Xmotorstore Payments
Rain cover for Ohvale air filter. Ohvale part number: 03.AS.0070.L Ohvale has produced a dedicated rain cover for the air filter for models using the Dell'orto PHBH 28 and PHBL 24 carburettor.
The Rain Cover was developed with the aim of protecting the air filter and reducing its exposure and any water infiltration due to extreme wet track conditions.
These extreme conditions can occur for:
- Incessant rains.
- Abundant quantity of water present on the track.
- Poorly draining asphalt.
- Dips or slopes that create pockets and streams of water.
In these cases, water could pass through the air filter and lead to irregular engine operation.
It is therefore recommended to use it only during these conditions and not to keep it mounted on the bike by default.
The rain cover for the air filter is approved for the official Ohvale sports activity.
Rain cover for Ohvale air filter. Ohvale part number: 03.AS.0070.L Ohvale has produced a dedicated rain cover for the air filter for models using the Dell'orto PHBH 28 and PHBL 24 carburettor.
The Rain Cover was developed with the aim of protecting the air filter and reducing its exposure and any water infiltration due to extreme wet track conditions.
These extreme conditions can occur for:
- Incessant rains.
- Abundant quantity of water present on the track.
- Poorly draining asphalt.
- Dips or slopes that create pockets and streams of water.
In these cases, water could pass through the air filter and lead to irregular engine operation.
It is therefore recommended to use it only during these conditions and not to keep it mounted on the bike by default.
The rain cover for the air filter is approved for the official Ohvale sports activity.
Reference: 01.AS.0315.L
Brand: Ohvale
Gp-0 Gp-2 160 4S intake manifold. Ohvale code: 01.AS.0315.L Aluminum intake manifold for Ohvale Gp-0 Gp-2 160 cc 4S, for Dellorto PHBH 28 carburettor.
Reference: 01.AS.0016.L
Brand: Ohvale
Ohvale air filter diameter 42 mm. Ohvale code: 01.AS.0016.L Mesh air filter for Ohvale, with 42 mm diameter carburettor inlet.
Reference: 01.AS.0133.L
Brand: Ohvale
Intake manifold rubber connector for Ohvale 190. Compatible with Dellorto PHBH 28 and Keihin carburetors. Code: 01.AS.0133.L.
Reference: 01.SW.0122.L
Brand: Ohvale
Ohvale Inlet pipe gasket Codice: 01.SW.0122.L
Reference: 241.647
Brand: POLINI
Polini Variator for Kymco 50 4T Agility Code: 241.647 Variator with pulley diameter 95 mm Application: Garelli, Garelli Capri 50 4T, Garelli Ciclone 50 4T, Garelli Vip 50 new 4T, Kymco, Kymco Agility 50 4T / 50 4T E2, Kymco Filly 50 4T, Kymco People 50 S 4T / 50 2T, Kymco Super 8 50 4T , Kymco Dink 50 4T, Sym, Sym Fiddle II 50 4T, Sym Symphony 50 4T, Sym...
Reference: 206.0335
Brand: POLINI
Polini segment diameter 39.98x1 mm chromed 206.0335
Reference: 01.SD.0106.L
Brand: Ohvale
Ohvale Bolt stud M6x32 Code: 01.SD.0106.L
Reference: 176.0187
Brand: POLINI
Original Polini rear brake shoe (without spring) d.135X16 mm Code 176.0187 Application: Piaggio, Piaggio Boss, Piaggio Boxer, Piaggio Bravo, Piaggio Cba, Piaggio Ciao, Piaggio Eco, Piaggio Grillo, Piaggio Si, Piaggio Superbravo, Piaggip Trend, Gilera, Gilera Cba This brake shoe for Polini is compatible as an original spare.
