Xmotorstore Payments
Piston diameter 36 Meteor for Cs Iame 40cc
ROUNDED HEAD PISTON COMPLETE WITH RING AND PIN
Technical features:
Aluminum with a high percentage of silicon to ensure high resistance to heat
Indeformability to temperature variations and corrosion on the piston crown.
Graphite coating that guarantees a low coefficient of friction and running-in.
Reinforced rounded crown to resist the stresses imposed for competitions while being light to reduce the forces of inertia.
Pistons come complete with pin, ring and retainers.
A minimum tolerance of 5.6 cents is recommended.
Piston diameter 36 Meteor for Cs Iame 40cc
ROUNDED HEAD PISTON COMPLETE WITH RING AND PIN
Technical features:
Aluminum with a high percentage of silicon to ensure high resistance to heat
Indeformability to temperature variations and corrosion on the piston crown.
Graphite coating that guarantees a low coefficient of friction and running-in.
Reinforced rounded crown to resist the stresses imposed for competitions while being light to reduce the forces of inertia.
Pistons come complete with pin, ring and retainers.
A minimum tolerance of 5.6 cents is recommended.
Reference: 143.801.047
Brand: POLINI
Polini 910 s minimoto fairing right plus left, compatible with all polini 910. Polini Code: 143.801.047
Reference: 6215019BS
Brand: Malossi
Malossi MHR Synt approved brake pads Malossi code: 6215019BS Malossi brake pads for APRILIA ATLANTIC - Arrecife 250 4T LC (PIAGGIO M237M) Rear APPROVED Malossi brake pads for APRILIA ATLANTIC S 300 ie 4T LC euro 3 (PIAGGIO) Rear NOT APPROVED The lack of approval does not limit their assembly Malossi brake pads for APRILIA ATLANTIC SPRINT - Arrecife 400 4T...
Reference: 2014297B
Brand: Malossi
Malossi gasket and clamp kit for MAXI WILD LION exhaust system. Code 2014297B. Genuine replacement for proper sealing and secure installation.
Reference: 61 7314
Brand: Malossi
X SPECIAL belt Malossi belt for Piaggio Boss Si 50 cc variator 13x6.5x1143 mm angle 34 degrees Malossi code: 61 7314 Malossi belt for Piaggio Boss 50 2T. Malossi belt for Piaggio Boxer 50 2T. Malossi belt for Piaggio Si 50 2T.
Reference: 6716260b
Brand: Malossi
Malossi Cruise for Vespa 6716260b Malossi Code: 6716260b The new cruise dedicated to the classic “small frame” Vespas is a small masterpiece of mechanics that contains the maximum technology to guarantee a piece with very high mechanical characteristics, capable of withstanding stresses far greater than those to which the original component is often...
Reference: Iron Wp Bronze
Brand: STYLMARTIN
Stylmartin Iron Wp Bronze Iron WP, the unisex sneaker, in water-repellent full-grain leather and waterproof and breathable lining; perfect for all seasons and also suitable for women thanks to the woman fit fit.
Reference: 3218452b
Brand: Malossi
Malossi GP MHR REPLICA 4T naked exhaust Malossi code: 3218452b
Reference: 241.697
Brand: POLINI
Polini Variator for Hi speed Honda 125 Pcx 9 rollers Code: 241.697 Variator supplied with a series of rollers 20x12 gr. 9.2 Application: Honda, Honda Pcx 125 ie / 125 ie Euro 3/150/150 Euro 3, Honda Sh 125i Mode ie 4T H2O
Reference: 01.SB.1404.L
Brand: Ohvale
Ohvale Relay 110ZB Code: 01.SB.1404.L
Reference: 2215529
Brand: Malossi
Malossi pipe kit (front / rear) for MHR (aeronautical) brake Yamaha T Max 2215529 Malossi code: 2215529 Malossi pipe kit (front / rear) for MHR (aeronautical) brake Yamaha T Max. Malossi brake pipe for YAMAHA T MAX 530 ie 4T LC 2012-2014 (J409E) only for vehicles without ABS. Malossi brake pipe for YAMAHA T MAX 530 ie 4T LC 2015-2016 (J409E) only for...
Reference: 104086
Brand: Motul
Motul 7100 4T 5W-40 oil 1 Liter 100% synthetic lubricant for 4-stroke engines - Ester Core technology - Meets the specifications of the motorcycle manufacturers, in particular BMW, KTM and MV Agusta who recommend the SAE 5W40 grade. High cut resistance with motor and gearbox protection. Easy gear shifting. Meets JASO MA2 specification to optimize wet...
Reference: 246.032
Brand: POLINI
Twin cooling of the transmission group with the “Air Speed Drive” developed by Polini. By using the AIR SPEED DRIVE you improve decisively the aeration inside the crankcase and consequently it increases both the engine performance for long distances covered and the belt life. The Polini SPEED DRIVE and CERAMIC SPEED DRIVE for Piaggio and Yamaha include...
Reference: GHR 501.003
Brand: GHR
40cc air Ghr engine (without carburettor, filter and muffler). 40cc air Ghr engine, the engine does not include the carburetor and exhaust. Ghr motor available with 10/12/14/15 flange or with flange. At the time of purchase, insert the desired flange in the notes. GHR minimoto engine weight: 5180 grams
Reference: 170.0305
Brand: POLINI
Polini horizontal black variator cover for Yamaha / Minarelli, code 170.0305 Variator cover for: Aprilia, Aprilia Area 51, Aprilia Gulliver 50, Aprilia Rally 50, Aprilia Sr 50, Benelli, Benelli 491 50, Benelli K2 50, Benelli Naked 50, Benelli Pepe 50, Beta, Beta Ark 50, Beta Quadra 50, Beta Eikon 50, Beta Tempo 50, Malaguti, Malaguti Centro 50, Malaguti...
Reference: EK520MVXZ2112
Brand: EK (Enuma Chain)
EK 520MVXZ2 motorcycle chain 112 links qx-ring. EK520MVXZ2112 chain MVXZ2 series formed by 112 links with 520 pitch suitable for motorcycles with maximum displacement of: 1000cc, MLJ joint (Joint to be riveted). Standard coloring
Reference: 204.0201/D
Brand: POLINI
Polini piston diameter 46 mm selection D with chromed segment. Polini code: 204.0201/D Polini piston for: Honda, Honda Wallaroo 50, Peugeot, Peugeot 103, Peugeot 104, Peugeot 105, Peugeot Fox 50, Peugeot GL 10, Peugeot 103 SPX 50, Polini
Piston diameter 36 Meteor for Cs Iame 40cc
ROUNDED HEAD PISTON COMPLETE WITH RING AND PIN
Technical features:
Aluminum with a high percentage of silicon to ensure high resistance to heat
Indeformability to temperature variations and corrosion on the piston crown.
Graphite coating that guarantees a low coefficient of friction and running-in.
Reinforced rounded crown to resist the stresses imposed for competitions while being light to reduce the forces of inertia.
Pistons come complete with pin, ring and retainers.
A minimum tolerance of 5.6 cents is recommended.
