Xmotorstore Payments
Polini clutch for race Vespa px 125 150 200e with z22 straight teeth pinion.
Polini code: 230.0532
Compatible with:
VESPA: 125 2T PX - 125 2T T5 - 125 2T TS - 125/150 2T COSA - 150 2T PX - 150 2T SPRINT VELOCE - 200 2T COSA - 200 2T PE, PX.
The Polini HT For Race clutch represents the pinnacle of technology for the Vespa PX or PE.
Attention: CHECK THE TEETH INSTALLED IN THE ENGINE.
Attention: CHECK THAT THE ORIGINAL THICKNESS OF THE MIXER IS 3.7 mm.
Polini clutch for race Vespa px 125 150 200e with z22 straight teeth pinion.
Polini code: 230.0532
Compatible with:
VESPA: 125 2T PX - 125 2T T5 - 125 2T TS - 125/150 2T COSA - 150 2T PX - 150 2T SPRINT VELOCE - 200 2T COSA - 200 2T PE, PX.
The Polini HT For Race clutch represents the pinnacle of technology for the Vespa PX or PE.
Attention: CHECK THE TEETH INSTALLED IN THE ENGINE.
Attention: CHECK THAT THE ORIGINAL THICKNESS OF THE MIXER IS 3.7 mm.
The Polini HT For Race clutch represents the pinnacle of technology for the Vespa PX or PE.
Thanks to its innovative reversed operation layout, the part connected to the crankshaft is no longer the external bell, but the internal hub.
The main features are:
Pressure plate on axial bearing.
Aluminium bell.
Coat machined from solid with oil collection channel.
The aluminium discs with increased surface area of 8 teeth maximise the efficiency of the transmission and guarantee greater transmitted power. The Polini HT clutch gives the possibility to adjust the clutch spring load and choose the optimal teeth of the primary gear to adapt the ratios.
With the wide choice of spare parts in the catalogue it is possible to modify the Polini HT For Race clutch by easily replacing the primary gear.
The gear engagement is precise and fluid for an effortless gear change.
Reference: 01.SZ.0107.L
Brand: Ohvale
Ohvale 110 4S Valve Cover Code: 01.SZ.0107.L
Reference: 001002R006A0
Brand: DM
Pair of flywheel side footpeg support spacers. The pedal spacers are used to maintain the correct distance between the pedal support Dm and the starter cover.
Reference: 203.0137
Brand: POLINI
Piaggio Nrg 50cc 2t air filter. Polini Code: 203.0137
Reference: 0614915E
Brand: Malossi
2 Malossi intake gaskets thickness 0.5 mm Malossi code: 0614915E
Reference: 204.0540
Brand: POLINI
Polini piston diameter 47 mm for racing kit. Polini Code: 204.0540
Reference: 3721.82.40.06-0
Brand: Domino
Pair of Domino style 120mm grips open 3721.82.40.06-0 Pair of grips in thermoplastic rubber with multi-pyramidal finish. Material: Thermoplastic rubber Black colour Length: 120 mm End: Open Handlebar / Gas tube diameter: 22/26 mm Flange diameter: 47 mm Handle diameter Knob mounted: 32 mm
Reference: 311.0108
Brand: POLINI
Polini fitting 14X1.25. Polini Code: 311.0108
Reference: 3118591
Brand: Malossi
Malossi cylinder kit diameter 68.5 in aluminum CVF2 with pin diameter 16 for Vespa Cosa - PX E 2T 200 cc Malossi code: 3118591 Malossi cylinder kit for Vespa Cosa 200 2T. Malossi cylinder kit for Vespa PX E 200 2T.
Reference: 01.SZ.1003.L
Brand: Ohvale
Ohvale Stator assy magnetoCode: 01.SZ.1003.L
Reference: 928.465.004
Brand: POLINI
Polini Thor engine airbox intake duct. Conduit available in variants: 16-17-18-19-22mm
Reference: 6118398B
Brand: Malossi
Malossi fixed half-pulley for MULTIVAR 2000 variator Malossi code: 6118398B
Reference: 6116830
Brand: Malossi
Malossi X K belt for variator 13x6.5x974 mm angle 30 Malossi code: 6116830 Malossi belt for PIAGGIO CIAO 50 2T. Malossi belt for PIAGGIO CIAO PX 50 2T.
Reference: A1210-12i
Brand: Alfano
Internal tire pressure and temperature sensor for ALFANO 7 10 and 12 inches (MOTO OVHALE). Alfano code: A1210-12i Sensor for 10 to 12 inch rims for OHVALE motorcycles. These new wireless sensors transfer the pressure and temperature measured inside your tires to your ALFANO 7, every second. Pressure accuracy: 0.02 bar. Temperature accuracy: 1 degree...
Reference: 3219637b
Brand: Malossi
Malossi exhaust manifold for RX Black muffler Malossi code: 3219637b Manifold and bracket in stainless steel alloy.
Reference: Sella-Dm-stick
Brand: XRACING
DM Minibike Seat Sticker. Sticker for DM Minibike seat, also compatible with other minibikes. The DM sticker seat is printed on an amphibole substrate with a special lamination that prevents wear. The glossy material helps the suit slide over the seat, allowing for a smoother ride and quicker movement when changing direction.
Polini clutch for race Vespa px 125 150 200e with z22 straight teeth pinion.
Polini code: 230.0532
Compatible with:
VESPA: 125 2T PX - 125 2T T5 - 125 2T TS - 125/150 2T COSA - 150 2T PX - 150 2T SPRINT VELOCE - 200 2T COSA - 200 2T PE, PX.
The Polini HT For Race clutch represents the pinnacle of technology for the Vespa PX or PE.
Attention: CHECK THE TEETH INSTALLED IN THE ENGINE.
Attention: CHECK THAT THE ORIGINAL THICKNESS OF THE MIXER IS 3.7 mm.
