- Reduced price
- New
Xmotorstore Payments
Dell’Orto PHBL 24 carburetor, pre-jetted and ready to use for Ohvale GP-0 110 4S EVO. Tuned for 110cc 4-speed engine. Code 01.AS.0254.L.
Dell’Orto PHBL 24 Carburetor – Ohvale GP-0 110 4S EVO – Code 01.AS.0254.L
The Dell’Orto PHBL 24 carburetor is an official Ohvale component, pre-configured and race-ready for the GP-0 110cc 4-stroke 4-speed engine.
It features dedicated Ohvale factory jetting, optimized for track performance, smooth throttle response, and reliability, ideal for those keeping the engine in stock configuration.
Model: Dell’Orto PHBL 24
Application: Ohvale GP-0 110 4S EVO
Code: 01.AS.0254.L
Status: Pre-jetted and ready to install
Use: Track/racing
Compatible with Ohvale factory venturi and air filter setups
Quick install, no tuning needed—ideal for performance with factory precision.
✅ Official Ohvale part
✅ Pre-jetted for 110 4S EVO
✅ Plug & play racing carb
✅ Smooth, responsive fueling
Reference: 01.AS.0270.L
Brand: Ohvale
Dellorto 24 conversion kit for Gp-0 110 4s. Ohvale code 01.AS.0270.L DellOrto PHBH 24 carburettor kit with specific calibration for Ohvale GP-0 110 4S. The Kit is inclusive of: Phbh 24 carburettor. Air filter d.42. Gas cable. Air cable. Metal intake manifold. Rubber sleeve. Manifold gasket.
Reference: 03.AS.0070.L
Brand: Ohvale
Rain cover for Ohvale air filter. Ohvale part number: 03.AS.0070.L Ohvale has produced a dedicated rain cover for the air filter for models using the Dell'orto PHBH 28 and PHBL 24 carburettor. The Rain Cover was developed with the aim of protecting the air filter and reducing its exposure and any water infiltration due to extreme wet track conditions....
Reference: 01.AS.0257.L
Brand: Ohvale
Sleeve for intake manifold Ohvale 110 4S Dellorto PHBL 24 carburettor. Ohvale code: 01.AS.0257.L Attention: specific for 24 carburettor.
Reference: 01.AS.0256.L
Brand: Ohvale
Ohvale 110 4s intake manifold for Dellorto carburettor. Ohvale code 01.AS.0256.L Intake manifold for Ohvale with 110 cc 4t 4s engine and PHBL 24 Dellorto carburettor. Purely illustrative photo.
Reference: 01.AS.0106.L
Brand: Ohvale
Ohvale Mesh filter D.49 Code: 01.AS.0106.L
Reference: 01.SZ.0119.L
Brand: Ohvale
Ohvale Inlet pipe gasket Code: 01.SZ.0119.L
Reference: 075114
Brand: C4
Peugeot Ludix h2o cylinder bearing and gasket kit
Reference: 0024476.010.018
Brand: Acerbis
Acerbis Mx Track Orange Kids Motocross Pants. Zip, flap and button closure. Double adjustment at the waist with tape and velcro. Internal knee Cordura® reinforcement on both sides. Foam reinforcement on the knee. High density polyester in the area of contact with the saddle to ensure greater grip, comfort and resistance. Elastics above the knee, front...
Reference: 3111248
Brand: Malossi
Malossi cylinder diameter 63 in aluminum H2O 4T Malossi code: 3111248 Malossi cylinder for Benelli Velvet 125 4T LC. Malossi cylinder for Benelli Velvet 150 4T LC (Yamaha). Malossi cylinder for Italjet Jupiter 125 4T LC. Malossi cylinder for Italjet Jupiter 150 4T LC. Malossi cylinder for Italjet Millennium 125 4T LC. Malossi cylinder for Italjet...
Reference: M099341-V00
Brand: PMT TYRES
Tubeless valve for wheels 6.5" compatible with minimoto wheels Dm, Stamas, Grc.
