- On sale!
- Reduced price
- New

Xmotorstore Payments
Polini thermal group for Vespa Primavera 125 diameter 57 mm. Polini Code: 140.0050
Reference: 201.2103
Brand: POLINI
Polini 21 carburetor with filter for Vespa 125 cc. It is mounted on the original Piaggio manifold and union diameter 19 (23x30). Polini carburetor settings for vespa: Maximum jet 96 Minimum Jet 40 Needle 14/22 24x30 valve Pulverizer bush d.2,7 Polini Code: 201.2103
Reference: 200.0400
Brand: POLINI
Vespa 125 primavera et3 evolution turned muffler, code 200.0400 Exhaust for Vespa: Vespa, Vespa 125 2t spring, spring Vespa 125 et3 The exhaust is mounted only with the cylinder turned, with slightly modified frame and without the start lever. The exhaust is not painted
Reference: 200.2025
Brand: POLINI
Polini muffler for Vespa 125 Primavera ET3 approved (DGM.37519 S.). Polini Code: 200.2025. The Polini 200.2025 muffler is compatible with: VESPA: VESPA 125 2T PRIMAVERA - VESPA 125 2T PRIMAVERA ET3. Engine type: VMB 1M. Approved for: Piaggio Vespa 125 Primavera ET3: VMB 1T
Reference: 270 13 18NC
Brand: PBR
Pinion pitch 420 for Ohvale, available from Z13 to Z17
Reference: 272.0110
Brand: POLINI
Polini pin stop diameter 13 mm. Polini Code: 272.0110 Polini pin stop
Reference: 204.0730
Brand: POLINI
Polini piston diameter 47 mm for racing kit. Polini Code: 204.0730 Polini piston for: Aprilia, Aprilia Habana 50, Atala, Atala Byte 50, Atala Hacker 50, Derbi, Derbi Vamos 50, Italjet, Italjet Formula 50, Italjet Torpedo 50, Italjet Velocifero 50, Malaguti, Malaguti Crosser 50, Polini, Siam, We are Scross, Suzuki, Suzuki Address 50, Suzuki Aj 50, Suzuki...
Reference: 7717645B
Brand: Malossi
Malossi Maxi Wing clutch bell 7717645B Malossi code: 7717645B Internal diameter 134 mm. External diameter 151 mm. Weight 1132 grams. Technical features: -Bell made of mild steel sheet for deep drawing. -Hub in special turned, welded and broached steel. -Workplace turned within very strict values. -Total dynamic balancing. -Soft nitriding heat treatment.
Reference: 01.SZ.0903.L
Brand: Ohvale
Ohvale 110 4S desmodromic gearbox. Ohvale code: 01.SZ.0903.L
Reference: A2153
Brand: Alfano
Water temperature sensor 1/8 GAS 40 cm A2153. This 1 / 8GAS threaded thermocouple K-technology sensor can be connected to the motor head if the motor has a hole designed to install this sensor. Note: This sensor must be used with an A3401 extension cable or A2190 hub.
Reference: 61 3538B
Brand: Malossi
Malossi driven pulley d.70 Malossi code: 61 3538B Malossi pulley for ITALJET PACK 50 2T. Malossi pulley for PIAGGIO BOSS 50 2T. Malossi pulley for PIAGGIO BRAVO 50 2T. Malossi pulley for PIAGGIO CIAO 50 2T. Malossi pulley for PIAGGIO CIAO PX 50 2T. Malossi pulley for PIAGGIO GRILLO 50 2T. Malossi pulley for PIAGGIO SI 50 2T. Malossi pulley for PIAGGIO...
Reference: 143.800.069
Brand: POLINI
Front mudguard for Polini 910 S minibike, black colour. Original Polini front mudguard for minibike 910 S and RS fairing, in black version. Polini code: 143.800.069
Reference: 01.SZ.0318.L
Brand: Ohvale
Ohvale Controlling arm assembly clutch Code: 01.SZ.0318.L
Reference: 55 8675
Brand: Malossi
Malossi electronic unit Tc Unit Rpm control 55 8675 Code: 55 8675 The incessant development of electronics in the motor sector has led Malossi to the creation and marketing of a complete line of electronic control units for road and racing scooters which embody the utmost technology. Each control unit model has been expressly studied for the scooter on...
Reference: Molle.rac.cs
Brand: CS Racing
Cs muffler exhaust fitting springs. Short cs minibike muffler springs, these springs are applied between the "cylinder" connection and the exhaust manifold. Attention: pair of springs, specific for Cs minibike muffler. Total spring length 35 mm. Unloaded spring length (L0) 32 mm. Spring length without eyelet (Lk) 17 mm. External diameter of the coils (De)...
Reference: 4617076
Brand: Malossi
Malossi RS24 front shock absorber for Vespa 4617076 Malossi code: 4617076 Rs24 front Malossi shock absorber, wheelbase 275 mm. RS24 SHOCK ABSORBER Regenerable oil-pneumatic shock absorber with bilamellar piston and diaphragm compensation. -Piston Ø 36 mm with two independent disc packs: one in extension and one in compression; harmonic steel lamellar...
Reference: 31 7903
Brand: Malossi
Malossi cast iron cylinder kit diameter 47 for Piaggio Ape 50 cc / Vespa PK - PK HP - PK XL - Special 50 cc Malossi code: 31 7903 Malossi cylinder kit for PIAGGIO APE 50 2T 1989. Malossi cylinder kit for PIAGGIO APE FL 50 2T 1989-1990. Malossi cylinder kit for PIAGGIO APE FL2 50 2T 1990-1995. Malossi cylinder kit for PIAGGIO APE FL3 50 2T 1996-1999....
Reference: 200.2022
Brand: POLINI
Polini muffler for Vespa Pe 200 original model. Polini Code: 200.2022. The Polini 200.2022 muffler is compatible with: VESPA: VESPA 200 2T PE, PX
Reference: 2311.03-02
Brand: Domino
Domino HR cross throttle with gas cover, ball bearing and closed black 1150 model grips. Domino Code: 2311.03-02 Support material: Aluminum Support finish: Painted Black colour Max stroke: 50 mm Rapidity: 1.9 ° / mm Cable Type: Mono Cable
Reference: 11 4573
Brand: Malossi
Complete Malossi gasket kit for cylinder kit diameter 55 - 57.5 for Ape - Vespa 50 cc Malossi code: 11 4573
Polini thermal group for Vespa Primavera 125 diameter 57 mm. Polini Code: 140.0050