- On sale!
- Reduced price
- New
Xmotorstore Payments
Polini Variator for Hi speed Yamaha T Max 500 12 rollers.
Code: 241.695
Variator supplied with two series of 8,3 gr 25x11 rollers. and 7.5 gr.
Application: Variator for Yamaha, Variator for Yamaha T Max 500 Injection / 500 Carburetor
Polini Variator for Hi speed Yamaha T Max 500 12 rollers.
Code: 241.695
Variator supplied with two series of 8,3 gr 25x11 rollers. and 7.5 gr.
Application: Variator for Yamaha, Variator for Yamaha T Max 500 Injection / 500 Carburetor
Reference: 241.696
Brand: POLINI
Polini Variator for Hi speed Yamaha T Max 500 12 rollers evolution 3 Code: 241.696 Variator supplied with two series of 8,3 gr 25x11 rollers. and 7.5 gr. Application: Variator for Yamaha, Variator for Yamaha T Max 500 Injection / 500 Carburetor
Reference: 241.714
Brand: POLINI
Polini Variator for Hi-speed Yamaha T Max 500 injection Code: 241.714 Variator supplied with two series of rollers 25x14.8 of 13 gr. and 15 gr. Application: Variator for Yamaha, Variator for Yamaha T Max 500 Injection
Reference: 248.103
Brand: POLINI
Polini variator belt for Yamaha T Max 500 Aramid. Code: 248.103 Application: Yamaha, Yamaha T Max 500
Reference: 083023
Brand: C4
X-Max X-City 125 crankshaft, for R.O. 39D-E1400-30. Crankshaft compatible with: Mbk, Yamaha.
Reference: 9005 L
Brand: STAMAS
Side brackets radiator support Stamas race
Reference: 144.055.001
Brand: POLINI
Polini Minimotard clutch crankcase gasket. Polini Code: 144.055.001
Reference: 209.0180
Brand: POLINI
Series of gaskets for Motobecane diameter 46 mm 209.0180 Polini gaskets series for: Motobecane, Motobecane 51, Motobecane 92GT, Motobecane M16, Polini Code: 209.0180
Reference: FMSA47-64-45
Brand: BMC
Bmc double conical air filter. Bmc code: FMSA47-64-45 Number of Flanges: 2 Flange length: 22mm Flange Internal Diameter Ø1: 47 mm Height - H2: 67mm H1: 45mm Flange Center - Center I: 64 mm External Length Base A: 153 mm External Width Base B: 97 mm Width Offset C: 8mm Top Material/Finish: Polyurethane
Reference: 204.0815/C
Brand: POLINI
Polini piston 40,2mm pin 10mm section C 204.0815/C
Reference: 1012
Brand: STAMAS
Front fairing support tube sr r factory Stamas
Reference: 01.SE.0204.B
Brand: Ohvale
Black fuel tank cap for Ohvale GP-0 and GP-2. Original part with anodized finish – Code 01.SE.0204.B.
Reference: 204.0957/A
Brand: POLINI
Piston Vespa 125cc 2t 58 mm A (57.940 mm) 204.0957/A
Reference: 1615907
Brand: Malossi
Malossi phbl 25 bs fuel system for Vespa 1615907 Malossi code: 1615907 Fuel system Malossi phbl 25 bs lamellar to the cylinder 2nd series for Vespa ET3 PRIMAVERA 2T 125 CC Application: Malossi fuel system for Vespa ET3 Primavera 125 2T to be combined only with thermal units 3115829-3117681 (3116326-3114930: production discontinued) Malossi fuel system for...
Reference: 3116144
Brand: Malossi
Malossi cylinder diameter 49 in aluminum with pin diameter 10 4T Malossi code: 3116144
Reference: 144.225.001
Brand: POLINI
Polini water pocket connector Polini water pocket fitting for: Bultaco, Bultaco Astro 50, Bultaco Lobito 50, Derbi, Derbi GPR 50, Derbi Senda 50 DRD R, Derbi Senda 50 Extreme, Derbi Senda 50 R, Gilera, Gilera SMT 50, Gilera RCR 50, Gilera GSM 50, Gilera H @ K, Gilera ZULU, Polini, Aprilia, Aprilia SR 50 2T R, Aprilia SR 50 2T Factory, Piaggio, Piaggio...
Reference: 5518429
Brand: Malossi
Malossi Force Master electronic control unit 0 code 5518429 Malossi Force Master 0 electronic control unit The Force Master ECU allows you to vary the injection to adapt perfectly to the Malossi and original 4 stroke cylinders. Carburation adjustment ± 6% at min/average/max Rev limiter: +1,700 RPM Original 8,800 - Malossi 10,500 (*) 3 different mappings...
Reference: 02 6265B
Brand: Malossi
Malossi intake manifold 13x16 mm 02 6265B Code: 02 6265B Malossi intake manifold for Sha 13 carburetors
Reference: 4517008
Brand: Malossi
Mudguard for Malossi crankcase 4517008 Malossi code: 4517008. Mudguard for Malossi C/RC-One crankcase for 12-13" wheels.
Polini Variator for Hi speed Yamaha T Max 500 12 rollers.
Code: 241.695
Variator supplied with two series of 8,3 gr 25x11 rollers. and 7.5 gr.
Application: Variator for Yamaha, Variator for Yamaha T Max 500 Injection / 500 Carburetor