- On sale!
- New
Reference: 143.801.043
Brand: POLINI
Polini 910 minimoto fairing glass 143.801.043
Polini 910 minimoto fairing glass. The universal Polini 910 minimoto fairing. Polini Code: 143.801.043
Xmotorstore Payments
Polini 910 s minimoto fairing right plus left, compatible with all polini 910.
Polini Code: 143.801.047
Reference: 143.801.043
Brand: POLINI
Polini 910 minimoto fairing glass. The universal Polini 910 minimoto fairing. Polini Code: 143.801.043
Reference: 143.762.013
Brand: POLINI
Seat for fairing 910 s / gp3 (with biadhesive) 143.762.013
Reference: 143.803.015
Brand: POLINI
Polini 910 S RS minimoto tail. The tail for 910 is compatible with all models of Polini 910 S and RS. The blue tail for 910 is molded in blue plastic material. Polini Code: 143.803.015
Reference: 143.802.017
Brand: POLINI
Minibike tank fairing Polini 910 rs 910 / 910 / 910 s, rs. Code 143.802.017
Reference: 143.800.067
Brand: POLINI
Polini 910 S blue minimoto front fender. Polini Code: 143.800.067
Reference: 001002R006A0
Brand: DM
Pair of flywheel side footpeg support spacers. The pedal spacers are used to maintain the correct distance between the pedal support Dm and the starter cover.
Reference: TCM334
Brand: Tecnominimoto
Cylinder head 50 cc air-cooled with flat piston, compatible with Bzm, Or, Tcm.
Reference: 1001 R
Brand: STAMAS
Central frame Stamas SR race factory 2020, the 100% made in Italy competition frame. Suitable for Stamas Midi and Mini minibikes. Total weight: 2,908 kg
Reference: MAS.HM3
Brand: CS Racing
Pair of weights for EPIC HAMMER 2.0 two-mass clutches New HAMMER 2.0 clutches born from the experience of our technicians directly from the most important competition fields, it has immediately become an irreplaceable tool !!! Precisely this experience of ours in the world of race minibikes and beyond ... always leads us towards a continuous evolution and...
Reference: 001001002000
Brand: DM
New DM minimoto frame kit midi 2023 full chrome 4 version. Compatible with Dm Junior and Senior minimoto bikes. Reduced weight of 700 grams from the previous version. Tubular top 20mm bottom 18mm. DM Code: 001001002000
Reference: F00 005
Brand: DM
Rear hub dm for hydraulic brake Formula Lightened rear hub 114 mm DM weight 190g THE HUB DOES NOT INCLUDE THE BEARINGS
Reference: 112.240.14
Brand: GRC
Lower motor pin Grc d.14 midi rrz-3
Reference: 143.160.009
Brand: POLINI
Polini mini-bike clutch 2 masses. Signature for Polini 6.2 and 4.2 hp engine. The clutch was designed with the aim of obtaining a safe, functional product and above all with the possibility of allowing the most varied adjustments thus allowing it to be adapted to the most diverse use requirements. Polini Code: 143.160.009
Reference: 5007P
Brand: STAMAS
Stamas factory rear hub for pulley including spacer and bearings.
Reference: 095
Brand: DM
Minimoto rear fender Dm in resin for steel swingarm. Shaped for steel swingarm, not compatible with aluminum swingarm. Dm code: 095
Reference: 043 DM
Brand: DM
New kit fork plates DM 28 diameter with OFF SET variation from 0 mm to + 2 mm or - 2mm. Tested and promoted with excellent results by the drivers of the Dm Official Team.
Reference: 001002R017F0
Brand: DM
Aluminum rear mechanical brake caliper support kit for minimoto Dm. Code: 001002R017F0
Reference: PISTONE IAME 40CC
Brand: CS Racing
Piston Cs 40cc minimoto. It is advisable to maintain a tolerance of about 5 hundredths of a millimeter between the cylinder and the piston. The abbreviations R and V indicate the tolerances R = tolerance 0 + 0.01 mm V = tolerance 0 - 0.01 mm
Reference: 143.395.015
Brand: POLINI
Polini minibike front brake wire, for mechanical brakes. Polini code: 143.395.015