- New

Xmotorstore Payments
Alfano temperature sensor candle 10 mm A2157. This K thermocouple technology sensor must be installed with a 10mm diameter plug, 40cm cable length.
Caution: It is important to remove the sealing washer from the spark plug before installation.
Note: This sensor must be used with an A3401 extension cable or A2190 hub.
Alfano temperature sensor candle 10 mm A2157. This K thermocouple technology sensor must be installed with a 10mm diameter plug, 40cm cable length.
Caution: It is important to remove the sealing washer from the spark plug before installation.
Note: This sensor must be used with an A3401 extension cable or A2190 hub.
Reference: 0717472
Brand: Malossi
Malossi 8 mm cylinder base shim kit for VespaMalossi code: 0717472Malossi cylinder base shim kit for Vespa ET3 Primavera 125 2T. Attention: only for Malossi crankshaft 5316517.Malossi cylinder base shim kit for Vespa ETS 125 2T. Attention: only for Malossi crankshaft 5316517.Malossi cylinder base shim kit for Vespa PK 125 2T. Attention: only for Malossi...
Reference: A561
Brand: Alfano
Alfano 32 cm protective steering wheel cover. Alfano code: A561 Kart steering wheel cover, with 32 cm steering wheel diameter.
Reference: 3019790
Brand: Malossi
Malossi Mix Bottle 250 ml Malossi Code: 3019790 Mix Features The 250 ml oil measuring bottle for mixture with cap is easy to use thanks to the graduated scale with double numbering. It offers 3 graduation columns to prepare mixtures at 2%, 2.5% and 3%. Made of resistant and high quality material, it is reusable and easily transportable thanks to its...
Reference: HJ05
Brand: HJC
Visor HJC HJ05. Visor suitable for: HJC ZF10 HJC CLY HJC SMAX HJC CS-12N HJC CL-12 HJC ZF9 HJC K-Dual HJC CS-14
Reference: 280.0059
Brand: POLINI
Polini 100 crankshaft bearing dimensions 25X52X15 C4 Code 280.0059 EAN number 8054705085222 Spare parts for Polini Evolution P.R.E.
Reference: 5314562
Brand: Malossi
Malossi 5314562 complete connecting rod with 80 mm centre distance Malossi code: 5314562 Malossi complete connecting rod with 80 mm centre distance.
Reference: 3218791
Brand: Malossi
Malossi silencer with external diameter 50 and inlet diameter 20 mm Malossi code: 3218791
Reference: 102
Brand: DM
Trim variation kit Dm 4 holes, in aluminum. Dm Code: 102
Reference: 01.SZ.0315.L
Brand: Ohvale
O-RING 44×2.5 Ohvale 110 4S Code: 01.SZ.0315.L
Reference: 203.0172
Brand: POLINI
Polini air filter for Peugeot Fox. Polini code: 203.0172 The Polini Original Air Filters are made of high efficiency flexible polyurethane foam with a cross-linked polyester base. Polini air filters for Honda and Peugeot mopeds are composed of two layers of sponge; a finer one of light blue color with porosity of 60 PPI and a more open one of black color...
Reference: GHR 003.001
Brand: GHR
Ghr h2o increased head cover black. New oversized Ghr head machined from solid for 40 and 50 cc liquid-cooled engines.
Reference: 144.250.001
Brand: POLINI
Minicross silencer joint Code: 144.250.001
Reference: 5111567
Brand: Malossi
Malossi Multivar 2000 5111567 variator Code : 5111567
Reference: 29 9605
Brand: Malossi
Malossi RACING clutch spring set Malossi code: 29 9605 RACING SPRING for ORIGINAL clutch for MALOSSI FLY and DELTA clutches Pre-hardened carbon steel springs with high yield strength, protected by a high heat resistance paint in various colors. The different colors highlight the load of each series of springs.
Reference: 210.0013
Brand: POLINI
PEUGEOT: 103 - 104 - 105 - GL 10 - 103 SPX 50 PEUGEOT MOTOR SHAFT 103 ELECTRONIC IGNITION
Reference: 104134
Brand: Motul
Motul oil 300V Factory line off road 5W-40 4t 104134 (1 liter). High performance lubricant developed for the "Official Teams" and formulated to offer maximum power, better "grip" of the clutches together with exceptional engine and gearbox protection during the most extreme conditions of use. For 4-stroke engines with or without integrated gearbox, with...
Alfano temperature sensor candle 10 mm A2157. This K thermocouple technology sensor must be installed with a 10mm diameter plug, 40cm cable length.
Caution: It is important to remove the sealing washer from the spark plug before installation.
Note: This sensor must be used with an A3401 extension cable or A2190 hub.