- New
Xmotorstore Payments
Water temperature sensor M10 40 cm A2152. This K-technology thermocouple sensor with 10mm metric thread can be connected either to the motor head if the motor has a hole designed to install this sensor or this sensor can be installed on an aluminum durit adapter, ref. A261, A262, A263, A264.
Note: This sensor must be used with an A3401 extension cable or A2190 hub.
Water temperature sensor M10 40 cm A2152. This K-technology thermocouple sensor with 10mm metric thread can be connected either to the motor head if the motor has a hole designed to install this sensor or this sensor can be installed on an aluminum durit adapter, ref. A261, A262, A263, A264.
Note: This sensor must be used with an A3401 extension cable or A2190 hub.
Reference: 01.TE.0305.L
Brand: Ohvale
Original yellow MY25 frame for Ohvale GP-0 160 EVO. Codice Ohvale: 01.TE.0305.L The frame is not an item intended for generic replacement but a component sold only in case of damage that makes the previous frame unusable. it is therefore possible to purchase it only and exclusively after returning the damaged "old frame".
Reference: 143.340.042
Brand: POLINI
Polini silencer support bracket and tail. Polini Code: 143.340.042
Reference: 1010
Brand: STAMAS
Chain tensioner factory Stamas. ATTENTION: Color may change without notice.
Reference: 3117547
Brand: Malossi
Malossi cylinder diameter 61 in aluminum with pin diameter 14 H2O 4T Malossi code: 3117547
Reference: 209.0153
Brand: POLINI
Gaskets series for Sachs s.6000 209.0153 Code: 209.0153 Polini gaskets series for: Polini, Sachs, Sachs 50
Reference: 6114856B
Brand: Malossi
Malossi mobile half-pulley for MULTIVAR 2000 variator Malossi code: 6114856B
Reference: 144.040.003
Brand: POLINI
Polini Xp4 110/125 2007 head gasket. Polini code: 144.040.003
Reference: 3219559
Brand: Malossi
Malossi 3219559 exhaust for Mhr Team 3 racing scooter diameter 47 mm Code: 3219559 Scooter Racing Malossi mufflers have been designed and built with a single goal: to achieve the maximum possible performance in combination with the cylinder for which they were designed. Each evolutionary step of the Malossi exhaust systems is the result of fluid dynamic...
Reference: 215.0439
Brand: POLINI
Intake manifold Minarelli AM6 Derbi for carburetors 23-24 rotatable 360 degrees. Manifold compatible with: APRILIA: AF1 50 MINARELLI AM6 - MX 50 Minarelli AM6 - RS 50 from 2006 -> (DERBI D50B) - RS 50 MINARELLI AM6 - RS4 50 (DERBI D50B) - RX 50 MINARELLI AM6 - RX-SX 50 from 2006-> (DERBI D50B) - TUONO 50 Minarelli AM6 BETA: RR 50 AM6 (1999-2002) -...
Reference: GHR 045.001
Brand: GHR
Minimoto bell 80mm M10 Ghr. The 80 mm diameter minimoto bell with M10 pinion thread is compatible with Cs, Ghr, Iame, Bzm bell casings.
Reference: 01.SB.0324.L
Brand: Ohvale
Ohvale Sprocket chain Code: 01.SB.0324.L
Reference: 143.710.004
Brand: POLINI
Steel gp4 adjustable steering switch
Reference: 050223
Brand: T4TUNE
SUPERBIKE CARBON adhesive tank protection. Universal for motorcycles. Tank protection dimensions: Height at the highest point: 23 cm (Tips) Central height: 21 cm (Between half moon and lowest point). Upper part width: 12.5 cm Lower part width: 5 cm
Reference: 5518588B
Brand: Malossi
Malossi Digitronic Mhr code 5518588B digital electronic control unit Malossi digital electronic control unit Digitronic Mhr Team with Trimmer. The MHR range is equipped with a non-remappable variable advance ECU.
Reference: 01.SB.1401.L
Brand: Ohvale
Ohvale Ignition coil mod. 110A Code: 01.SB.1401.L
Water temperature sensor M10 40 cm A2152. This K-technology thermocouple sensor with 10mm metric thread can be connected either to the motor head if the motor has a hole designed to install this sensor or this sensor can be installed on an aluminum durit adapter, ref. A261, A262, A263, A264.
Note: This sensor must be used with an A3401 extension cable or A2190 hub.