Reference: 285.0004
Brand: POLINI
APRILIA: RX-SX 50 dal 2006-> (DERBI D50B) - RS 50 dal 2006 -> (DERBI D50B) - RS4 50 (DERBI D50B)DERBI: GPR 50 racing dal 2006-> (DERBI D50B) - SENDA 50 DRD - SM dal 2006-> (DERBI D50B)GILERA: RCR 50, SMT dal 2006-> (DERBI D50B)VALENTI RACING: RME, SM (DERBI D50B) 20x35x7 n.2
Reference: 97980831C
Brand: Ducati
Original Ducati Performance Enduro accessory kit for Multistrada 950, 950 S, V2, and V2 S. Includes engine guards, radiator protection, and additional LED lights. Part no. 97980831C.
Reference: 01.SW.0606.L
Brand: Ohvale
Ohvale Right crankcase block Code: 01.SW.0606.L
Reference: 249.030
Brand: POLINI
Clutch Yamaha Majesty 250 model 2000 diameter 145 mm Code: 249.030 Diameter: 145 mm Weight: 1357 gr. Application: Aprila, Aprila Leonardo 300, Malaguti, Malaguti Password 250, Mbk, Mbk Kilibre 300, Mbk Skycruiser 250, Mbk Evolis 250 4T ie from 2014, Peugeot, Peugeot Satelis 125, Renault, Renault Kouranos 250, Yamaha, Yamaha Majesty 250 from 2000, Yamaha...
Reference: 075111
Brand: C4
Derbi Senda E3 bearing and cylinder gasket kit
Reference: A2155
Brand: Alfano
Alfano candle temperature sensor 14 mm A2155. This K thermocouple sensor needs to be installed with a 14mm diameter plug cable length 40cm. Caution: It is important to remove the sealing washer from the spark plug before installation. Note: This sensor must be used with an A3401 extension cable or A2190 hub.
Reference: 6112672
Brand: Malossi
Malossi VENTILVAR 2000 half-pulley Malossi code: 6112672 Malossi half-pulley for BENELLI CAFFèNERO 150 4T LC euro 3 QJ158MJ. Malossi half-pulley for HONDA @ 125 4T LC. Malossi half-pulley for HONDA @ 150 4T LC. Malossi half-pulley for HONDA DYLAN 125 4T LC. Malossi half-pulley for HONDA DYLAN 150 4T LC. Malossi half-pulley for HONDA PANTHEON 125 ie 4T...
Reference: 5512792
Brand: Malossi
Malossi Tc Unit 5512792 electronic control unit Code: 5512792 Malossi Tc Unit K15 electronic control unit
Reference: A45041C4043B7-0
Brand: Domino
Domino A450 Road Racing grips couple. Pair of two-component thermoplastic rubber motorcycle grips with multi-tone finish. Material: Two-component thermoplastic rubber Length: 120mm / 125mm End: Open Handlebar / Gas tube diameter: 22/26 mm Grooves for iron wire: 2-3 slots Flange diameter: 47 mm Handle diameter Knob mounted: 31.5 mm
Reference: 343.0800
Brand: POLINI
Polini carburetor nozzle bush Cp. Polini Code: 343.0800
Reference: 211.0298
Brand: POLINI
Polini cylinder head diameter 47.4 mm for flat piston Polini cylinder head for: Derbi, Derbi Atlantis 02, Gilera, Gilera Easy moving 50, Gilera Ice 50, Gilera Stalker 50, Gilera Storm 50, Gilera Typhoon 50, Piaggio, Piaggio Diesis, Piaggio Extrem, Piaggio Fly 50, Piaggio Free, Piaggio Liberty 50, Piaggio ZIP 50, Polini
Rain cover for Ohvale air filter. Ohvale part number: 03.AS.0070.L Ohvale has produced a dedicated rain cover for the air filter for models using the Dell'orto PHBH 28 and PHBL 24 carburettor.
The Rain Cover was developed with the aim of protecting the air filter and reducing its exposure and any water infiltration due to extreme wet track conditions.
These extreme conditions can occur for:
- Incessant rains.
- Abundant quantity of water present on the track.
- Poorly draining asphalt.
- Dips or slopes that create pockets and streams of water.
In these cases, water could pass through the air filter and lead to irregular engine operation.
It is therefore recommended to use it only during these conditions and not to keep it mounted on the bike by default.
The rain cover for the air filter is approved for the official Ohvale sports activity.
