- Reduced price
- New
Xmotorstore Payments
Malossi Variator Multivar Mhr Team 2 for Piaggio 2000 5118238
Code: 5118238
With the MULTIVAR MHR TEAM 2 variator, do not be surprised if your scooter will acquire a click, a linear shifting, greater mechanical "tranquility" when driving at high speeds and a constant performance unknown to the basic version!
TECHNICAL NOTES:
The bushing is the contact point between the half-pulley and the variator hub and must slide radially and axially without undergoing deformation.
With this in mind, we have improved the entire apparatus using case-hardened and ground steel bushings, both on the internal and external diameter, and, thanks to the use of 2 oil seals, the lubricating grease present in a tank touches the walls of the coupling. hub bushing ensuring minimum friction in any condition, as well as maximum efficiency performance.
Even the 22 mm variator hub has been improved in design: in fact, holes have been made that join the internal and external chambers for the flow of grease and increase lubrication.
This technology also makes it possible to reduce tolerances and, consequently, all coupling clearances are also perfected and optimized.
Inside the variator kit there is a mobile half-pulley with a diameter of 99.5 made of a special die-cast aluminum alloy.
The contact surface between pulley and belt has been finished with a diamond tool with extreme precision to ensure a constant coefficient of friction, calculated to prevent slippage of the belt and, at the same time, to avoid premature wear.
In order to meet all the requirements of the countless possible calibrations in a racing vehicle, depending on the tracks and the specific engine set-up, Multivar MHR is supplied with two sets of 6-roller kits and a contrast spring. in pre-hardened chromium-silicon alloy steel with anti-clockwise winding (racing). In addition, different springs of the same class with differentiated load are available as options.
Malossi variator compatible with:
5118238 VARIATOR MALOSSI MHR TEAM 2 PIAGGIO GILERA
5118238 VARIATOR MALOSSI MHR TEAM 2 APRILIA MOJITO CUSTOM 50 2T
5118238 VARIATOR MALOSSI MHR TEAM 2 APRILIA SR (carb.) 50 2T LC 2004-> (PIAGGIO)
5118238 VARIATOR MALOSSI MHR TEAM 2 APRILIA SR MOTARD 50 2T euro 2
5118238 VARIATOR MALOSSI MHR TEAM 2 APRILIA SR R (carb.) 50 2T LC (PIAGGIO)
5118238 VARIATOR MALOSSI MHR TEAM 2 APRILIA SR R 50 2T LC euro 4 2018-> (PIAGGIO CA81M)
5118238 VARIATOR MALOSSI MHR TEAM 2 APRILIA SR Street 50 2T LC euro 2
5118238 VARIATOR MALOSSI MHR TEAM 2 DERBI ATLANTIS - BULLET 50 2T 2003->
5118238 VARIATOR MALOSSI MHR TEAM 2 DERBI GP1 50 2T LC
5118238 VARIATOR MALOSSI MHR TEAM 2 DERBI GP1 OPEN 50 2T LC
5118238 VARIATOR MALOSSI MHR TEAM 2 DERBI GP1 REVOLUTION 50 2T LC
5118238 VARIATOR MALOSSI MHR TEAM 2 DERBI VARIANT Sport 50 2T
5118238 VARIATOR MALOSSI MHR TEAM 2 GILERA ICE 50 2T
