Xmotorstore Payments
Polini Cp carburettor d.24 evolution air starter manual knob.
24 Polini carburetor settings:
Maximum jet 112
Minimum Jet 40
Needle 14/22
25x30 valve
Pulverizer bush d.2,7
Air wire connection Ø 60 mm
Carburetor sleeve Ø 28.5 mm
Polini Code: 201.2400
Polini Cp carburettor d.24 air starter manual knob.
24 Polini carburetor settings:
Maximum jet 112
Minimum Jet 40
Needle 14/22
25x30 valve
Pulverizer bush d.2,7
Air wire connection Ø 60 mm
Carburetor sleeve Ø 28.5 mm
Polini Code: 201.2400
Reference: getto massimo Polini cp
Brand: POLINI
Polini main jet for Cp Keihin Pwk carburetor (available from 40 to 119)
Reference: 343.0332
Brand: POLINI
Idle jet carburetor Cp Polini. Available in all sizes: Idle jet 32 Polini carburetor Idle jet 34 Polini carburettor Idle jet 36 Polini carburettor Idle jet 38 Polini carburettor Idle jet 40 Polini carburettor Idle jet 42 Polini carburetor Idle jet 44 Polini carburettor Idle jet 46 Polini carburettor Idle jet 49 Polini carburettor Idle jet 52 Polini...
Reference: 215.0439
Brand: POLINI
Intake manifold Minarelli AM6 Derbi for carburetors 23-24 rotatable 360 degrees. Manifold compatible with: APRILIA: AF1 50 MINARELLI AM6 - MX 50 Minarelli AM6 - RS 50 from 2006 -> (DERBI D50B) - RS 50 MINARELLI AM6 - RS4 50 (DERBI D50B) - RX 50 MINARELLI AM6 - RX-SX 50 from 2006-> (DERBI D50B) - TUONO 50 Minarelli AM6 BETA: RR 50 AM6 (1999-2002) -...
Reference: 215.0445
Brand: POLINI
Polini 360 ° intake manifold sleeve diameter 28.5mm. Polini Code: 215.0445
Reference: 215.0204
Brand: POLINI
Intake manifold for Vespa Pk Xl 50cc 16mm 2 holes, for 17.5 carburetor assembly. Polini Code: 215.0204 Can be combined with Polini CP carburetors Ø 17.5 code 2011.1704
Reference: getto massimo Polini cp
Brand: POLINI
Polini main jet for Cp Keihin Pwk carburetor (available from 40 to 119)
Reference: 316.0106
Brand: POLINI
Manual carburetor feed pump 6.5 cm body 316.0106
Reference: 1314516b
Brand: Malossi
Malossi sleeve diameter 22 in FKM (for PIAGGIO engines) Malossi code: 1314516b
Reference: 5520046
Brand: Malossi
Malossi Force Master 2.1 control unit for 250cc ie 4-stroke engines 5520046 Malossi Part Number: 5520046 In addition to the clear improvement of the mapping, the effort of the Malossi technicians has resulted in raising the rev limiter by 1,000 RPM depending on the vehicle, making the Force Master even more performing! The Force Master control unit allows...
Reference: 215.0444
Brand: POLINI
Polini 360 ° intake manifold sleeve diameter 33mm. Polini Code: 215.0444
Reference: 343.0013
Brand: POLINI
Or Polini float chamber cap. Polini Code: 343.0013
Reference: 02 4708B
Brand: Malossi
Malossi inclined 20x30 mm intake manifold 02 4708B Code: 02 4708B Malossi inclined intake manifold
Reference: 5519814
Brand: Malossi
Malossi Force master 2.1 electronic control unit 5519814 for Honda Malossi code: 5519814 The Force Master 2.1 ECU is much easier to configure. Making products more ergonomic and simple to use has always been a Malossi objective: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication...
Reference: 215.0370
Brand: POLINI
Intake manifold Peugeot 15mm Carter Polini. Polini Code: 215.0370 Compatible with: PEUGEOT: 103 - 104 - 105 - GL 10 - 103 SPX 50
Reference: 215.0452
Brand: POLINI
Polini 360 ° intake manifold sleeve diameter 35mm. Polini Code: 215.0452
Reference: 02 0457B
Brand: Malossi
Malossi collector for Gilera Cb1 19X24 mm inclined with center distance 45 - 50 for PHBG 19.5 carburetors. Malossi code: 02 0457B
Reference: 201.2300
Brand: POLINI
Polini Cp diameter 23 carburettor with manual knob air starter. 23 Polini carburetor settings: Maximum jet 110 Minimum Jet 40 Needle 14/22 24x30 valve Pulverizer bush d.2,7 Polini Code: 201.2300
Reference: 343.0029
Brand: POLINI
Transparent Polini carburetor bowl. Polini Code: 343.0029
Reference: 223.0120
Brand: POLINI
Intake sleeve Vespa Px Pe 125cc 200cc 2t diameter 34mm length 33mm. Polini code: 223.0120
Polini Cp carburettor d.24 evolution air starter manual knob.
24 Polini carburetor settings:
Maximum jet 112
Minimum Jet 40
Needle 14/22
25x30 valve
Pulverizer bush d.2,7
Air wire connection Ø 60 mm
Carburetor sleeve Ø 28.5 mm
Polini Code: 201.2400
