Xmotorstore Payments
Rear stump plate Vespa 50 and 125 cc 2t. Polini Code: 170.0501
Vespa 50 cc 2T Special stump plate.
Log plate VEespa 125 cc 2T Primavera ET3.
The new Polini shoe holder plate for classic Vespa is perfectly interchangeable in size with the original.
It guarantees greater resistance to deformations and impacts thanks to the specific high-strength aluminum alloy used for its construction.
Equipped with an O-RING gasket, it replaces the original paper gasket ensuring a perfect seal.
Rear stump plate Vespa 50 and 125 cc 2t. Polini Code: 170.0501
Vespa 50 cc 2T Special stump plate.
Log plate VEespa 125 cc 2T Primavera ET3.
The new Polini shoe holder plate for classic Vespa is perfectly interchangeable in size with the original.
It guarantees greater resistance to deformations and impacts thanks to the specific high-strength aluminum alloy used for its construction.
Equipped with an O-RING gasket, it replaces the original paper gasket ensuring a perfect seal.
Reference: 200.2030
Brand: POLINI
Polini muffler for Vespa 50. Polini code: 200.2030. The Polini 200.2030 muffler is compatible with: VESPA 50 2T SPECIAL
Reference: 200.2030/S
Brand: POLINI
Polini muffler for Vespa 50 aluminum silencer. Polini Code: 200.2030 / S. The Polini 200.2030 / S muffler is compatible with: VESPA 50 2T SPECIAL
Reference: 171.0678
Brand: POLINI
Polini fan for ignition Vespa 125 150 200 Px Pe Sprint fast. Polini code 171.0678. It has been designed to be mounted on all Polini ignitions both with flywheel and with internal rotor for Vespa PX-PE 125/150/200. The Polini CNC fan for Vespa is made of aluminum and is machined from solid. This fan was created to support the power of Evolution engines...
Reference: 170.0307
Brand: POLINI
Polini clutch cover for Vespa Primavera Et3 50cc 125cc. Polini Code: 170.0307 Compatible with: VESPA 50 2T SPECIAL - VESPA 125 2T PRIMAVERA ET3
Reference: 01.FA.0007.L
Brand: Ohvale
Tcei screw m6x40 uni 5931 Ohvale. Ohvale Code: 01.FA.0007.L
Reference: 1315597b
Brand: Malossi
Malossi bellows diameter 45.5x66x170 mm for PHBH 28-30 B VESPA carburetors Malossi code: 1315597b
Reference: 950.830.052
Brand: POLINI
hi-speed e-bike brose - special.t.levo/kenevo/mahle special.sl 5 pin 950.830.052 POLINI HI-Speed is an electronic device designed for E-bike motors in order to circumvent the motor stopping at 25 km/h and consequently increase active assistance by fully exploiting the performance that the motor can offer. Polini HI-Speed is very easy to install as the...
Reference: 282.0003
Brand: POLINI
APRILIA: AF1 50 MINARELLI AM6 - MX 50 Minarelli AM6 - RS 50 MINARELLI AM6 - RX 50 MINARELLI AM6 - TUONO 50 Minarelli AM6BETA: RR 50 AM6 (1999-2002) - RR 50 SM AM6 (2002-2004) - RR 50 ENDURO, MOTARD 50 ALU AM6 2003FANTIC MOTOR: CABALLERO 05 Minarelli AM6HM - VENT: CRE 50 Minarelli AM6 - CRE 50 SIX 2003/2005 Minarelli AM6 - DERAPAGE 50 2001/02 Minarelli AM6...