5118238 VARIATOR MALOSSI MHR TEAM 2 GILERA RUNNER 50 2T LC
5118238 VARIATOR MALOSSI MHR TEAM 2 GILERA RUNNER SP 50 2T LC <-2005
5118238 VARIATOR MALOSSI MHR TEAM 2 GILERA RUNNER SP 50 2T LC 2006-> (C451M)
5118238 VARIATOR MALOSSI MHR TEAM 2 GILERA STALKER 50 2T
5118238 VARIATOR MALOSSI MHR TEAM 2 GILERA TYPHOON X 50 2T
5118238 VARIATOR MALOSSI MHR TEAM 2 ITALJET JET SET 50 2T
5118238 VARIATOR MALOSSI MHR TEAM 2 PIAGGIO DIESIS 50 2T
5118238 VARIATOR MALOSSI MHR TEAM 2 PIAGGIO FLY 50 2T
5118238 VARIATOR MALOSSI MHR TEAM 2 PIAGGIO NRG EXTREME 50 2T
5118238 VARIATOR MALOSSI MHR TEAM 2 PIAGGIO NRG EXTREME 50 2T LC
5118238 VARIATOR MALOSSI MHR TEAM 2 PIAGGIO NRG MC2 50 2T LC 1998->
5118238 VARIATOR MALOSSI MHR TEAM 2 PIAGGIO NRG MC3 DD 50 2T LC
5118238 VARIATOR MALOSSI MHR TEAM 2 PIAGGIO NRG MC3 DT 50 2T
5118238 VARIATOR MALOSSI MHR TEAM 2 PIAGGIO NRG Power 50 2T LC euro 4 2018-> (CA71M)
5118238 VARIATOR MALOSSI MHR TEAM 2 PIAGGIO NRG Power DD 50 2T LC
5118238 VARIATOR MALOSSI MHR TEAM 2 PIAGGIO NRG Power DT 50 2T (C453M)
5118238 VARIATOR MALOSSI MHR TEAM 2 PIAGGIO TYPHOON 50 2T 2007-> 2010
5118238 VARIATOR MALOSSI MHR TEAM 2 PIAGGIO TYPHOON 50 2T euro 2 2011-> 2017 (C421M)
5118238 VARIATOR MALOSSI MHR TEAM 2 PIAGGIO ZIP 50 2T 2000-> (C25EM)
5118238 VARIATOR MALOSSI MHR TEAM 2 PIAGGIO ZIP SP 50 2T LC 2001->
5118238 VARIATOR MALOSSI MHR TEAM 2 VESPA ET2 50 2T 2000->
5118238 VARIATOR MALOSSI MHR TEAM 2 VESPA LX 50 2T
5118238 VARIATOR MALOSSI MHR TEAM 2 VESPA Primavera 50 2T euro 2 (C533M)
5118238 VARIATOR MALOSSI MHR TEAM 2 VESPA S 50 2T euro 2 (C381M)
5118238 VARIATOR MALOSSI MHR TEAM 2 VESPA Sprint 50 2T euro 2
Reference: 6115790B
Brand: Malossi
Malossi VENTILVAR 2000 half-pulley Malossi code: 6115790B Malossi half-pulley for APRILIA MOJITO CUSTOM 50 2T. Malossi half-pulley for APRILIA SCARABEO CLASSIC 50 2T euro 4 2018 CA91M. Malossi half-pulley for APRILIA SCARABEO STREET 50 2T (PIAGGIO). Malossi half-pulley for APRILIA SCARABEO STREET 50 2T euro 4 2018 CA91M. Malossi half-pulley for APRILIA...
Reference: 6118237B
Brand: Malossi
Malossi mobile half-pulley for MULTIVAR MHR TEAM 2 variator Malossi code: 6118237B
Reference: 6118836
Brand: Malossi
Complete Malossi OVER RANGE Piaggio 2000 transmission group (short crankcase) Malossi code: 6118836 Malossi transmission group for PIAGGIO ZIP 50 2T 2000 (C25EM). Malossi transmission group for PIAGGIO ZIP SP 50 2T LC 2001. Malossi transmission group for VESPA ET2 50 2T 2000. Malossi transmission group for VESPA LX 50 2T. Malossi transmission group for...
Reference: 6118835
Brand: Malossi
Complete Malossi OVER RANGE Piaggio transmission unit (long crankcase) Malossi code: 6118835 Malossi transmission unit for APRILIA MOJITO CUSTOM 50 2T. Malossi transmission unit for APRILIA SR (carb.) 50 2T LC 2004 (PIAGGIO). Malossi transmission unit for APRILIA SR MOTARD 50 2T euro 2. Malossi transmission unit for APRILIA SR MOTARD 50 2T euro 4 2018...
