211888 Malossi code: 5211888 Adjustable automatic clutch Maxi Delta clutch for clutch bell diameter 135 mm.
Reference: 1612208
Brand: Malossi
Malossi phbg 21 ds 1612208 fuel system Malossi code: 1612208 Malossi phbg 21 bs fuel system with mixer connection Application: Malossi fuel system for APRILIA RS 50 2T LC (MINARELLI AM 3 > 6) for vehicles PRODUCED 2000 --> Malossi fuel system for APRILIA TUONO 50 2T LC (MINARELLI AM 6) Malossi fuel system for BETA RR ENDURO 50 2T LC (MINARELLI AM...
Reference: 6113132
Brand: Malossi
Malossi Fixed Half Pulley Malossi Code: 6113132
Reference: 246410113
Brand: Evok
EVOK Iron LED rear light with brake light, 22 LED, Plug&Play, for Piaggio Vespa 50 Special and Special Elestart, product code 246410113. Bright LED output. Not road approved.
Domino cross grips 6131
Pair of Off-road grips.
Special ultra soft rubber finish for an excellent grip.
Without raised area in the back.
Material: Thermoplastic rubber
Length: right 120 mm / left 123 mm
End: Closed
Handlebar / Gas tube diameter: 22/26 mm
Grooves for iron wire: 2-3 slots
Flange diameter: 60 mm
Handle diameter Knob mounted: 30 mm
