Xmotorstore Payments
280 mm adjustable gas shock absorber, compatible as shock absorber for Mbk Booster, Nitro, Ovetto and Yamaha Aerox, Bw's, Neo, Spy.
280 mm adjustable gas shock absorber, compatible as shock absorber for Mbk Booster, Nitro, Ovetto and Yamaha Aerox, Bw's, Neo, Spy.
Reference: 7008
Brand: STAMAS
Stamas standard internal rear hub spacer
Reference: 3218017B
Brand: Malossi
Malossi Rx silencer black 3218017B Code: 3218017B
Reference: 143.680.002
Brand: POLINI
Polini minimoto starter wheel, compatible with Polini starter and others. The rope winder wheel is used to engage the ignition with the flywheel, in order to start the minimoto. Wheel external diameter: 71 mm Rope channel: 3.5 mm Polini Code: 143.680.002
Reference: 3216592
Brand: Malossi
Malossi WILD LION approved exhaust Malossi code: 3216592 Malossi exhaust for CPI OLIVER 50 2T 2003. TYPE: JR var.45 ver.4. The "TYPE" only specifies for which model the approval is valid, it does not limit its assembly.
Reference: 5514750
Brand: Malossi
Lambda emulator TC UNIT O2 Malossi controller 5514750 Code: 5514750 To further optimize carburetion and transient performance, the use of the O2 controller is recommended. In the latest generation motorbikes, the control unit, thanks to the lambda probe, is able to correct the quantity of fuel that must be injected so that the carburetion is constant,...
Reference: A2501
Brand: Alfano
Lambda sensor Alfano 40 cm A2501. This LAMBDA sensor must be installed on the exhaust. The value read by this 2-wire lambda probe is effective when the exhaust gases are equal to or greater than 300 °, i.e. only during the acceleration phase. Note: this sensor must be used with an extension cable ref. A3401. Designed for the module: Box12.
Reference: 5519475
Brand: Malossi
Malossi Force Master 2.1 5519475 Electronic Control Unit for Honda Code: 5519475
Reference: 204.0759/B
Brand: POLINI
Polini piston diameter 47.6 mm selection B (47.555 mm) Polini piston for: Butalco, Butalco Astro 50, Butalco Lobito 50, Derbi, Derbi Gpr 50, Derbi Senda 50, Gilera, Gilera Smt 50, Gilera RCR 50, Gilera GSM 50, Gilera H @ K, Gilera ZULU, Polini
Reference: 171.0649
Brand: POLINI
VESPA: VESPA 125 2T PK - VESPA 125 2T PRIMAVERA - VESPA 125 2T XL - VESPA 50 2T SPECIAL - VESPA 125 2T PRIMAVERA ET3 - VESPA 125 2T ETS - VESPA 50 2T PK - VESPA 50 2T XL
Reference: 01.SW.0306.L
Brand: Ohvale
Ohvale Bolt M6x90 Code: 01.SW.0306.L
Reference: 171.0010
Brand: POLINI
Lambda probe emulator Yamaha Aerox 50 4T Euro4 '18 Application: Yamaha Aerox 50 4T R LC ie E4 from 2018, Yamaha Neo'S 50 4T LC ie E4 from 2018
Reference: 01.SW.0812.L
Brand: Ohvale
Ohvale Countershaft transmission Code: 01.SW.0812.L
Reference: 53 7626
Brand: Malossi
Malossi complete connecting rod 53 7626 Malossi code: 53 7626 Malossi complete connecting rod with 12 mm diameter pin.
Reference: 243.043
Brand: POLINI
Polini contrast springs kit for Piaggio, Mbk Booster evolution Code: 243.043 Attention! The Evolution belt, Speed drive and contrast spring components must only be assembled together. Application: Aprilia, Aprilia Area 51, Aprilia Gulliver 50/50 Lc, Aprilia Rally 50/50 LC, Aprilia Scarabeo 50 2T / 50 2T street restyling Piaggio, Aprilia Sr 50 2T R / 50...
Reference: 3114851
Brand: Malossi
Complete cylinder Malossi I - TECH 4T diameter 63 in aluminum with pin diameter 14 H2O Malossi code: 3114851 Malossi cylinder for Yamaha 135 ie 4T LC from 2011 (T135). Malossi cylinder for Yamaha Crypton X 4V 135 ie 4T LC from 2011 (T135). Malossi cylinder for Yamaha Exciter 135 ie 4T LC from 2011 (T135). Malossi cylinder for Yamaha Jupiter MX 135 ie 4T...
Reference: 260.018
Brand: POLINI
Polini minimoto tie rods and spare parts. Compatible with 2-mass clutch. Polini Code: 260.018
280 mm adjustable gas shock absorber, compatible as shock absorber for Mbk Booster, Nitro, Ovetto and Yamaha Aerox, Bw's, Neo, Spy.
