Xmotorstore Payments
Malossi Force master 2.1 electronic control unit 5519542
Malossi code: 5519542
The Force Master 2.1 ECU is much easier to configure. Making products more ergonomic and simple to use has always been a Malossi objective: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication lines, a new user interface and the addition of a capacitive ignition input, Force Master 2.1 is the ideal complement for managing vehicle performance: without functional limitations, it allows you to push the engine beyond the barrier of the original rev limiter.
Technical data
-Carburetion adjustment
± 14% at min/average/max
-Rev limiter: +1000 RPM depending on the application
-Temperature range = -30°C +80°C
-Minimum operating voltage = +7V
-Maximum operating voltage = +16V
-Average current absorbed <-200mA
-Environmental protection = IP65
4 different mappings:
-curve 0: Malossi exhaust with db-killer, original cylinder, original head, original cams and original filter
-curve 1: original exhaust, Malossi cylinder, original head, original cams and original filter
-curve 2: Malossi exhaust with db-killer, Malossi cylinder, original head, original cams and original filter
-curve 3: Malossi exhaust with db-killer, Malossi cylinder, original head, original cams and Malossi filter
Malossi control unit for:
Malossi control unit for Aprilia RS4 125 ie 4T LC euro 3 attention: mount exclusively with the Malossi cylinder art. 3115326.
Malossi control unit for Aprilia RS 125 ie 4T LC euro 4 2019->2020 (M545M) attention: mount exclusively with the Malossi cylinder art. 3115326.
Malossi control unit for Aprilia RS GP Replica 125 ie 4T LC euro 4 2019->2020 attention: mount exclusively with the Malossi cylinder art. 3115326.
Malossi control unit for Aprilia RX 125 ie 4T LC euro 4 2019->2020 attention: mount exclusively with the Malossi cylinder art. 3115326.
Malossi control unit for Aprilia SX 125 ie 4T LC euro 4 2018->2020 (M545M) attention: mount exclusively with the Malossi cylinder art. 3115326.
Malossi control unit for Aprilia Tuono 125 ie 4T LC euro 4 2019->2020 attention: mount exclusively with the Malossi cylinder art. 3115326.
Malossi control unit for Derbi Senda DRD 4V R - SM 125 ie 4T LC euro 3 attention: mount exclusively with the Malossi cylinder art. 3115326.
Reference: 31 8561
Brand: Malossi
Malossi cylinder diameter 40 in cast iron Malossi code: 31 8561
Reference: 97180471B
Brand: Ducati
Original red windscreen for Ducati Monster 1200 and 1200 S, product code 97180471B. Aerodynamic design, supplied with all mounting brackets.
Reference: 01.AS.0285.L
Brand: Ohvale
Ohvale Stud PHBL24 Code: 01.AS.0285.L
Reference: 7719308B
Brand: Malossi
Malossi Maxi wing finned clutch bell 7719308B Malossi code: 7719308B. Malossi Maxi Wing finned clutch bell. Internal diameter 134 mm. Weight 993 grams. The anti-explosion thermal clutch bells are equipped with a finned reinforcement ring for the dissipation of heat which develops mainly during starts from a standstill and when the vehicle accelerates from...
Reference: Kondor110cc
Brand: Lem motor
Lem Kondor kids quad 110cc 4t. Quad for children up to 11 years, 7-inch wheels, sports exhaust with speed regulator. 4-stroke single-cylinder engine with rear Displacement 110cc Carburetor power supply Tank capacity 3.5lt unleaded petrol fuel CDI ignition Electric start Type of automatic transmission Chain transmission Motorcycle dimensions 125x74x66 seat...
Reference: 6215020BS
Brand: Malossi
Malossi MHR Synt approved brake pads Malossi code: 6215020BS Malossi brake pads for APRILIA SRV 850 ie 4T LC euro 3 (PIAGGIO M554M) Front NOT APPROVED The lack of approval does not limit their assembly Malossi brake pads for GILERA GP 800 4T LC (PIAGGIO M554M) Front APPROVED Malossi brake pads for GILERA NEXUS 500 ie 4T LC euro 2-3 Front APPROVED Malossi...
Reference: 61 9584
Brand: Malossi
X K belt Malossi strap 22.5x10x840 mm angle 30 Malossi code: 61 9584 Malossi belt for HONDA CN 250 4T LC Malossi belt for HONDA HELIX 250 4T LC Malossi belt for PIAGGIO HEXAGON 250 4T LC
Reference: 3112054
Brand: Malossi
Malossi I - TECH complete cylinder diameter 47 in aluminum with pin diameter 12 Malossi code: 3112054 Malossi cylinder for Aprilia Scarabeo Ditech 50 2T for original head. The use of spark plug 6312594 is recommended.
Reference: 3216840
Brand: Malossi
Malossi RX exhaust for MBK and Yamaha Malossi code: 3216840 Malossi exhaust for MBK TRYPTIK 125 ie 4T euro 3. Malossi exhaust for YAMAHA TRICITY 125 ie 4T LC euro 3 2016.
Reference: 01.SZ.0404.L
Brand: Ohvale
Ohvale Dish washer clutch Code: 01.SZ.0404.L
Reference: 01.CA.0052.L
Brand: Ohvale
Ohvale Lateral fairing R matt black or white Code: 01.CA.0052.L
Reference: 216.0131
Brand: POLINI
Exhaust manifold initial Vespa 125 PK-ETS-XL 216.0131
Reference: F00 006
Brand: DM
Pair of rear wheel bearings with 114 mm spacer (HYDRAULIC BRAKES)
Reference: IMA-20900-40
Brand: CS Racing
Piston pin Iame 40cc / 50cc 10x30x6 (40cc) 10x33x6 (50cc)
Reference: 3116327
Brand: Malossi
Malossi cylinder diameter 57.5 in cast iron with pin diameter 15 Malossi code: 3116327
Reference: 01.AS.0311.L
Brand: Ohvale
Ohvale Slide 50 Code: 01.AS.0311.L
Malossi Force master 2.1 electronic control unit 5519542
Malossi code: 5519542
The Force Master 2.1 ECU is much easier to configure. Making products more ergonomic and simple to use has always been a Malossi objective: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication lines, a new user interface and the addition of a capacitive ignition input, Force Master 2.1 is the ideal complement for managing vehicle performance: without functional limitations, it allows you to push the engine beyond the barrier of the original rev limiter.
Technical data
-Carburetion adjustment
± 14% at min/average/max
-Rev limiter: +1000 RPM depending on the application
-Temperature range = -30°C +80°C
-Minimum operating voltage = +7V
-Maximum operating voltage = +16V
-Average current absorbed <-200mA
-Environmental protection = IP65
4 different mappings:
-curve 0: Malossi exhaust with db-killer, original cylinder, original head, original cams and original filter
-curve 1: original exhaust, Malossi cylinder, original head, original cams and original filter
-curve 2: Malossi exhaust with db-killer, Malossi cylinder, original head, original cams and original filter
-curve 3: Malossi exhaust with db-killer, Malossi cylinder, original head, original cams and Malossi filter
