- Reduced price
- New
 
	        
    Xmotorstore Payments
 
				
				
					 
	         
          Malossi Force master 2.1 electronic control unit 5519529 for Yamaha
Malossi code: 5519529
The Force Master 2.1 ECU is much easier to configure. Making products more ergonomic and simple to use has always been a Malossi objective: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication lines, a new user interface and the addition of an input for capacitive ignition, Force Master 2.1 is the ideal complement for managing vehicle performance: without functional limitations, it allows you to push the engine beyond the barrier of the original rev limiter.
Technical data
-Carburetion adjustment
± 14% at min/average/max
-Rev limiter: +1,800 RPM
-Temperature range = -30°C +80°C
-Minimum operating voltage = +7V
-Maximum operating voltage = +16V
-Average current absorbed <-200mA
-Environmental protection = IP65
4 different mappings:
-curve 0: original exhaust, Malossi cylinder kit, original cams, original filter
-curve 1: Malossi exhaust with DB killer, Malossi thermal unit, original cams, Malossi filter
-curve 2: Malossi exhaust with DB killer, Malossi thermal unit, Malossi cams, original filter
-curve 3: Malossi exhaust with DB killer, Malossi thermal unit, Malossi cams, original filter
Malossi control unit for:
Malossi control unit for Yamaha MT-125 ie 4T LC euro 3 <-2018 (E3J4E) attention: mount exclusively with the Malossi cylinder art. 3114852.
Malossi control unit for Yamaha MT-125 ie 4T LC euro 4 2019->2020 (E3W1E) attention: mount exclusively with the Malossi cylinder art. 3114852.
Malossi control unit for Yamaha WR R-X 125 ie 4T LC euro 3 (E3D9E) attention: mount exclusively with the Malossi cylinder art. 3114852.
Malossi control unit for Yamaha YZF-R 125 ie 4T LC euro 3 <-2013 attention: mount exclusively with the Malossi cylinder art. 3114852.
Malossi control unit for Yamaha YZF-R 125 ie 4T LC euro 3 2014->2018 attention: mount exclusively with the Malossi cylinder art. 3114852.
Reference: 2917505
Brand: Malossi
Malossi RACING spring set for original clutch for BMW Malossi code: 2917505 RACING SPRING for ORIGINAL clutch Pre-hardened carbon steel springs with high yield strength, protected by a high heat resistance paint in various colors. The different colors highlight the load of each set of springs.
Reference: 1013
Brand: STAMAS
Pair of Stamas seatpost frame pads
Reference: 171.0556
Brand: POLINI
Polini ignition for Piaggio Hello. Polini code: 171.0556 Polini ignition for Piaggio mopeds. Compatible with Piaggio: BOXER - BRAVO - CBA - CIAO - ECO - GRILLO - SI. For a product in which it is increasingly difficult to find original spare parts, Polini is also attentive to the details that can make the difference. For this reason it features the 12 volt...
Reference: 102-DM
Brand: DM
DM Junior minimoto trim variators. 3-adjustment trim variators, for Dm minimoto, compatible with mini and midi, for Junior. Material: aluminum. Color: Red (anodized). Use: Racing.
Reference: MF18.00220
Motorforce Racing airbox MF18.00220 with 32 mm and 48 mm inlets. Semi-open filter box with porous sponge. High airflow and aggressive intake sound.
Reference: 215.0370
Brand: POLINI
Intake manifold Peugeot 15mm Carter Polini. Polini Code: 215.0370 Compatible with: PEUGEOT: 103 - 104 - 105 - GL 10 - 103 SPX 50
Reference: 01.SB.0322.L
Brand: Ohvale
Ohvale Washer 14.5×1.5×20 Code: 01.SB.0322.L
Reference: 01.RP.0098.L
Brand: Pirelli
Pirelli Diablo SBK rear tire for Ohvale Gp-0 and Gp-0 Evo, sizes: 120/80-10. Pirelli front tire for Ohvale GP-0 and GP-0 Evo. Ohvale Code: 01.RP.0098.L If you are looking for the 10 inch rear tire for Ohvale Gp-0, this is the official choice of Ohvale original equipment, reliable and safe, the Pirelli for Ohvale guarantee excellent grip and durability.
Reference: 67 9925
Brand: Malossi
Malossi HTQ secondary gears z 14 / 43 with forced fit diameter 17 mm 67 9925 Malossi code: 67 9925. Transmission gears in special steel with straight teeth and recalculated ratio. They completely eliminate any axial thrust, reducing stress on the bearings. Made with very high precision machines, casehardened, tempered and ground in order to provide high...
Reference: 504001
Brand: T4TUNE
Adjustable hydraulic shock absorber Booster 245mm
Reference: 112.486.40
Brand: GRC
Muffler springs dismount tool, the spring puller is used to disassemble and assemble the springs from the muffler. Rubberized handle for better grip, curved tip compatible with all springs.
Reference: 241.724
Brand: POLINI
Polini Variator for Hi-speed Yamaha 125/150 Xenter-Majesty S 125 241.724 Code: 241.724 Variator supplied with two series of 19x17 10.7 g rollers. and 11.5 gr. Application: Variator Yamaha, Variator Yamaha Xenter 125/150 4T LC from 2011, Variator Yamaha Majesty 125 S Injection '14, Variator Yamaha Smax 125 ie 4T LC / 160 ie 4T LC
Reference: 204.0903/A
Brand: POLINI
Honda Crf 450 piston diameter 100 mm selection A (99.935 mm). Polini Code: 204.0903 / A Honda piston for: Honda, Honda Crf 450, Polini.
Reference: 01.SB.1303.L
Brand: Ohvale
Ohvale O-RING 33×2Code: 01.SB.1303.L
 
		            Malossi Force master 2.1 electronic control unit 5519529 for Yamaha
Malossi code: 5519529
The Force Master 2.1 ECU is much easier to configure. Making products more ergonomic and simple to use has always been a Malossi objective: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication lines, a new user interface and the addition of an input for capacitive ignition, Force Master 2.1 is the ideal complement for managing vehicle performance: without functional limitations, it allows you to push the engine beyond the barrier of the original rev limiter.
Technical data
-Carburetion adjustment
± 14% at min/average/max
-Rev limiter: +1,800 RPM
-Temperature range = -30°C +80°C
-Minimum operating voltage = +7V
-Maximum operating voltage = +16V
-Average current absorbed <-200mA
-Environmental protection = IP65
4 different mappings:
-curve 0: original exhaust, Malossi cylinder kit, original cams, original filter
-curve 1: Malossi exhaust with DB killer, Malossi thermal unit, original cams, Malossi filter
-curve 2: Malossi exhaust with DB killer, Malossi thermal unit, Malossi cams, original filter
-curve 3: Malossi exhaust with DB killer, Malossi thermal unit, Malossi cams, original filter