Reference: A2193
Brand: Alfano
2-input hub for Alfano 6 A2193. HUB with 2 inputs: 20cm plus magnetic / infrared speed. This hub allows the simultaneous connection of an A2201 speed sensor and an A1401 / A1411 infrared sensor or a magnetic sensor. Note: this HUB is specially designed to connect to the green connector of the PROIIIevo, ALFANO6.
Reference: EK520SRX2110
Brand: EK (Enuma Chain)
520 pitch motorcycle chain model EK520SRX2110. EK 520SRX2110 SRX2 series 110-link chain with 520 pitch suitable for motorcycles with a maximum displacement of: 750 cc combined with MLJ joint (Joint to be riveted).
Reference: 3212621
Brand: Malossi
Malossi silencer diameter 70 mm in aluminum for GP MHR exhaust Malossi code: 3212621
Reference: 174.2078
Brand: POLINI
Yamaha sintered brake pads Code: 174.2078 Application: Yamaha, Yamaha Majesty 400, Yamaha T Max 500 Injection
Reference: SAB45004VK
Brand: BMC
Bmc air duct YAMAHA YZF-R6 2006 2007 Washable racing sport SAB45004VK. This Bmc air conveyor is made up of two layers of aluminum mesh with an epoxy coating placed to protect the structure of the mesh, which binds the filtering material in oiled cotton, arranged in several layers. This guarantees a high level of filtering efficiency and minimum loss load,...
Reference: 55 8132
Brand: Malossi
Malossi Tc Unit 55 8132 electronic control unit Code: 55 8132 The incessant development of electronics in the motor sector has led Malossi to the creation and marketing of a complete line of electronic control units for road and racing scooters which embody maximum technology. Each control unit model has been expressly studied for the scooter on which it...
Reference: 3205.82.40.06
Brand: Domino
Pair of Domino black knobs 120mm closed 3205.82.40.06 Pair of thermoplastic rubber knobs. Material: Thermoplastic rubber Black colour Length: 120 mm End: Closed Handlebar / Gas tube diameter: 22/26 mm Flange diameter: 50 mm Handle diameter Knob mounted: 30-33 mm
Reference: GP520SRX2120
Brand: EK (Enuma Chain)
Motorcycle chain 520 pitch gold color model GP520SRX2120. EK GP520SRX120 SRX series chain formed by 120 links with 520 pitch suitable for motorcycles with maximum displacement of: 750 cc combined with MLJ joint (Joint to be riveted).
Reference: 140.0230
Brand: POLINI
Polini cylinder kit for Piaggio 300 cc 4t d.77 without control unit. Polini code: 140.0230 attention: For Euro 3 and 4 engines, combine the kit with the control unit code: 171.0015. For Euro 5 engines, combine the kit with the control unit code: 171.0017. Cylinder compatible with: VESPA: 300 4T GTS, GTV Euro 3 (M454M) - 300 4T GTS, GTV E4 from '17 to '20...
Reference: 1113574
Brand: Malossi
Complete Malossi gasket kit for 47 diameter cylinder kit (multi-thickness) Malossi code: 1113574
Reference: 01.ST.0003.G
Brand: Ohvale
Ohvale Gp-0 steering head. Ohvale Code: 01.ST.0003.G
Reference: 7713368
Brand: Malossi
Malossi Maxi Clutch Bell 7713368 Malossi code: 7713368 Internal diameter 135 mm. Weight 947 grams. Technical features: -Dome in DC04 mild steel, obtained by cold moulding; -Central hub in carbon steel obtained from a bar and restored by TIG welding; - Anti-vibration sheet metal printed and fixed using 3 welding points placed at 120° from each other;...
Dell’Orto PHBL 24 carburetor, pre-jetted and ready to use for Ohvale GP-0 110 4S EVO. Tuned for 110cc 4-speed engine. Code 01.AS.0254.L.