- On sale!
- Reduced price
- New
Reference: FM40028-20
Brand: Formula
brake lever kit Formula
Formula minimoto minicross brake lever. Universal right or left. Lever weight 40g, Formula code: FM40028-20
Xmotorstore Payments
Formula tube fixing o-ring kit
Code: FD40071-10
Reference: FM40028-20
Brand: Formula
Formula minimoto minicross brake lever. Universal right or left. Lever weight 40g, Formula code: FM40028-20
Reference: FM40022-10
Brand: Formula
Formula caliper pistons kit Universal for front or rear Code: FM40022-10 Diameter: 22mm Why choose an original Formula product? Beware of imitations, choose top-of-the-range safety and performance. On xmotorstore all Formula spare parts are original.
Reference: FM10046-40
Brand: Formula
Formula front brake hose for minimoto. The original formula brake hose. The Formula brake hose for Dm, Stamas, Grc, and others. Ring attachment: 6 mm Tube diameter: 5 mm Formula Code: FM10046-40
Reference: FM40026-20
Brand: Formula
Formula 11mm diameter front pump piston kit. Formula Code: FM40026-20
Reference: GHR 001.003
Brand: GHR
Minibike engine Ghr gp1 h2o 50 factory racing without carburetor, filter and muffler. The Ghr engine block is applicable on any Italian minimoto, such as: Dm, Grc, Stamas. We recommend combining the original Ghr muffler. TYPE: Single cylinder two stroke SUPPLY: Lamellar input CARBURETTOR: Dell'orto PHBG D. 21 (not included) BORE: 40 nominal RACE: 39.6...
Reference: Pistone IAME 50cc
Brand: CS Racing
Iame Cs piston for 50cc minimoto engines. It is advisable to maintain a tolerance of about 5 hundredths of a millimeter between the cylinder and the piston. The abbreviations R and V indicate the tolerances R = tolerance 0 + 0.01 mm V = tolerance 0 - 0.01 mm
Reference: 143.065.002
Brand: POLINI
Steering damper oil seals set Gp2. Series of oil seals for minimoto.
Reference: 3113555
Brand: Malossi
Malossi thermal unit 50 cc h2o for mini bikes. Malossi code: 3113555. Malossi cylinder kit diameter 40 mm, 50cc for Polini 2t mini bike engine. Malossi cylinder kit for pocket bikes, features: ALUMINUM CYLINDER: Cylinders obtained by gravity casting in specific steel shells. Material: primary aluminum alloy with high silicon content, tempered and...
Reference: GHR 059.001
Brand: GHR
Ghr team expansion for 50cc engine. With springs and anti-vibration
Reference: 001002R026B0
Brand: DM
Minimoto Dm standard wheel bearings, 10 pieces. DM Code: 001002R026B0
Reference: TST.001
Brand: CS Racing
Engine head support bracket Cs Bzm. Universal support for mini bike head.
Reference: 1023
Brand: STAMAS
Water tank support bracket for sr race factory Stamas frame
Reference: GHR 024.001
Brand: GHR
Coupling shaft 14/5 X 32.3 for Ghr connecting rod compatible with Bzm, Iame, Cs, Ghr shafts.
Reference: 143.395.015
Brand: POLINI
Polini minibike front brake wire, for mechanical brakes. Polini code: 143.395.015
Reference: SCR.0270 + SCR.0287
Brand: CS Racing
CS muffler for flanged motors to be chosen from: Muffler cs flange 10 Muffler cs flange 12 Muffler cs flange 15 (ATTENTION: CYLINDER BUSH EXCLUDED)
Reference: 2036 8 18NC
Brand: PBR
Minimoto sprocket M10 Z8. Reinforced mini-bike sprocket with 8-tooth M10 thread. Compatible with bell: CS, Iame, Bzm, Ghr, Xracing.
Reference: Xracing-chiave-frizione
Brand: XRACING
Minibike clutch adjustment wrench. Key to adjust the minibike clutch nuts, compatible with clutches: Polini, Ghr, Bzm, Cs, Iame, and others.
Reference: zoc100.0504
Brand: Zocchi
Minimoto clutch shim kit. Kit of washers for calibrating the minibike clutch weights. These "shims" are used to create the correct clearance between the bell and the minibike clutch. As a general rule, the total difference in diameter between the bell and the clutch must be 1 cm. (always check based on brand and model).