Polini clutch for race Vespa px 125 150 200e with z23 helical teeth pinion 230.0533

Polini clutch for race Vespa px 125 150 200e with z23 helical teeth pinion.

Polini code: 230.0533

Compatible with:

VESPA: 125 2T PX - 125 2T T5 - 125 2T TS - 125/150 2T COSA - 150 2T PX - 150 2T SPRINT VELOCE - 200 2T COSA - 200 2T PE, PX.

The Polini HT For Race clutch represents the pinnacle of technology for the Vespa PX or PE.

Attention: CHECK THE TEETH INSTALLED IN THE ENGINE.

Attention: CHECK THAT THE ORIGINAL THICKNESS OF THE MIXER IS 3.7 mm.

The Polini HT For Race clutch represents the pinnacle of technology for the Vespa PX or PE.

Thanks to its innovative reversed operation layout, the part connected to the crankshaft is no longer the external bell, but the internal hub.

The main features are:

Pressure plate on axial bearing.

Aluminium bell.

Coat machined from solid with oil collection channel.

The aluminium discs with increased surface area of ​​8 teeth maximise the efficiency of the transmission and guarantee greater transmitted power. The Polini HT clutch gives the possibility to adjust the clutch spring load and choose the optimal teeth of the primary gear to adapt the ratios.

With the wide choice of spare parts in the catalogue it is possible to modify the Polini HT For Race clutch by easily replacing the primary gear.

The gear engagement is precise and fluid for an effortless gear change.