Xmotorstore Payments
Piaggio big evolution cylinder base gasket thickness 0.30 mm (10 pieces). Polini Code: 254.0130
Piaggio big evolution cylinder base gasket thickness 0.30 mm (10 pieces). Polini Code: 254.0130
Reference: 254.0127
Brand: POLINI
Piaggio big evolution cylinder base gasket 0.05 mm thick (10 pieces). Polini Code: 254.0127
Reference: 254.0128
Brand: POLINI
Piaggio big evolution cylinder base gasket, 0.10 mm thick (10 pieces). Polini Code: 254.0128
Reference: 254.0129
Brand: POLINI
Piaggio big evolution cylinder base gasket 0.15 mm thick (10 pieces). Polini Code: 254.0129
Reference: 243.102
Brand: POLINI
Polini contrast spring for Piaggio Evo slider 4.5 mm diameter Code: 243.102 ATTENTION: If used on Yamaha engines, it can only be mounted in conjunction with the Polini Speed Drive. Application: Aprilia, Aprilia Scarabeo 50 2T Street restyling Piaggio / 50 4T 2V Restyling Piaggio / 50 4T 4V Piaggio from 2009, Aprilia Sr 50 2T R, LC / 50 2T R, / 50 2T R,...
Reference: 01.SD.0903.L
Brand: Ohvale
Ohvale Gasket pump oil Code: 01.SD.0903.L
Reference: 1112449
Brand: Malossi
Complete Malossi gasket kit for 50 diameter cylinder kit (for Minarelli AM 3 > 6 engines) Malossi code: 1112449
Reference: 4613162
Brand: Malossi
Pair of Malossi Twins rear shock absorbers 4613162 Malossi code: 4613162 Pair of Malossi Twins rear shock absorbers 305 mm wheelbase Technical features: -Type: oil-pneumatic shock absorber -Road use -12 mm shock absorber rod in hardened and tempered C43 steel -Piston in steel and sintered bronze -New Swedish steel lamellar system -Piston guide shoe of the...
Reference: 03.AS.0070.L
Brand: Ohvale
Rain cover for Ohvale air filter. Ohvale part number: 03.AS.0070.L Ohvale has produced a dedicated rain cover for the air filter for models using the Dell'orto PHBH 28 and PHBL 24 carburettor. The Rain Cover was developed with the aim of protecting the air filter and reducing its exposure and any water infiltration due to extreme wet track conditions....
Reference: 01.SZ.0119.L
Brand: Ohvale
Ohvale Inlet pipe gasket Code: 01.SZ.0119.L
Reference: 246410104
Brand: Evok
Complete EVOK Iron LED front headlight for Vespa 125 Primavera and ET3, product code 246410104. 12V LED 6000K up to 7000 lumens, voltage converter included, Plug&Play installation with anti-flicker system. Not road homologated.
Reference: 01.SB.0314.L
Brand: Ohvale
Ohvale Gamp shaft complete Code: 01.SB.0314.L
Reference: 175.0057
Brand: POLINI
Polini brake disc for Piaggio Zip, Mbk Booster diameter 155 mm Code 175.0057 Application: Aprilia, Aprilia Amico 50, Aprilia Sonic 50/50 Gp, Bsv, Bsv Ax 50, Bsv Jx 50 Gz / 50, Derbi, Derbi Vamos 50, Fantic motor, Fantico motor Big wheel 50, Garelli, Garelli Pony 50 racing, Garelli Sr, Gilera, Gilera Easy Moving 50, Italjet, Italjet Piasta 50 92, Italjet...
Reference: 140.0065/10ST
Brand: POLINI
Polini cylinder kit diameter 43 mm, pin diameter 10 mm without head. Polini code: 140.0065 / 10ST Polini cylinder kit for: Piaggio, Piaggio Boxer, Piaggio Bravo, Piaggio CBA, Piaggio Ciao, Piaggio Eco, Piaggio Grillo, Piaggio Si, Gilera, Gilera Cba 10 mm diameter pin Headless Cast iron cylinder
Reference: 143.750.005
Brand: POLINI
Polini 910 RS minimoto front brake caliper. Polini Code: 143.750.005 Polini 910 RS hull minimoto brake caliper, compatible with 5-inch and 6.5-inch versions.
Reference: 215.0163
Brand: POLINI
Polini intake manifold for Vespa PK-ETS-XL-HP 50cc 125cc 3 holes carburetor cp. Polini Code: 215.0163 Can be combined with the Polini CP Ø 24 carburettor cod. 201.2402
Reference: 6114582
Brand: Malossi
Malossi rear pulley assembly with d.134 mm Malossi code: 6114582 Malossi rear pulley assembly for APRILIA MOJITO CUSTOM 50 2T only for OVER RANGE MHR ALUMINUM. Malossi rear pulley assembly for APRILIA SR carb. 50 2T LC 2004 PIAGGIO only for OVER RANGE MHR ALUMINUM. Malossi rear pulley assembly for APRILIA SR MOTARD 50 2T euro 2 only for OVER RANGE MHR...
Reference: 209.0005
Brand: POLINI
Gasket set for Vespa 125 double intake 209.0005 Polini gasket set for: Vespa, Vespa 125, Polini, Piaggio Code: 209.0005
Reference: 01.PE.0013.L
Brand: Ohvale
Gear shift rod tie rod Gp-0 160 and 190 (No Evo). Ohvale Code: 01.PE.0013.L Specific for Gp-0 160 and 190 cc, NOT compatible with 110 4S, and EVO versions. Rod length: 22.7 cm.
Reference: 13 4814b
Brand: Malossi
Malossi sleeve for PHBL 19 - 25 carburetors (37 mm) Malossi code: 13 4814b
Piaggio big evolution cylinder base gasket thickness 0.30 mm (10 pieces). Polini Code: 254.0130
