- Reduced price
- New

Xmotorstore Payments
Malossi MHR cylinder kit diameter 57.5 in aluminum with pin diameter 15
Malossi code: 3115829
Malossi cylinder kit for PIAGGIO APE 50 2T 1989. To install the cylinder kit it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar. Use with 51 mm stroke CRANKSHAFTS art. 5316517 - 5316528 - 5316594 and Vespa 125 cc AIR CAP.
Malossi cylinder kit for PIAGGIO APE FL 50 2T 1989-1990. To install the cylinder kit it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar. Use with 51 mm stroke CRANKSHAFTS art. 5316517 - 5316528 - 5316594 and AIR CAP Vespa 125 cc.
Malossi thermal unit for PIAGGIO APE FL2 50 2T 1990-1995. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar. Use with 51 mm stroke CRANKSHAFTS art. 5316517 - 5316528 - 5316594 and AIR CAP Vespa 125 cc.
Malossi thermal unit for PIAGGIO APE FL3 50 2T 1996-1999. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar. Use with 51 mm stroke CRANKSHAFTS art. 5316517 - 5316528 - 5316594 and AIR HEADPHONES Vespa 125 cc.
Malossi thermal unit for VESPA ET3 Primavera 125 2T. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar.
Malossi thermal unit for VESPA ETS 125 2T. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar.
Malossi thermal unit for VESPA PK 125 2T. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar.
Malossi thermal unit for VESPA PK FL 125 2T. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar.
Malossi thermal unit for VESPA PK XL 125 2T. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar.
Malossi thermal unit for VESPA Primavera 125 2T. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar.
Malossi MHR cylinder kit diameter 57.5 in aluminum with pin diameter 15
Malossi code: 3115829
Malossi cylinder kit for PIAGGIO APE 50 2T 1989. To install the cylinder kit it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar. Use with 51 mm stroke CRANKSHAFTS art. 5316517 - 5316528 - 5316594 and Vespa 125 cc AIR CAP.
Malossi cylinder kit for PIAGGIO APE FL 50 2T 1989-1990. To install the cylinder kit it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar. Use with 51 mm stroke CRANKSHAFTS art. 5316517 - 5316528 - 5316594 and AIR CAP Vespa 125 cc.
Malossi thermal unit for PIAGGIO APE FL2 50 2T 1990-1995. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar. Use with 51 mm stroke CRANKSHAFTS art. 5316517 - 5316528 - 5316594 and AIR CAP Vespa 125 cc.
Malossi thermal unit for PIAGGIO APE FL3 50 2T 1996-1999. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar. Use with 51 mm stroke CRANKSHAFTS art. 5316517 - 5316528 - 5316594 and AIR HEADPHONES Vespa 125 cc.
Malossi thermal unit for VESPA ET3 Primavera 125 2T. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar.
Malossi thermal unit for VESPA ETS 125 2T. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar.
Malossi thermal unit for VESPA PK 125 2T. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar.
Malossi thermal unit for VESPA PK FL 125 2T. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar.
Malossi thermal unit for VESPA PK XL 125 2T. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar.
Malossi thermal unit for VESPA Primavera 125 2T. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar.
Reference: 211.0277
Brand: POLINI
Piaggio Zip 50cc 2t 40.2 mm evolution head. Polini Code: 211.0277
Reference: 206.0038
Brand: POLINI
Polini segment diameter 55.8x1.5 mm 206.0038
Reference: 01.SD.0604.L
Brand: Ohvale
Ohvale Bolt hexagon flange M6x22Code: 01.SD.0604.L
Reference: 204.0250
Brand: POLINI
Piaggio Ciao piston 43mm. Polini Code: 204.0250
Reference: 204.0048
Brand: POLINI
Vespa 50cc piston 55.8 mm. Polini Code: 204.0048
Reference: WPA421
Brand: CAPIT
Cable with 12V car cigarette lighter (diameter 21mm) for direct feeding Warmme Capit heated clothing excluding the use of batteries. If used with heated gloves, the splitter cable code WPA610 must be combined.
