Or held for rims 6.5" (3,53X145,65) 143.355.003

Reference: 091001

Brand: GHR

Minimoto exhaust flange Ghr Bzm Cs

Connection between cylinder and exhaust for minimoto, compatible with: GHR, BZM, CS, IAME. The flange also includes the three high temperature O-rings, the O-rings allow to avoid the escape of the exhaust gases from the junction between the manifold and the curve and between the cylinder and the flange. Professional collector, in first choice metal....

Reference: 143.425.033

Brand: POLINI

Polini 6.2 hp minimoto exhaust 143.425.033

Muffler for Polini minimoto with 6.2 hp engine. Polini Code: 143.425.033

Reference: 143.804.036

Brand: POLINI

Polini 910 minimoto chain cover 143.804.036

Polini 910 minimoto chain cover, protects pinion, crown and chain. Polini Code: 143.804.036

Reference: MLL.0040

Brand: CS Racing

Green clutch springs 2.2mm

Green clutch springs with 2.2mm thread. Green springs are recommended on junior engines.

Reference: 143.405.003

Brand: POLINI

Lamellar valve for engine 6,2 hp with inserts

Reed valve for 6.2 hp engine with inserts. The Polini minibike reed valve is compatible with Polini 6.2 crankcases. Polini Code: 143.405.003

Reference: BZM-022025

Brand: BZM

Dome head Bzm d.40 50cc

Reference: 215.0224

Brand: POLINI

Polini 4.2 hp engine intake manifold

Polini 4.2 hp engine intake manifold, external diameter 19 mm (carburetor connection), internal diameter 15 mm. The manifold is compatible with 4.2 hp and Peugeot 103 minimoto engine. Polini Code: 215.0224

Reference: 143.010.001

Brand: POLINI

Polini cylinder with piston water 1^ seriers d.36 143.010.001

Polini cylinder with water piston first series d.36 for minimoto. 143.010.001

Reference: 001002SP1260

Brand: DM

factory rubber Padded saddle DM

Unique design racing seat pad, specially designed for DM minimoto. Dm code: 001002SP1260

Reference: 001002R017B0

Brand: DM

Columns mechanical front brake caliper bracket Dm

Minimoto DM front mechanical brake caliper support columns Long column: 33 mm Short column: 21 mm Smooth side stud diameter: 7 mm Stud thread diameter: 10 mm Code: R017BO

Reference: 112.252.05

Brand: GRC

Kit side spacers support hull Grc

Kit side spacers support hull Grc 

Reference: GHR 016.001

Brand: GHR

Couple carter engine factory Ghr

GHR factory crankcase. For GHR 50cc and 40cc engine. (compatible with bzm). The first to be designed with an engine casing that allows the clutch unit to be cooled in the best possible way, the main cause of the detachment or breakage of the masses. Particular attention has also been given to the cooling of the ignition unit, because the neodymium magnets...

Reference: 088

Brand: DM

Minimbike plastic tank cap

Plastic minibike tank cap, compatible with: Dm, Stamas, Blata. The minibike cap is knurled, to allow an optimal grip when opening and closing.

Reference: DD.VF.MIN

Brand: XRACING

Nut clutch/flywheel

Clutch nut / minimoto flywheel, compatible with engine: Polini, Cs, Ghr, Bzm.

Reference: GHR 502.001

Brand: GHR

Ghr cylinder d.36 40cc air

Ghr cylinder diameter 36 mm 40cc air. Air-cooled cylinder for minimoto. Cylinder weight 642 grams.

Reference: tcm201836

Brand: Tecnominimoto

Red TCM rear hub for DM (114 mm)

TCM rear red hub for DM (114 mm). For hydraulic brakes. Compatible with all original Dm rims, with flare to apply the Or water pump transmission pulley.