- Reduced price
- New
- Out-of-Stock

Xmotorstore Payments
Malossi Force Master 2 code 5514754 electronic control unit
Malossi Force Master 2 electronic control unit.
Force Master 2 is the innovative control unit that allows you to vary the injection to adapt perfectly to the new Malossi 4-stroke cylinder kit.
This ECU has been programmed with 4 different mappings so that it can be matched perfectly to your vehicle, whatever its configuration.
The mappings were performed on the static dyno, simulating the actual engine load as if it were on the road. This has allowed us to have a very refined carburetion, comparable to the standard one!
Carburation adjustment
± 20% at min/average/max
Rev limiter: +800 RPM
Original 9,000 - Malossi 9,800
(*) 4 different mappings :
curve 0 : original exhaust, original cylinder, original head, original cam and original filter
curve 1 : Malossi exhaust, original cylinder, original head, original cam and original filter
curve 2 : original exhaust, original cylinder, original head, Malossi cams and original filter
curve 3 : Malossi exhaust, original cylinder, original head, Malossi cams and original filter
Malossi ECU for:
5514754 FORCE MASTER 2 central electr. (injection) X HONDA SH I SCOOPY 300 IE 4T LC 2011
5514754 ECU MALOSSI FORCE MASTER 2 HONDA SH I - SH I SCOOPY 300 IE 4T LC <-2010
5514754 ECU MALOSSI FORCE MASTER 2 HONDA SH I - SH I SCOOPY 300 IE 4T LC 2011->2014
Reference: 5519539
Brand: Malossi
Malossi Force master 2.1 electronic control unit 5519539 for Honda Malossi code: 5519539 The Force Master 2.1 ECU is much easier to configure. Making products more ergonomic and simple to use has always been a Malossi objective: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication...
Reference: 4516328
Brand: Malossi
Malossi mhr screen for Yamaha. Malossi code: 4516328. Dark smoke colored screen. Length 46 cm. Height 28 cm. Depth 0.3 cm. Application: Malossi screen for YAMAHA T MAX 530 ie 4T LC 2012->2014 (J409E) Malossi screen for YAMAHA T MAX 530 ie 4T LC 2015->2016 (J409E)
Reference: Carter+campana.CS
Brand: CS Racing
Cs racing bell carter with bell. Cs racing minimoto clutch cover. Clutch cover available with bell: 81mm 80mm 79mm 78mm 77mm
Reference: TCM2093
Brand: Tecnominimoto
Pulley to the hub for minimoto DM and GRC. Pulley for transmission to the minimoto water pump, compatible with Dm and Grc. The pulley is made of metal, in red color.
Reference: 3113067
Brand: Malossi
Malossi cylinder diameter 47 in cast iron with pin diameter 12 Malossi code: 3113067 Malossi cylinder for Benelli Pepe LX 50 2T euro 2 (QJ1E40QMB-4). Also adaptable to the original head. Fit only with Malossi exhausts. Malossi cylinder for Benelli QuattronoveX 50 2T euro 2. Also adaptable to the original head. Fit only with Malossi exhausts. Malossi...
Reference: WAFLU250
Brand: BMC
BMC Regenerative Fluid 250ML bottle for air filter. Bmc code: WAFLU250. We recommend using only original BMC washing kits, as other products may not be effective or even permanently ruin the filter, invalidating the guarantee.
Reference: 174.0157
Brand: POLINI
Brake pads Peugeot Metropolis 400i Code: 174.0157 Application: Peugeot, Peugeot Metropolis 400i
Reference: 3216857
Brand: Malossi
Malossi Exhaust for Vespa ET3 and Primavera RACING MHR Malossi Code: 3216857 Malossi exhaust for VESPA ET3 Primavera 125 2T. Attention: modifications to the engine crankcase are required for assembly. Malossi exhaust for VESPA Primavera 125 2T. Attention: modifications to the engine crankcase are required for assembly.
Reference: 01.SW.0306.L
Brand: Ohvale
Ohvale Bolt M6x90 Code: 01.SW.0306.L
Reference: 144.305.005
Brand: POLINI
Polini minicross saddle fixing screw 144.305.005
Reference: 6215026BB
Brand: Malossi
Malossi brake pads Malossi code: 6215026BB Malossi brake pads for YAMAHA MAJESTY 400 4T LC up to 2008. Rear. Malossi brake pads for YAMAHA MAJESTY 400 4T LC euro 3 from 2009. Rear. Malossi brake pads for YAMAHA T MAX 500 ie 4T LC 2004-2007. Rear. Malossi brake pads for YAMAHA T MAX 500 ie 4T LC 2008-2011. Rear.
Reference: 01.CA.0034.L
Brand: Ohvale
Ohvale EVO Cover tank fairing matt black or white Code: 01.CA.0034.L
Reference: 18180105
Brand: HJC
Hjc Rpha 1 Quartararo replica helmet. Fabio Quartararo 2023 replica helmet. The RPHA 1 is the same model used by HJC's world-class athletes, in both MotoGP and WorldSBK, and HJC is ready to finally release it in full production with FIM homologation (FRHPhe-01). 4 shell sizes for an optimal fit. Composition of the P.I.M Plus outer shell (carbon fiber,...
Reference: 5514750
Brand: Malossi
Lambda emulator TC UNIT O2 Malossi controller 5514750 Code: 5514750 To further optimize carburetion and transient performance, the use of the O2 controller is recommended. In the latest generation motorbikes, the control unit, thanks to the lambda probe, is able to correct the quantity of fuel that must be injected so that the carburetion is constant,...
Reference: 0721.03
Brand: Domino
Domino 0721.03 throttle control without grips Technopolymer gas control. Support material: Technopolymer Black colour Max travel: 74 mm Rapidity: 3.6 ° / mm Cable Type: Mono Cable
Reference: Grf.rrz.reps.vr
Brand: XRACING
Grc RRZ VRstyle minibike adhesive graphics. Renew your Grc minibike with our high quality Adhesive Graphics for RRZ. Made with industry-premium materials, this graphic is easy to apply directly to the fairing without the use of glue. Customize your style with an on-demand race number. Made to order, fast delivery in 7/12 working days. Update the look of...
Reference: 01.OT.0326.L
Brand: Ohvale
Ohvale Holed screws kit 190 Daytona Code: 01.OT.0326.L
Malossi Force Master 2 code 5514754 electronic control unit
Malossi Force Master 2 electronic control unit.
Force Master 2 is the innovative control unit that allows you to vary the injection to adapt perfectly to the new Malossi 4-stroke cylinder kit.
This ECU has been programmed with 4 different mappings so that it can be matched perfectly to your vehicle, whatever its configuration.
The mappings were performed on the static dyno, simulating the actual engine load as if it were on the road. This has allowed us to have a very refined carburetion, comparable to the standard one!
Carburation adjustment
± 20% at min/average/max
Rev limiter: +800 RPM
Original 9,000 - Malossi 9,800
(*) 4 different mappings :
curve 0 : original exhaust, original cylinder, original head, original cam and original filter
curve 1 : Malossi exhaust, original cylinder, original head, original cam and original filter
curve 2 : original exhaust, original cylinder, original head, Malossi cams and original filter
curve 3 : Malossi exhaust, original cylinder, original head, Malossi cams and original filter