Reference: 088
Brand: DM
Plastic minibike tank cap, compatible with: Dm, Stamas, Blata. The minibike cap is knurled, to allow an optimal grip when opening and closing.
Reference: 5517509
Brand: Malossi
Malossi flywheel and stator assembly 5517509 Code: 5517509 Malossi flywheel and stator assembly for Vespower ignition. Flywheel dimensions diameter 125X42 mm
Reference: 01.IF.0075.L
Brand: Ohvale
Ohvale rear caliper screw kit for Gp-0 Gp-2. Code: 01.IF.0075.L
Reference: zoc100.0504
Brand: Zocchi
Minimoto clutch shim kit. Kit of washers for calibrating the minibike clutch weights. These "shims" are used to create the correct clearance between the bell and the minibike clutch. As a general rule, the total difference in diameter between the bell and the clutch must be 1 cm. (always check based on brand and model).
Reference: 248.077
Brand: POLINI
Polini variator belt for Yamaha X Max 250 Aramid Code: 248.077 Application: Yamaha, Yamaha Versity 300, Yamaha X City 250, Yamaha X Max 250 / 250i, Mbk, Mbk Skycruiser 250, Mbk Evolis 250 4T ie
Reference: 173.0001
Brand: POLINI
Yamaha T-max 500 injection pressure regulator. YAMAHA: T MAX 500 Injection - T MAX 500 Injection 2008 POLINI PRESSURE REGULATOR KIT FOR YAMAHA TMAX: HYPER PRESSURE Polini has put on the market a pressure regulator for Yamaha TMax capable of increasing the pressure of the original fuel injection system from 2.5 atmospheres (original) to 3.5 atmospheres It...
Reference: 133.1011.1
Brand: POLINI
Polini special edition kit for Minarelli AM6 and Derbi engines 133.1011.1 Polini Special Edition kit for Minarelli AM6 with 80cc cylinder kit, reinforced crankshaft and high-performance overhaul kit.
Reference: 343.0002
Brand: POLINI
Or cover gas valve carburetor Cp Polini. Polini Code: 343.0002
Reference: 209.0476
Brand: POLINI
Vespa 125 cc et3 58mm gaskets 209.0476
Reference: 61 2765B
Brand: Malossi
Malossi fixed half-pulley d.106 for MBK Malossi code: 61 2765B
Malossi MHR cylinder kit diameter 57.5 in aluminum with pin diameter 15
Malossi code: 3115829
Malossi cylinder kit for PIAGGIO APE 50 2T 1989. To install the cylinder kit it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar. Use with 51 mm stroke CRANKSHAFTS art. 5316517 - 5316528 - 5316594 and Vespa 125 cc AIR CAP.
Malossi cylinder kit for PIAGGIO APE FL 50 2T 1989-1990. To install the cylinder kit it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar. Use with 51 mm stroke CRANKSHAFTS art. 5316517 - 5316528 - 5316594 and AIR CAP Vespa 125 cc.
Malossi thermal unit for PIAGGIO APE FL2 50 2T 1990-1995. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar. Use with 51 mm stroke CRANKSHAFTS art. 5316517 - 5316528 - 5316594 and AIR CAP Vespa 125 cc.
Malossi thermal unit for PIAGGIO APE FL3 50 2T 1996-1999. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar. Use with 51 mm stroke CRANKSHAFTS art. 5316517 - 5316528 - 5316594 and AIR HEADPHONES Vespa 125 cc.
Malossi thermal unit for VESPA ET3 Primavera 125 2T. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar.
Malossi thermal unit for VESPA ETS 125 2T. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar.
Malossi thermal unit for VESPA PK 125 2T. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar.
Malossi thermal unit for VESPA PK FL 125 2T. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar.
Malossi thermal unit for VESPA PK XL 125 2T. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar.
Malossi thermal unit for VESPA Primavera 125 2T. To install the thermal unit, it is necessary to modify the engine crankcase and combine the VESPower Malossi ignition or similar.