Xmotorstore Payments
There are 8153 products.
Reference: A272A
Brand: Alfano
A272A exhaust connection to fix the Alfano A2151 sensor
Reference: A2151
Brand: Alfano
Exhaust K sensor for thermocouple A2151. 40cm "K" exhaust sensor "Professional quality, red label". This K thermocouple technology sensor must be installed on the exhaust pipe. Read the explanation on installing and using this sensor, this document is located under the heading SUPPORT Note: This sensor must be used with an A3401 extension cable or A2190 hub.
Reference: A3301
Brand: Alfano
Extension for "NTC" sensors Alfano 135 cm A3301. Extension of "NTC" technology to connect all Alfano NTC sensors.
Reference: A2104
Brand: Alfano
45 cm candle temperature sensor A2104. This normal version NTC sensor must be installed with a 14mm diameter spark plug. Caution: It is important to remove the sealing washer from the spark plug before installation. Note: This sensor must be used with an A3301 extension cable or A2190 hub.
Reference: A2103
Brand: Alfano
45 cm M5 water temperature sensor A2103. This NTC technology sensor with a 5mm metric thread can be connected to the motor head if the motor has a hole designed to install this sensor. Note: This sensor must be used with an A3301 extension cable or A2190 hub.
Reference: A2102
Brand: Alfano
Water temperature sensor with 1/8GAS 45 cm thread A2102. This NTC technology sensor with 1 / 8GAS thread can be connected to the motor head if the motor has a hole designed to install this sensor. Note: This sensor must be used with an A3301 extension cable or A2190 hub.
Reference: A2111
Brand: Alfano
185 cm "NTC" M10 water temperature sensor A2111. 185cm long version M10 "NTC" water sensor. This NTC technology sensor with a 10mm metric thread can be connected either to the motor head if the motor has a hole designed to install this sensor or this sensor can be installed on an aluminum durit adapter, ref. A261, A262, A263, A264. Note: This sensor is...
Reference: A2101
Brand: Alfano
45 cm "NTC" M10 water temperature sensor A2101. This NTC technology sensor with a 10mm metric thread can be connected either to the motor head if the motor has a hole designed to install this sensor or this sensor can be installed on an aluminum durit adapter, ref. A261, A262, A263, A264. Note: This sensor must be used with an A3301 extension cable or...
Reference: A2195
Brand: Alfano
Hub for 2 speed sensors A2195. Hub with 2 inputs for 2 speed sensors, specific for 20cm Box12. This HUB allows the simultaneous connection of two A2201 speed sensors.
Reference: A2193
Brand: Alfano
2-input hub for Alfano 6 A2193. HUB with 2 inputs: 20cm plus magnetic / infrared speed. This hub allows the simultaneous connection of an A2201 speed sensor and an A1401 / A1411 infrared sensor or a magnetic sensor. Note: this HUB is specially designed to connect to the green connector of the PROIIIevo, ALFANO6.
Reference: A2194
Brand: Alfano
2-input hub for Alfano 6 A2194. HUB with 2 inputs: speed plus magnetic 20cm. New model, this A2194 Hub replaces the old A2192 model. This HUB allows you to simultaneously connect an A2201 speed sensor (old model) or the A2203 (new model) + an A1302 magnetic sensor Note: this HUB is specially designed to connect to the green connector of the PROIIIevo,...
Reference: A440
Brand: Alfano
Alfano magnets 20 pieces D6x4mm. Alfano Code: A440 Can be used for A2201 speed sensor and A2405 Hall sensor