Reference: 6119040
Brand: Malossi
Malossi OVER RANGE complete transmission unit for Piaggio engines Malossi code: 6119040 Malossi transmission unit for GILERA EASY MOVING 50 2T. Malossi transmission unit for PIAGGIO QUARTZ 50 2T LC. Malossi transmission unit for PIAGGIO SFERA RESTYLING 50 2T. Malossi transmission unit for PIAGGIO ZIP Fast Rider 50 2T. Malossi transmission unit for PIAGGIO...
Reference: 6115781
Brand: Malossi
Complete transmission unit Malossi OVER RANGE MHR - PIAGGIO 2000 (long crankcase) Malossi code: 6115781 Malossi transmission unit for APRILIA MOJITO CUSTOM 50 2T. Malossi transmission unit for APRILIA SR (carb.) 50 2T LC 2004 (PIAGGIO). Malossi transmission unit for APRILIA SR MOTARD 50 2T euro 2. Malossi transmission unit for APRILIA SR R (carb.) 50 2T...
Reference: 6115780
Brand: Malossi
Complete transmission unit Malossi OVER RANGE MHR - PIAGGIO 2000 (short crankcase) Malossi code: 6115780 Malossi transmission unit for PIAGGIO ZIP 50 2T 2000 (C25EM). Malossi transmission unit for PIAGGIO ZIP SP 50 2T LC 2001. Malossi transmission unit for VESPA ET2 50 2T 2000. Malossi transmission unit for VESPA LX 50 2T. Malossi transmission unit for...
Reference: 25 9021B
Brand: Malossi
Malossi roller guide cap for variator 25 9021B Malossi code: 25 9021B Malossi roller guide cap for Multivar 2000 variator.
Reference: 280.0017
Brand: POLINI
Polini pin cage dimensions 10x14x13 mm. Polini code: 280.0017
Reference: 950.830.052
Brand: POLINI
hi-speed e-bike brose - special.t.levo/kenevo/mahle special.sl 5 pin 950.830.052 POLINI HI-Speed is an electronic device designed for E-bike motors in order to circumvent the motor stopping at 25 km/h and consequently increase active assistance by fully exploiting the performance that the motor can offer. Polini HI-Speed is very easy to install as the...
Reference: 0507.03-01
Brand: Domino
Domino gas control for twin cylinder 0507.03-01 with knobs. Zamak gas control with closed black knobs. Support material: Zamak Support finish: Painted Black colour Max stroke: 45 mm Rapidity: 3.4 ° / mm Cable Type: 2 Cables
Reference: 01.SZ.0210.L
Brand: Ohvale
Ohvale Inlet valve 110 4S Code: 01.SZ.0210.L
Reference: 6117244
Brand: Malossi
X Special belt Malossi belt 25.5x10.5x902 mm angle 31 Malossi code: 6117244 Malossi belt for MBK OCITO 125 ie 4T euro 3. Malossi belt for YAMAHA AEROX 155 ie 4T LC 2017-> Malossi belt for YAMAHA BW'S 125 ie 4T LC euro 4 2019-> Malossi belt for YAMAHA CYGNUS GRYPHUS 125 ie 4T LC euro 4 2019-> Malossi belt for YAMAHA N MAX 125 ie 4T LC euro 3...
Reference: 5911962
Brand: Malossi
Camshaft Malossi Power cam 5911962. Malossi S.p.A. is pleased to make available to its customers a new series of high performance camshafts for 4-stroke scooters. This new camshaft was created by taking advantage of Malossi's experience and technical know-how in the design and manufacture of special components for sport tourism use. Designed with the...
