- On sale!
- Reduced price
- New
Xmotorstore Payments
Vespa ET3 intake manifold for Polini carburetor assembly cp. Polini Code: 215.0118
Can be combined with the Polini CP 24 carburetor code 201.2402
Vespa ET3 intake manifold for Polini carburetor assembly cp. Polini Code: 215.0118
Can be combined with the Polini CP 24 carburetor code 201.2402
Reference: 201.2400
Brand: POLINI
Polini Cp carburettor d.24 evolution air starter manual knob. 24 Polini carburetor settings: Maximum jet 112 Minimum Jet 40 Needle 14/22 25x30 valve Pulverizer bush d.2,7 Air wire connection Ø 60 mm Carburetor sleeve Ø 28.5 mm Polini Code: 201.2400
Reference: 176.0128/R
Brand: POLINI
Polini Brake Shoes for Vespa Racing (without spring) d. 150x24 mm Code: 176.0128/R Application: Polini brake shoes for Vespa Racing (without spring) Vespa 50 2T PK, Polini brake shoes for Vespa Racing (without spring) Vespa 50 2T XL, Polini brake shoes for Vespa Racing (without spring) Vespa 125 2T FL (6 Springs), Shoes Polini brake shoes for Vespa Racing...
Reference: 2015460
Brand: Malossi
Malossi 2015460 spring preload adjustment kit for Yamaha T Max Malossi Code: 2015460 Malossi spring preload adjustment kit for original fork for Yamaha T Max. Technical features: -Very light, entirely made of 6000 series aluminum alloy (with magnesium and silicon) -Preload adjustment cap range -5 / +25 mm -Laser engraving on the cap, for even easier...
Reference: 3216588
Brand: Malossi
Malossi WILD LION approved exhaust for MBK and Yamaha Malossi code: 3216588 Malossi exhaust for MBK FLIPPER 50 2T. Type: SA03 var.1 - ver.2. The "type" only specifies for which model the approval is valid, it does not limit assembly. Malossi exhaust for MBK OVETTO 50 2T. Not approved for this vehicle. The lack of approval does not limit assembly. Malossi...
Reference: 61 6295
Brand: Malossi
Malossi z14 sprocket for Gilera 125 cc 2T Malossi code: 61 6295 Malossi sprocket for GILERA KR1 125 2T. Malossi sprocket for GILERA MX1 125 2T. Malossi sprocket for GILERA R1 125 2T.
Reference: 01.FA.0290.L
Brand: Ohvale
Complete OHRACING fork tool kit for Ohvale GP-0 / GP-2. Includes 7 professional tools for fork service and maintenance.
Reference: 6015
Brand: STAMAS
Screw kit for front fairing and Stamas tail.
Reference: 0816707B
Brand: Malossi
Silent block Malossi diameter 60x15 mm for engine mount for Gilera Typhoon 4T LC 0816707B Malossi code: 0816707B
Reference: 143.705.012
Brand: POLINI
Polini reverso clutch shoe set. The Polini reverso minimoto clutch pads are specific and unique for the reverse engine. Polini Code: 143.705.012
Reference: 04 3687
Brand: Malossi
Malossi air filter with 51 mm inlet for SHA carburetors. Malossi code: 04 3687 Malossi air filter for Piaggio Ciao and 50cc 2t mopeds, with carburetor: sha 12/10 - 12/12 - 13/13. Malossi air filter for Italjet Pack 50 2T. Malossi air filter for Piaggio Bravo 50 2T. Malossi air filter for Piaggio Boss 50 2T. Malossi air filter for Piaggio Boxer 50 2T....
Reference: 214.0118
Brand: POLINI
Support for Aprilia Malaguti Funky muffler. Polini code: 214.0118
Reference: 01.SD.0626.L
Brand: Ohvale
Ohvale Spring lever clutch Code: 01.SD.0626.L
Reference: 209.0322
Brand: POLINI
Polini gasket set for Rotax 123 engine 209.0322 Code: 209.0322 Polini gaskets set for: Aprilia, Aprilia Sport 125, Aprilia AF1 125, Aprilia Europa 125, Aprilia Pegaso 125, Aprilia Red rose 125, Aprilia RS 125, Aprilia RX 125 R, Aprilia Tuareg Rally 125, Aprilia Tuareg wind 125, Aprilia SX 125 , Polini, Rotax, Rotax 122, Rotax 123, Hm, Hm Derapage 125, Hm...
Reference: 31 7083
Brand: Malossi
Malossi cylinder kit diameter 47 in cast iron with pin diameter 10 Malossi code: 31 7083 Malossi cylinder kit for AEON MOTOR COBRA 50 2T AT70 if the crankshaft has a pin Ø 12 mount the piston 34 7036. Malossi cylinder kit for APRILIA GULLIVER 50 2T if the crankshaft has a pin Ø 12 mount the piston 34 7036. Malossi cylinder kit for APRILIA RALLY 50 2T...
Reference: 01.SB.0410.L
Brand: Ohvale
Ohvale Bolt M6x90 Code: 01.SB.0410.L
Reference: 01.TE.0006.L
Brand: Ohvale
Galvanized U-bolt for Gp-0 and Gp-1 rear shock absorber fixing. Ohvale code: 01.TE.0006.L
Vespa ET3 intake manifold for Polini carburetor assembly cp. Polini Code: 215.0118
Can be combined with the Polini CP 24 carburetor code 201.2402