Xmotorstore Payments
Malossi Vespower ignition with 19 mm diameter cone
Malossi Code: 5516951
Malossi Vespower ignition with 19 mm diameter cone and 1.2 kg flywheel
Complete ignition line for the entire vintage Vespa range with gears.
To allow a perfect and easy installation, a specific version has been studied for each model.
The ignition is distinguished by:
- Lightened flywheel (weight 1.2 kg) with moment of inertia as per table, obtained from a forged with external preparation of additional masses (not supplied in the kit).
- 4-pole 12 V (90 Watt) stator with battery charging output.
- Red plastic fan with advanced cooling booster secondary fins (optimized fan profile, absorption distribution).
- Wiring dedicated to each specific application.
-Integrated coil / control unit.
-Voltage regulator.
Malossi ignition compatible with:
5516951 IGNITION MALOSSI VESPA ET3 PRIMAVERA 125 2T WITH Ø 19 CONE AND 1.2 KG FLYWHEEL
5516951 IGNITION VESPOWER MALOSSI CONE 19 VESPA ET3 PRIMAVERA 125 2T FLYWHEEL 1,2KG
Reference: 5517507
Brand: Malossi
Malossi flywheel and stator assembly 5517507 Code: 5517507 Malossi flywheel and stator assembly for Vespower ignition. Flywheel dimensions diameter 125X42 mm
Reference: 5517518
Brand: Malossi
Malossi 5517518 flywheel and fan assembly Code: 5517518 Malossi flywheel and fan assembly for Vespower ignition. Flywheel dimensions diameter 125X42 mm
Reference: 5515480B
Brand: Malossi
Vespower Malossi regulator 5515480B Code: 5515480B Vespower regulator
Reference: 5515476B
Brand: Malossi
Stator for ignition Vespower Malossi 5515476B Code: 5515476B
Reference: 5515479B
Brand: Malossi
Malossi Transducer for Power and Vespower Ignitions 5515479B Code: 5515479B
Reference: 5517159B
Brand: Malossi
Malossi flywheel diameter 125x42 mm 5517159B Code: 5517159B Malossi flywheel for Vepower
Reference: 5519119B
Brand: Malossi
Shielded Malossi spark plug cap 5519119B Malossi code: 5519119B
Reference: 7416936B
Brand: Malossi
Malossi cooling fan diameter 167 mm for Vespower ignition 7416936B Malossi code: 7416936B
Reference: 204.0900/A
Brand: POLINI
Polini piston diameter 50 mm, selection A (49.945 mm) for Minarelli AM6 engine. Polini Code: 204.0900 / A
Reference: 30104203
Brand: HJC
HJC RPHA 12 Visor. Visor for Hjc Rpha 12 full face helmet in various colors. Visor model: HJ-42. Available rpha 12 visor colors: HJC RPHA 12 visor transparent. HJC RPHA 12 visor smoke. HJC RPHA 12 visor dark smoke. HJC RPHA 12 visor red. HJC RPHA 12 visor blue. HJC RPHA 12 visor gold. HJC RPHA 12 visor silver. Replacement visor for original HJC RPHA 12...
Reference: 246.056
Brand: POLINI
Reinforced transmission nuts series M10x1.25 / M12x1.25 Code 246.056 EAN number 8054705117282
Reference: 174.2059
Brand: POLINI
Polini sintered brake pads 39x102x8,3 mm Code: 174.2059 Application: Kymco, Kymco People 125 GTi 4V / 200 GTi / 250/300 GTi, Kymco X Citing 250/500 / 500i, Peugeot, Peugeot Satelis 125/125 4T E3 / 400/500, Peugeot Geopolis 400/500, Peugeot Satelis 2 400, Suzuki, Suzuki Burgman / Skywawe 400 X, K3, K6
Reference: 01.SW.0316.L
Brand: Ohvale
O-RING 5×1.8 Ohvale 160 4SCode: 01.SW.0316.L
Reference: ZOC.200.0301
Brand: Zocchi
Zocchi crown holder pulley. Universal support for minimoto crown, the support includes the housing for the minimoto water pump o-ring.
