Malossi DIGITRONIC digital electronic control unit 5519970

Reference: A2104

Brand: Alfano

45 cm candle temperature sensor A2104

45 cm candle temperature sensor A2104. This normal version NTC sensor must be installed with a 14mm diameter spark plug. Caution: It is important to remove the sealing washer from the spark plug before installation. Note: This sensor must be used with an A3301 extension cable or A2190 hub.

Reference: N GRAY

Brand: HJC

Hjc i80 helmet

Hjc i80 helmet. "APC" Advanced Polycarbonate Compound: By blending premium polycarbonate with high impact resistant ABS in an optimal ratio, HJC has developed a strong and impact resistant shell, while maintaining a lightweight design. "ACS" Advanced Channeling Ventilation System: 2-level upper vents and lower vents; Full front to back airflow expels heat...

Reference: KOYO 60002

Wheel Bearings minimoto racing KOYO 10x26x8

KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.

Reference: 5219415

Brand: Malossi

Clutch and bell Malossi Maxi Delta System 5219415

Clutch and bell Malossi Maxi Delta System 5219415 Malossi code: 5219415 Clutch and bell Malossi Maxi Delta System with bell diameter 134 mm.

Reference: 190.0052

Brand: POLINI

Polini exhaust for Kymco Downtown 300 09/14

Polini muffler for Kymco Downtown 300 09/14. Polini Code: 190.0052 Approved for: KAWASAKI J300 - C4 var.00 ver.00 / 10 KYMCO DOWNTOWN 300 - V2 var.00 ver.00 / 20 European homologation norm 97/24 / EC chap. 9 (referred to noise and power control) Catalyst 197.0022

Reference: A4464

Brand: Alfano

Alfano adapters for 40/30 / 25mm kart axle A4464

Alfano adapters for 40/30 / 25mm kart axle. Alfano Code: A4464. Adapters for 40/30 / 25mm axis with magnetic ring A4461 / A4462

Reference: 6215044BR

Brand: Malossi

Malossi MHR brake pads 6215044BR

Malossi MHR brake pads Malossi code: 6215044BR Malossi brake pads for BAOTIAN ECO BIKE 50 4T front. Malossi brake pads for ITALJET BAZOOKA 50 2T front. Malossi brake pads for ITALJET PISTA 2 50 2T front. Malossi brake pads for ITALJET SCOOP 50 2T front. Malossi brake pads for MALAGUTI DVD 50 4T front. Malossi brake pads for MBK BOOSTER 100 2T front....

Reference: 01.OT.0006.L

Brand: Ohvale

Ohvale Sprocket drive 17T 01.OT.0006.L

Ohvale Sprocket drive 17T Code: 01.OT.0006.L

Reference: EK520SRO6112

Brand: EK (Enuma Chain)

520 pitch motorcycle chain model EK520SRO6112

520 pitch motorcycle chain model EK520SRO6112. Chain EK520SRO6112 Series SRO6 Formed by 112 links with 520 pitch suitable for motorcycles with maximum displacement of: 650 cc combined with MLJ joint (Joint to be riveted).

Reference: 204.0809/D

Brand: POLINI

Polini piston diameter 61 mm selection D 204.0809/D

Polini piston diameter 61 mm selection D. Polini code: 204.0809 / D Polini piston for: Honda, Honda @ 150, Honda Nes 150, Honda Dylan 150, Honda Pantheon 150 Inject, Honda SH 150, Honda PS 150i, Honda S Wing 150, Polini, Keeway, Keeway Outlook 150

Reference: 4519027

Brand: Malossi

Malossi Sport windshield for Piaggio Beverly HPe 4519027

Malossi Sport windshield for Piaggio Beverly HPe 4519027 Malossi code: 4519027. Dark smoke colored screen. Length 41 cm. Height 25 cm. Thickness 0.3 cm.

Reference: 6119843

Brand: Malossi

Malossi Power Transmission final drive belt 6119843

Malossi Power Transmission final drive belt Malossi code: 6119843 Timing belt with carbon insert with specific tooth profile, width 25 mm – length 1320 mm. Malossi belt for YAMAHA T MAX 530 ie 4T LC euro 4 2017 (J415E). Malossi belt for YAMAHA T MAX 560 ie 4T LC euro 5 2020-2021 (J420E). Malossi belt for YAMAHA T MAX 560 ie 4T LC euro 5 2022. Malossi belt...

Reference: 25 6346B

Brand: Malossi

Malossi 25 6346B compensation chamber bottom

Malossi 25 6346B compensation chamber bottom Malossi code: 25 6346B Malossi 25 6346B compensation chamber bottom.

Reference: 143.270.013

Brand: POLINI

Minimoto intake manifold d.21 racing rubber steel

21 mm diameter rubber intake manifold for minimoto. The steel manifold is suitable for all minimoto with Italian engine, such as iame, cs, ghr, Polini, bzm, zocchi and others. Manifold compatible with PHBG 15 18 19 21 carburetor. Collector measures: Holes for fixing: 5.5 mm Distance between holes: 34x43 mm Carburetor inlet hole: 21-23 mm Code: 143.270.013

Reference: M40-CS

Brand: CS Racing

Cs engine 40cc air complete

Cs air complete 40cc Factory engine, the kit includes: -Factory engine block, complete with cnc racing shaft, clutch cover and cnc ignition, complete hammer clutch, air black head -Dedicated racing exhaust depending on the flange selected -Official Team silencer -15 CS carburettor with dedicated filter PRODUCT ASSEMBLED TO ORDER: DELIVERY FROM 15 DAYS

Reference: 350545

Brand: T4TUNE

X LIMIT DT 50 tank plugs

X LIMIT DT 50 tank plugs