Reference: 060044
Brand: T4TUNE
Moto indicators approved OVAL SILVER with LEDs
Reference: 01.AS.0287.L
Brand: Ohvale
Ohvale Gasket set PHBL Code: 01.AS.0287.L
Reference: 3115374
Brand: Malossi
Malossi cylinder kit diameter 52 in aluminum Testa Rossa modular head Malossi code: 3115374 Malossi cylinder kit for APRILIA APRILIA AREA 51 50 2T LC: Work on the engine crankcase: boring and connection. To be combined exclusively with crankshaft 5317827 and Malossi muffler 3216827 scooter racing MHR diameter 52 Big Bore. Malossi cylinder kit for...
Reference: FM999/01
Brand: BMC
Bmc air filter yamaha WR 250 F 2015-2018 washable racing Sport FM999/01 The cotton sports air filter is installed in the airbox to replace the original air filter. It is produced with highly performing materials that allow an increase in the air flow to the engine compared to the original paper or sponge air filter, while ensuring superior filtration...
Reference: 01.SW.0122.L
Brand: Ohvale
Ohvale Inlet pipe gasket Codice: 01.SW.0122.L
Reference: 404619
Brand: T4TUNE
Right front indicator Kymco Agility. Code: 404619 Ean: 9900000059866
Reference: GHR 071.024
Brand: GHR
Reed Ghr carbon braided 0.24 high tech
Reference: 201.1903
Brand: POLINI
Polini Cp carburetor diameter 19 mm Evolution Code 201.1903 EAN number 8054705051753 Polini 19 Evolution carburettor, the Polini cp 19 evolution carburettor is intended for competition, and for racing use, it is necessary to eliminate the standard mixer. Polini cp 19 evolution carburetor features: Maximum jet 106 Minimum Jet 38 Needle 12/22 24x30 valve...
Reference: GHR 032.002
Brand: GHR
G-radius black Ghr minimoto clutch plate with 2 adjustable masses. The best clutch plate for a precise and quick setting of your clutch. Plate weight 130g compatible with Iame, Cs, Bzm, Polini, Ghr, Zocchi engine.
Reference: 4519881
Brand: Malossi
Malossi Sport windshield for Italjet 4519881 Malossi code: 4518330B. Dark smoke colored screen. Length 35 cm. Height 30 cm. Thickness 0.3 cm.
Malossi Variator Multivar Mhr Team 2 for Piaggio 2000 5118238
Code: 5118238
With the MULTIVAR MHR TEAM 2 variator, do not be surprised if your scooter will acquire a click, a linear shifting, greater mechanical "tranquility" when driving at high speeds and a constant performance unknown to the basic version!
TECHNICAL NOTES:
The bushing is the contact point between the half-pulley and the variator hub and must slide radially and axially without undergoing deformation.
With this in mind, we have improved the entire apparatus using case-hardened and ground steel bushings, both on the internal and external diameter, and, thanks to the use of 2 oil seals, the lubricating grease present in a tank touches the walls of the coupling. hub bushing ensuring minimum friction in any condition, as well as maximum efficiency performance.
Even the 22 mm variator hub has been improved in design: in fact, holes have been made that join the internal and external chambers for the flow of grease and increase lubrication.
This technology also makes it possible to reduce tolerances and, consequently, all coupling clearances are also perfected and optimized.
Inside the variator kit there is a mobile half-pulley with a diameter of 99.5 made of a special die-cast aluminum alloy.
The contact surface between pulley and belt has been finished with a diamond tool with extreme precision to ensure a constant coefficient of friction, calculated to prevent slippage of the belt and, at the same time, to avoid premature wear.
In order to meet all the requirements of the countless possible calibrations in a racing vehicle, depending on the tracks and the specific engine set-up, Multivar MHR is supplied with two sets of 6-roller kits and a contrast spring. in pre-hardened chromium-silicon alloy steel with anti-clockwise winding (racing). In addition, different springs of the same class with differentiated load are available as options.