Xmotorstore Payments
Lambda sensor Alfano 40 cm A2501. This LAMBDA sensor must be installed on the exhaust. The value read by this 2-wire lambda probe is effective when the exhaust gases are equal to or greater than 300 °, i.e. only during the acceleration phase.
Note: this sensor must be used with an extension cable ref. A3401.
Designed for the module: Box12.
Lambda sensor Alfano 40 cm A2501. This LAMBDA sensor must be installed on the exhaust. The value read by this 2-wire lambda probe is effective when the exhaust gases are equal to or greater than 300 °, i.e. only during the acceleration phase.
Note: this sensor must be used with an extension cable ref. A3401.
Designed for the module: Box12.
Reference: A3401
Brand: Alfano
135 cm Alfano A3401 thermocouple extension, to connect all Alfano thermocouple sensors.
Reference: A2505
Brand: Alfano
Stainless steel bracket for mounting the A2503 Lambda sensor or the A2501 Lambda sensor. Alfano code: A2505 Description of Alfano A2505 bracket: Threaded stainless steel bracket for fixing the A2503 or A2501 Lambda sensor, to be welded to the exhaust pipe, includes a bolt (works as a cap).
Reference: 215.0112
Brand: POLINI
Polini double lamellar intake manifold for Vespa 50 ET3 19mm. Polini Code: 215.0112 THE POLINI THERMAL GROUP AND THE POLINI INTAKE MANIFOLD MUST BE ASSEMBLED TOGETHER!
Reference: 311.0107
Brand: POLINI
Polini 90 ° fitting Polini fitting for: F.Morini, F.Morini GS.A 50, F.Morini TA 50, Malaguti, Malaguti Fifty 50, Malaguti RCX / W 50
Reference: 2511214B
Brand: Malossi
Malossi roller guide cap for variator 2511214B Malossi code: 2511214B Malossi roller guide cap for Multivar 2000 variator.
Reference: 176.0089
Brand: POLINI
Polini brake shoes for Lambretta (without spring) d.152x25 mm Code 176.0089 Application: Lambretta, Lambretta 125 LI / 150 LI / 175 LI / 175 TV II These brake pads for Lambretta are compatible as original spare parts.
Reference: 03.PE.0004.L
Brand: Ohvale
Ohvale Gp-2 and Gp-0 Evo right footpeg support. Ohvale code: 03.PE.0004.L
Reference: 01.IF.0092.L
Brand: Ohvale
Ohvale Complete brake lever Code: 01.IF.0092.L
Reference: 01.SW.0605.L
Brand: Ohvale
PIN 10×14 Ohvale 160 4S Code: 01.SW.0605.L
Reference: getto massimo Polini cp
Brand: POLINI
Polini main jet for Cp Keihin Pwk carburetor (available from 40 to 119)
Reference: 6114885
Brand: Malossi
Complete over range transmission unit for Yamaha t-max ie 2004-2011 500cc Yamaha t-max 500 ie 4t lc 2004-2007. Malossi code: 6114885. Yamaha TMAX 500 ie 4T LC 2004-2007 transmission kit. Yamaha TMAX 500 ie 4T LC 2008-2011 transmission kit. The Over Range is also renewed: new variator and new belt! This new system is based on the new Multivar MHR Next...
Reference: 01.SZ.0914.L
Brand: Ohvale
Ohvale Contact gear indication Code: 01.SZ.0914.L
Reference: 67 3236
Brand: Malossi
Malossi HTQ primary gears z 17 / 40 67 3236 Malossi code: 67 3236. The new HTQ gears have been designed and manufactured with straight/helical teeth to minimize friction losses and stress on the supports. Furthermore, our gears optimize the ratio allowing you to exploit all the power delivered by your vehicle, guaranteeing you a considerable extension...
Reference: 248.101
Brand: POLINI
Polini variator belt for Sym Joyride 200 Aramid Code: 248.101 Application: Sym, Sym Joyride 200
Reference: 1115148b
Brand: Malossi
Malossi gasket kit complete for shock absorbers RS24 / 10 / 10 - R Malossi code: 1115148b
Reference: 6118154
Brand: Malossi
Malossi over range Mhr Next transmission for Yamaha Tmax 530cc 560cc. Malossi Code: 6118154 Malossi transmission over range Yamaha TMAX 530 ie 4T LC euro 4 2017 (J415E) Malossi transmission over range Yamaha TMAX 560 ie 4T LC euro 5 2020 2021 (J420E) Malossi transmission over range Yamaha TMAX 560 ie 4T LC euro 5 2022 Malossi transmission over range...
Reference: 01.CE.0006.L
Brand: Ohvale
Ohvale Tools trousse 190 Daytona Comprehends: - 4 Allen keys (3mm,4mm,5mm,6mm) - 8/10 wrench - Spark plug key Code: 01.CE.0006.L
Reference: 29 3750
Brand: Malossi
Malossi reinforced clutch spring for Piaggio and Vespa Malossi code: 29 3750
Lambda sensor Alfano 40 cm A2501. This LAMBDA sensor must be installed on the exhaust. The value read by this 2-wire lambda probe is effective when the exhaust gases are equal to or greater than 300 °, i.e. only during the acceleration phase.
Note: this sensor must be used with an extension cable ref. A3401.
Designed for the module: Box12.
