Xmotorstore Payments
Lambda TC unit O2 controller Malossi emulator
Code: 5514749
To further optimize carburetion and performance in transients, the use of the O2 controller is recommended.
In the latest generation motorcycles, the control unit, thanks to the lambda probe, is able to correct the amount of fuel that must be injected so that the carburetion is constant, even in the Closed Loop area.
The O2 controller allows you to totally control the carburetion, to obtain an optimal air / fuel ratio.
The Malossi Lambda emulator is a device capable of simulating the lambda sensor signals that the vehicle's original ECU expects to receive. In this way the original lambda probe is used to obtain the optimal carburetion, without the original control unit detecting faults or errors.
Lambda TC unit O2 controller Malossi emulator
Code: 5514749
To further optimize carburetion and performance in transients, the use of the O2 controller is recommended.
In the latest generation motorcycles, the control unit, thanks to the lambda probe, is able to correct the amount of fuel that must be injected so that the carburetion is constant, even in the Closed Loop area.
The O2 controller allows you to totally control the carburetion, to obtain an optimal air / fuel ratio.
The Malossi Lambda emulator is a device capable of simulating the lambda sensor signals that the vehicle's original ECU expects to receive. In this way the original lambda probe is used to obtain the optimal carburetion, without the original control unit detecting faults or errors.
Reference: 5519817B
Brand: Malossi
Lambda O2 Emulator Malossi controller 5519817B Malossi code: 5519817B
Reference: 105924
Brand: Motul
Motul fork oil factory line light 5W 105924. Hydraulic fluid for racing forks. Specifically designed for KAYABA, SHOWA, OHLINS, WP forks and for any other type of inverted or conventional fork. It reduces internal friction, especially between the forks and seals, thanks to the exclusive anti-friction additive designed and developed by the Motul brand....
Reference: 285.0502
Brand: POLINI
Polini valve oil seal set for 4-valve head Polini oil seal series for: Polini, Polini XP4T 110
Reference: 03.SC.0020.L
Brand: Ohvale
Ohvale Silencer mounting Bracket 160 EVO Code: 03.SC.0020.L
Reference: PbrATR1
Brand: PBR
Motorcycle chain detacher, cuts and rivets chain. The Atr1 motorcycle chain tool is the perfect tool for folding and opening the chain of your motorcycle. Made to last over time Atr1 is the professional tool for motorcycle chains made in Pbr. This tool can be used to bring out the chain pins, and when closing the chain to rivet the new joints.
Reference: GHR 022.001
Brand: GHR
GHR Engine Mount. Completely in stainless steel. Compatible with Bzm engine block, suitable for water pipe passage.
Reference: 31 8520
Brand: Malossi
Malossi cylinder kit diameter 40 in cast iron with pin diameter 12 Malossi code: 31 8520 Malossi cylinder kit for APRILIA MOJITO CUSTOM 50 2T. Malossi cylinder kit for APRILIA SCARABEO CLASSIC 50 2T euro 4 2018-(CA91M). Malossi cylinder kit for APRILIA SCARABEO STREET 50 2T (PIAGGIO). Malossi cylinder kit for APRILIA SCARABEO STREET 50 2T euro 4 2018-...
Reference: 6111121
Brand: Malossi
Malossi rear pulley assembly Malossi code: 6111121 Malossi rear pulley assembly for APRILIA SONIC 50 2T only for OVER RANGE. Malossi rear pulley assembly for APRILIA SONIC 50 2T LC only for OVER RANGE. Malossi rear pulley assembly for MALAGUTI F10 50 2T only for OVER RANGE. Malossi rear pulley assembly for MALAGUTI YESTERDAY 50 2T only for OVER RANGE....
Reference: 5512341
Brand: Malossi
Malossi digitronic digital electronic control unit for vehicles with immobilizer 5512341. DIGITRONIC for 4-stroke engines. Digital electronic control unit with mapping memory system on microprocessor. Raising the rev limiter by 500. Ignition advance mapping controlled by 16 break-points, to perfectly adapt to Malossi and original 4 stroke cylinders....
Reference: 143.075.011
Brand: POLINI
Original Polini sprocket guard for Reverso minimoto engine. Code 143.075.011. Essential protection for rider and transmission.
Reference: 01.AM.0010.L
Brand: Ohvale
Ohvale washer M14 flat M14 D.15X28X2,5. Ohvale code: 01.AM.0010.L
Reference: 200.2054
Brand: POLINI
Polini muffler for Vespa 125 cc 2t PK 200.2054. For models with battery, the use of the bracket code 214.0138 is recommended, which allows you to keep the support in a higher position. Polini's commitment to the timeless Vespa continues with the launch of the brand new Original muffler. Created with the aim of improving performance and at the same time...
Reference: 5516953
Brand: Malossi
Malossi Vespower ignition with 20 mm diameter cone Malossi Code: 5516953 Malossi Vespower ignition with 20 mm diameter cone and 1.2 kg flywheel Complete ignition line for the entire vintage Vespa range with gears. To allow a perfect and easy installation, a specific version has been studied for each model. The ignition is distinguished by: - Lightened...
Reference: 206.0190
Brand: POLINI
Polini segment for Vespa 125 diameter 61x1.5 mm 206.0190 Polini segment for: Vespa, Vespa 125, Polini
Reference: 215.0116
Brand: POLINI
VESPA : VESPA 50 SPECIAL - VESPA 125 PRIMAVERA 2T - VESPA 125 PRIMAVERA ET3 2T To be paired with � 19 Polini Cp Carburetor cod.201.1905 or � 21 cod.201.2103
Reference: 01.IF.0066.L
Brand: Ohvale
Ohvale rear brake pump complete (Formula). Code: 01.IF.0066.L PUMP HOLES DISTANCE: 40 mm PUMP CONNECTION HOLE DIAMETER: 5 mm.
Reference: 230.0533
Brand: POLINI
Polini clutch for race Vespa px 125 150 200e with z23 helical teeth pinion. Polini code: 230.0533 Compatible with: VESPA: 125 2T PX - 125 2T T5 - 125 2T TS - 125/150 2T COSA - 150 2T PX - 150 2T SPRINT VELOCE - 200 2T COSA - 200 2T PE, PX. The Polini HT For Race clutch represents the pinnacle of technology for the Vespa PX or PE.
Lambda TC unit O2 controller Malossi emulator
Code: 5514749
To further optimize carburetion and performance in transients, the use of the O2 controller is recommended.
In the latest generation motorcycles, the control unit, thanks to the lambda probe, is able to correct the amount of fuel that must be injected so that the carburetion is constant, even in the Closed Loop area.
The O2 controller allows you to totally control the carburetion, to obtain an optimal air / fuel ratio.
The Malossi Lambda emulator is a device capable of simulating the lambda sensor signals that the vehicle's original ECU expects to receive. In this way the original lambda probe is used to obtain the optimal carburetion, without the original control unit detecting faults or errors.