Reference: 6131.82.50.06
Brand: Domino
Domino cross grips 6131 Pair of Off-road grips. Special ultra soft rubber finish for an excellent grip. Without raised area in the back. Material: Thermoplastic rubber Length: right 120 mm / left 123 mm End: Closed Handlebar / Gas tube diameter: 22/26 mm Grooves for iron wire: 2-3 slots Flange diameter: 60 mm Handle diameter Knob mounted: 30 mm
Reference: 11 9574
Brand: Malossi
Complete Malossi gasket kit for 47 diameter cylinder kit Malossi code: 11 9574
Reference: 4519755B
Brand: Malossi
Malossi Sport windshield for Voge 4519755B Malossi code: 4519755B. Dark smoke colored screen. Length 37 cm. Height 37 cm. Thickness 0.3 cm.
Reference: 01.SW.0132.L
Brand: Ohvale
Ohvale Cylinder head tappet Code: 01.SW.0132.L
Reference: 241.700
Brand: POLINI
Polini Variator for Hi-speed Yamaha T Max 530 Code: 241.700 Variator supplied with two series of rollers of 16.2 gr. and 18 gr. Application: Variator for Yamaha, Variator for Yamaha T Max 530 ie from 2012 to 2016 14 degrees of inclination
Reference: 5212674
Brand: Malossi
Malossi clutch shoes for adjustable automatic clutch 5212674 Malossi code: 5212674 Malossi clutch shoes for adjustable automatic clutch Maxi Delta clutch
Reference: 7717645B
Brand: Malossi
Malossi Maxi Wing clutch bell 7717645B Malossi code: 7717645B Internal diameter 134 mm. External diameter 151 mm. Weight 1132 grams. Technical features: -Bell made of mild steel sheet for deep drawing. -Hub in special turned, welded and broached steel. -Workplace turned within very strict values. -Total dynamic balancing. -Soft nitriding heat treatment.
Reference: 61 7579B
Brand: Malossi
Malossi fixed half-pulley for MULTIVAR variator Malossi code: 61 7579B
Reference: 478 C45T
Brand: PBR
Pbr C45T hardened rear sprocket for Kawasaki available from 43 to 46 teeth. The hardened version greatly increases the life of the crown, ideal for road use and long journeys. Central hole: 80mm Screw hole: 10.5mm Distance between fixing holes: 104mm Chain pitch: 520 Pbr code: 478 (43-45-46) C45T
Reference: 5118055
Brand: Malossi
Malossi Variator Multivar 2000 Mhr for Yamaha Tmax Ie 4t Lc 530cc. Malossi code: 5118055 Malossi Variator Yamaha Tmax 530 ie 4T LC from 2012 to 2014 (J409E). Malossi Variator Yamaha Tmax 530 ie 4T LC from 2015 to 2016 (J409E). Multivar MHR Next was born from the desire to renew the transmission system to take full advantage of its exceptional technical...
Malossi Vespower ignition with 19 mm diameter cone
Malossi Code: 5516951
Malossi Vespower ignition with 19 mm diameter cone and 1.2 kg flywheel
Complete ignition line for the entire vintage Vespa range with gears.
To allow a perfect and easy installation, a specific version has been studied for each model.
The ignition is distinguished by:
- Lightened flywheel (weight 1.2 kg) with moment of inertia as per table, obtained from a forged with external preparation of additional masses (not supplied in the kit).
- 4-pole 12 V (90 Watt) stator with battery charging output.
- Red plastic fan with advanced cooling booster secondary fins (optimized fan profile, absorption distribution).
- Wiring dedicated to each specific application.
-Integrated coil / control unit.
-Voltage regulator.
