Xmotorstore Payments
Polini cylinder for Vespa 200 Pe Px. Polini code: 140.0232 .
The Polini cylinder with a diameter of 68.5 and a stroke of 60mm. it allows to increase the displacement to 221cc, made of aluminum it allows to better dispose of the heat by lowering the operating temperature in the most demanding uses.
The Polini cylinder for Vespa has been revisited by replacing the muffler fastening, obtained from fusion, with a one-piece steel manifold fixed to the cylinder with 4 screws.
The piston is completely redesigned with large passages on the skirt, to facilitate the feeding of the transfer ducts.
The shape of the sky is optimized to increase resistance and cooling.
The head with increased finning on the entire surface allows for maximum heat dispersion. The dome is entirely machined and coupled with a copper gasket to improve performance and optimize cooling; the dowel pins with the cylinder allow for a constant squish area over the entire diameter of the cylinder.
The Polini aluminum cylinder kit for Vespa code 140.0232 increases performance by 6%, compared to the same engine speed compared to the previous model code 140.0084.
Polini aluminum cylinder kit for Vespa: code 140.0232 for VESPA 200 2T COSA – 200 2T PE, PX.
Polini cylinder for Vespa 200 Pe Px. Polini code: 140.0232 .
The Polini cylinder with a diameter of 68.5 and a stroke of 60mm. it allows to increase the displacement to 221cc, made of aluminum it allows to better dispose of the heat by lowering the operating temperature in the most demanding uses.
The Polini cylinder for Vespa has been revisited by replacing the muffler fastening, obtained from fusion, with a one-piece steel manifold fixed to the cylinder with 4 screws.
The piston is completely redesigned with large passages on the skirt, to facilitate the feeding of the transfer ducts.
The shape of the sky is optimized to increase resistance and cooling.
The head with increased finning on the entire surface allows for maximum heat dispersion. The dome is entirely machined and coupled with a copper gasket to improve performance and optimize cooling; the dowel pins with the cylinder allow for a constant squish area over the entire diameter of the cylinder.
The Polini aluminum cylinder kit for Vespa code 140.0232 increases performance by 6%, compared to the same engine speed compared to the previous model code 140.0084.
Polini aluminum cylinder kit for Vespa: code 140.0232 for VESPA 200 2T COSA – 200 2T PE, PX.
Reference: 210.0065
Brand: POLINI
Polini crankshaft for Vespa 200 anticipated stroke 60 mm Polini crankshaft for: Vespa, Vespa 200 2T PE, Vespa 200 2T PX, Vespa 200 2T Cosa
Reference: 246.053
Brand: POLINI
Guides for Polini evolution variator roller guide plate 246.053
Reference: EK428SHDR132
Brand: EK (Enuma Chain)
Motorbike chain step 428 model EK428SHDR132. EK chain EK428SHDR132 SHDR Series Formed by 132 links with 428 pitch suitable for motorcycles with maximum displacement of: 200 cc combined with SPJ joint (Clip joint).
Reference: 4512183
Brand: Malossi
Malossi air conveyor, complete with brackets 4512183 Malossi code: 4512183 Air conveyor, complete with brackets.
Reference: 242.236
Brand: POLINI
Polini rollers 28X20 pieces 8. Available: 242.231 ROLLS 28X20 GR.24.5 242.233 ROLLS 28X20 GR.29,0 242.235 ROLLS 28X20 GR.15,5 242.236 ROLLS 28X20 GR.17,0 242.237 ROLLS 28X20 GR.20,0 242.238 ROLLS 28X20 GR.22.0 242.239 ROLLS 28X20 GR.26,0
Reference: 6015
Brand: STAMAS
Screw kit for front fairing and Stamas tail.
Reference: Lem-front-12-wheel
Brand: Lem motor
12 inch minicross Lem front wheel. Rim for 12-inch minicross, complete with rubber size 2.50-12 42j. The minicross rim is compatible both to replace the front wheel for the A12 model, and to transform the Lem A10 into A12.
Reference: 31 8185
Brand: Malossi
Malossi MHR Cylinder Diameter 47.6 in Aluminum H2O Malossi Code: 31 8185
Reference: 6714844
Brand: Malossi
Malossi HTQ secondary gears z 22 / 45 6714844 Malossi code: 6714844. Straight tooth transmission gears in special steel with recalculated ratio. They completely eliminate any axial thrust, reducing stress on the bearings. Made with very high precision machines, casehardened, tempered and ground in order to provide high characteristics of silence and...
Reference: 1318195b
Brand: Malossi
Malossi sleeve with diameter 31.5 for PHBG 21 BD carburetor (21.4 mm) Malossi code: 1318195b
Reference: 0721.03
Brand: Domino
Domino 0721.03 throttle control without grips Technopolymer gas control. Support material: Technopolymer Black colour Max travel: 74 mm Rapidity: 3.6 ° / mm Cable Type: Mono Cable
Reference: 51 7160
Brand: Malossi
Malossi Multivar 51 7160 Variator for Peugeot Code: 51 7160 Malossi Multivar variator for mopeds and Peugeot. Multivar is very simple to apply and easy to operate. It is studied in every detail and tested on each specific application. With such a sophisticated variator, your scooter will acquire snap, shift linearity and greater mechanical "tranquility"...
Reference: 248.114
Brand: POLINI
Polini variator belt for Kymco Downtown 300 Aramid Code: 248.114 Application: Kymco, Kymco People 300 S i / 300 GTi, Kymco Downtown 300i 4V / 350i, Kymco K-XCT 300 i 4V, Kawasaki, Kawasaki J 300 ie LC euro 3/300 ie LC Euro 4
Reference: 22 9548
Brand: Malossi
Malossi MHR pipe for front brake (aeronautical) Piaggio Zip 22 9548 Malossi code: 22 9548 Malossi MHR pipe for front brake (aeronautical) length 1.11mt 22 9548 Malossi brake pipe for PIAGGIO ZIP SP 50 2T LC up to 2000. Malossi brake pipe for PIAGGIO ZIP SP 50 2T LC from 2001 onwards.
Reference: FM40064-20
Brand: Formula
Formula front pump lever fixing screw kit for minibikes and minicross. This pin is an original Formula replacement, and is compatible with original implants.
Reference: 6007
Brand: STAMAS
Front fender sr r factory Stamas. Material: Resin Weight: 126g
Reference: 316.0106
Brand: POLINI
Manual carburetor feed pump 6.5 cm body 316.0106
Polini cylinder for Vespa 200 Pe Px. Polini code: 140.0232 .
The Polini cylinder with a diameter of 68.5 and a stroke of 60mm. it allows to increase the displacement to 221cc, made of aluminum it allows to better dispose of the heat by lowering the operating temperature in the most demanding uses.
The Polini cylinder for Vespa has been revisited by replacing the muffler fastening, obtained from fusion, with a one-piece steel manifold fixed to the cylinder with 4 screws.
The piston is completely redesigned with large passages on the skirt, to facilitate the feeding of the transfer ducts.
The shape of the sky is optimized to increase resistance and cooling.
The head with increased finning on the entire surface allows for maximum heat dispersion. The dome is entirely machined and coupled with a copper gasket to improve performance and optimize cooling; the dowel pins with the cylinder allow for a constant squish area over the entire diameter of the cylinder.
The Polini aluminum cylinder kit for Vespa code 140.0232 increases performance by 6%, compared to the same engine speed compared to the previous model code 140.0084.
Polini aluminum cylinder kit for Vespa: code 140.0232 for VESPA 200 2T COSA – 200 2T PE, PX.