Reference: 3214813B
Brand: Malossi
Malossi 3214813B exhaust manifold for Rx muffler Code: 3214813B Malossi exhaust manifold for Rx muffler
Reference: 248.075
Brand: POLINI
Polini variator belt for Sym Hd 200 Aramid Code: 248.075 Application: Sym, Sym HD 200 ie / 200 2I ie
Reference: Kondor125ccLem
Brand: Lem motor
Quad for kids Lem Kondor 125cc 4t. Quad Kondor 125cc, the new Lem motors sports quad, with giant 8-inch wheels, increased exhaust, reinforced frame, perfect for children and adults. 4-stroke single-cylinder engine with rear Displacement 125cc Carburetor power supply Tank capacity 4.5lt unleaded petrol fuel CDI ignition Electric start Type of automatic...
Reference: 6118485
Brand: Malossi
Complete Malossi transmission group 6118485 Code: 6118485 Complete transmission group Malossi Over Range Mhr next Yamaha T Max 530 cc This new system is based on the new Multivar MHR Next variator, which, combined with the other components, allows to achieve truly unique performances! The torque driver (mobile pulley) has a larger diameter than the...
Reference: 285.0137
Brand: POLINI
APRILIA: AF1 50 MINARELLI AM6 - MX 50 Minarelli AM6 - RS 50 MINARELLI AM6 - RX 50 MINARELLI AM6 - TUONO 50 Minarelli AM6BETA: RR 50 AM6 (1999-2002) - RR 50 SM AM6 (2002-2004) - RR 50 ENDURO, MOTARD 50 ALU AM6 2003FANTIC MOTOR: CABALLERO 05 Minarelli AM6HM - VENT: CRE 50 Minarelli AM6 - CRE 50 SIX 2003/2005 Minarelli AM6 - DERAPAGE 50 2001/02 Minarelli AM6...
Reference: 03.IF.0062.L
Brand: Ohvale
Ohvale kit pistons Code: 03.IF.0062.L
Reference: 166.0100
Brand: POLINI
Polini cylinder kit diameter 63 mm. Polini Code: 166.0100 Polini cylinder kit for: Benelli, Benelli Velvet 125, Benelli Velvet 150, Italjet, Italjet Millenium 125, Italjet Millenium 150, Malaguti, Malaguti Madison 125, Malaguti Madison 150, Malaguti F 12 125 Phantom, Mbk, Mbk Doodo 125, Mbk Doodo 150, Mbk Skyliner 125, Mbk Skyliner 150, Mbk Thunder 125,...
Reference: F00 005
Brand: DM
Rear hub dm for hydraulic brake Formula Lightened rear hub 114 mm DM weight 190g THE HUB DOES NOT INCLUDE THE BEARINGS
Reference: 6217604
Brand: Malossi
Malossi brake pad Malossi code: 6217604 Malossi brake pad for Vespa ET3 Primavera 125 2T rear. Malossi brake pad for Vespa Primavera 125 2T rear. Malossi brake pad for Vespa Special 50 rear.
Reference: 18162105
Brand: HJC
Hjc Rpha 1 Nomaro Helmet. The RPHA 1 was designed and developed after several years of focused effort and crucial feedback from the best world-class athletes in MotoGP. HJC engineers have worked to create a racing helmet that is truly worthy of the best racing circuits in the world. The RPHA 1 is the same model used by HJC's world-class athletes, in both...
Reference: 140.0050/E
Brand: POLINI
Polini Evolution Kit for Vespa 125 2T Primavera ET3. Polini code: 140.0050/E Polini Motori presents the new Evolution kit with rotary valve intake for Vespa 125 Primavera ET3. An absolute novelty tested not only on the test bench and in the racing department, but also by the Polini Team on the occasion of the 500 km Endurance in Pomposa, which confirms...
Rear stump plate Vespa 50 and 125 cc 2t. Polini Code: 170.0501
Vespa 50 cc 2T Special stump plate.
Log plate VEespa 125 cc 2T Primavera ET3.
The new Polini shoe holder plate for classic Vespa is perfectly interchangeable in size with the original.
It guarantees greater resistance to deformations and impacts thanks to the specific high-strength aluminum alloy used for its construction.
Equipped with an O-RING gasket, it replaces the original paper gasket ensuring a perfect seal.
