Xmotorstore Payments
Malossi Gp mhr 3212222 exhaust for Aprilia
Code: 3212222
The racing muffler born on the track for the track.
It is one of the essential components destined for the MALOSSI trophy, specially designed to give the engine a good increase in power at medium and high revs.
Malossi trophies are raced all over the world according to precise formulas, which foresee by regulation pairings of different special Malossi corsa products for each category, in order to achieve optimal and homogeneous results among the various competitors with the use of the most advanced technologies.
With the GP mhr mufflers, Malossi expands the range of trophy mufflers, which express the maximum performance in the sector.
Another Malossi initiative to give the opportunity to all young people who intend to practice a sporting activity in the world of two wheels to become the riders of the future.
TECHNICAL FEATURES
Expansion MUFFLER in special steel sheet (thickness 8/10 mm), obtained with T.I.G. robotic welding procedures. and M.I.G. and handcrafted oxy-acetylene welding. Transparent varnish.
SILENCER in aluminum, anodized Nitro blue.
Malossi exhaust for:
3212222 EXHAUST GP MHR APRILIA TUONO 50 2T LC (MINARELLI AM 6) - APRILIA RS 50 2T LC (MINARELLI AM 3 > 6)
3212222 MALOSSI EXHAUST GP MHR APRILIA RS 50 2T LC (MINARELLI AM 3 > 6)
3212222 MALOSSI EXHAUST GP MHR APRILIA TUONO 50 2T LC (MINARELLI AM 6)
Reference: 0619963
Brand: Malossi
2 Malossi O-rings diameter 57 Malossi code: 0619963
Reference: 3213154
Brand: Malossi
Malossi silencer diameter 60x21 mm for GP and SUPERMOTO MHR exhausts Malossi code: 3213154
Reference: 6113501
Brand: Malossi
Malossi X K belt strap for scooter 18x9x743 mm angle 30 Malossi code: 6113501 Malossi belt for GARELLI FLEXI' 50 4T euro 2 (1P139 QMB). Malossi belt for GARELLI TIESSE FOUR 50 4T euro 2 (1P39QMB). Malossi belt for HUPPER MONTECARLO 30 50 4T (139QMB). Malossi belt for KYMCO AGILITY R10/12 - RS 50 4T euro 2 (KL10B). Malossi belt for KYMCO AGILITY R12 50 ie...
Reference: 6215065BR
Brand: Malossi
Malossi MHR brake pads Malossi code: 6215065BR Malossi brake pads for HM CR ME-F X 125 4T LC (WR125-EØ12). Malossi brake pads for KYMCO CX 50 2T for vehicles produced since 1994. Malossi brake pads for KYMCO K 12 50 2T for vehicles produced since 1995. Malossi brake pads for KYMCO SNIPER 50 2T for vehicles produced since 1993. Malossi brake pads for KYMCO...
Reference: 950.830.039
Brand: POLINI
Hi-Speed e-bike Yamaha Pw-Pwx-X2-Sync drive pro, code 950.830.039 Hi-Speed e-bike for: Yamaha Pw-Sync drive e-bike (2015-2016), Yamaha Pwx-Sync drive pro e-bike (2017), Yamaha Pwx-x2 e-bike (2020)
Reference: 204.0906/C
Brand: POLINI
Polini XP4 piston diameter 52 mm selection C. Polini code 204.0906 / C Polini piston for: Polini, Polini XP4T 110 2 valves.
Reference: SPEED EVO JR 0001 MULTICOLOR
Brand: STYLMARTIN
Stylmartin Speed JR PRO 2025 minimoto boots for kids. Leather construction, lightweight and breathable. Racing-ready comfort. Sizes 29–39.
Reference: 174.0087
Brand: POLINI
Original Polini brake pads 36.4x75x9.7 mm Code: 174.0087 Application: Honda, Honda Lead 50, Kymco, Kymco Heroism 50, Kymco K12 50, Kymco Kb 50, Kymco Sniper 50 DD, Kymco super 9 50, Kymco cobra 50, Kymco yup 50 2T air, Peugeot, Peugeot Sv 50 geo, Hm , Hm cre 125 2t / 50
Reference: 01.SZ.0231.L
Brand: Ohvale
Pin 8×12×6.3 Ohvale 110 4SCode: 01.SZ.0231.L
Reference: 204.0390
Brand: POLINI
Piaggio Ciao piston 46mm. Codice Polini: 204.0390
Brand: CAPIT
European 12 Volt battery charger, replacement for Capit Warmme heated gloves and socks. Orderable with EU plug and USA / JPN. NOTES: not usable on gloves with 2 batteries (season 2015/2016)
Reference: 01.SZ.0404.L
Brand: Ohvale
Ohvale Dish washer clutch Code: 01.SZ.0404.L
Reference: 5515734
Brand: Malossi
Lambda Emulator TC UNIT O2 Malossi controller 5515734 for Honda Sh Code: 5515734 To further optimize carburetion and transient performance, the use of the O2 controller is recommended. In the latest generation motorbikes, the control unit, thanks to the lambda probe, is able to correct the quantity of fuel that must be injected so that the carburetion is...
Reference: 3217777
Brand: Malossi
Malossi RX Black exhaust for Yamaha N Max Malossi code: 3217777 Malossi exhaust for Yamaha N MAX 155 ie 4T LC euro 4 2017.
Reference: 166.0048
Brand: POLINI
Polini cylinder kit for Yamaha Dt 80 diameter 55 mm. Polini Code: 166.0048 Yamaha thermal group kit for: Yamaha, Yamaha Dt 80 Aluminum cylinder
Reference: 6113502
Brand: Malossi
Malossi X K belt 22x10x849 mm angle 30 Malossi code: 6113502 Malossi belt for ITALJET DRAGSTER 125 ie 4T LC euro 5 2021-> (JC1P58MI-3) Malossi belt for ITALJET DRAGSTER 200 4T LC euro 5 2021-> (JC1P63ML-4B) Malossi belt for SUZUKI BURGMAN K 7 125 ie 4T LC euro 3 (F490)
Reference: 5518182
Brand: Malossi
Malossi Force Master 2 code 5518182 electronic control unit The Force Master ECU allows you to vary the injection to adapt perfectly to the Malossi and original 4 stroke cylinders. Carburation adjustment ± 20% at min/average/max Rev limiter: Original 9.300 - Malossi 9.300 (*) 4 different mappings : curve 0 : Malossi exhaust with db-killer, original...
Reference: 075103
Brand: C4
Skf bearing kit and Piaggio air cylinder gaskets
Malossi Gp mhr 3212222 exhaust for Aprilia
Code: 3212222
The racing muffler born on the track for the track.
It is one of the essential components destined for the MALOSSI trophy, specially designed to give the engine a good increase in power at medium and high revs.
Malossi trophies are raced all over the world according to precise formulas, which foresee by regulation pairings of different special Malossi corsa products for each category, in order to achieve optimal and homogeneous results among the various competitors with the use of the most advanced technologies.
With the GP mhr mufflers, Malossi expands the range of trophy mufflers, which express the maximum performance in the sector.
Another Malossi initiative to give the opportunity to all young people who intend to practice a sporting activity in the world of two wheels to become the riders of the future.
TECHNICAL FEATURES
Expansion MUFFLER in special steel sheet (thickness 8/10 mm), obtained with T.I.G. robotic welding procedures. and M.I.G. and handcrafted oxy-acetylene welding. Transparent varnish.
SILENCER in aluminum, anodized Nitro blue.
