Xmotorstore Payments
Black clutch springs wire 2, 7mm. The black springs are recommended on open engines, they allow a greater starting point.
Black clutch springs wire 2, 7mm. The black springs are recommended on open engines, they allow a greater starting point.
Reference: KT0.0030
Brand: CS Racing
2 masses minimoto clutch spare parts kit. The kit is compatible with Cs, Iame, Ghr, Polini clutch.
Reference: MLL.0041
Brand: CS Racing
Blue clutch springs for minimoto, wire 2, 3mm (JUNIOR). The blue springs replace the previous purple version, they are recommended on junior engines.
Reference: MLL.0042
Brand: CS Racing
Red clutch springs for minimoto, wire 2, 5mm. Red springs are recommended on open engines.
Reference: MLL.0040
Brand: CS Racing
Green clutch springs with 2.2mm thread. Green springs are recommended on junior engines.
Reference: GHR035.003
Brand: GHR
Mini-bike clutch shoes GHR 2 masses 2G G-Carbotech. Massette for minimoto clutch, compatible with: Ghr, Cs, Tcm, Bzm, Polini. The GHR masses are suitable for racing use, perfect for short and long slopes, compatible with engines: Bzm, Iame, Cs, Tcm, Ghr. We recommend using an 81mm bell for running-in, and an 80mm bell for use.
Reference: 112.010.69
Brand: GRC
Minimoto water pump overhaul kit diameter 35 mm. The kit is universal, compatible with all minimoto water pumps.
Reference: 001002A00800
Brand: DM
Spacer plus screw on clutch side Dm. The spacer is used to maintain the distance between the pedal and the pinion in the event of a fall, thus preventing the pinion from breaking.
Reference: XR.CMP.001
Brand: XRACING
New XRACING minimoto bell with quick fixing bushing. Entirely made in Italy, machined from solid cast iron. Available in diameters: 78mm 79mm 80mm. This bell is compatible with M10 pinion. The new unique design ensures better cooling of the clutch assembly. The low weight ensures less traction effort, weight: 196 g
Reference: GHR 014.002
Brand: GHR
Gasket kit oring cylinder Ghr 50cc
Reference: 143.270.013
Brand: POLINI
21 mm diameter rubber intake manifold for minimoto. The steel manifold is suitable for all minimoto with Italian engine, such as iame, cs, ghr, Polini, bzm, zocchi and others. Manifold compatible with PHBG 15 18 19 21 carburetor. Collector measures: Holes for fixing: 5.5 mm Distance between holes: 34x43 mm Carburetor inlet hole: 21-23 mm Code: 143.270.013
Reference: Molle.rac.cs
Brand: CS Racing
Cs muffler exhaust fitting springs. Short cs minibike muffler springs, these springs are applied between the "cylinder" connection and the exhaust manifold. Attention: pair of springs, specific for Cs minibike muffler.
Reference: curva.cs.racing
Brand: CS Racing
Exhaust manifold Cs for flange 10 and 12 mm flange muffler, sector version for racing.
Reference: IMA-20100-0.05
Brand: CS Racing
Iame Cs cylinder gasket (5 pieces)
Reference: 5006/28
Brand: STAMAS
Factory front hub for 28 mm fork legs, including bearings and internal spacer.
Reference: 143.530.001
Brand: POLINI
Flywheel fins for minimoto, the flywheel levers are used to engage the starter during ignition. These flywheel levers are compatible with Polini, Iame, Bzm, Cs, Ghr. Polini Code: 143.530.001
Reference: IMZ-50995
Brand: CS Racing
Cs H2o engine gasket kit, for 40 and 50 cc engines.
Reference: 091
Brand: DM
Hull quick release screw replacement. Dm Code: 091
Reference: GHR 501.003
Brand: GHR
40cc air Ghr engine (without carburettor, filter and muffler). 40cc air Ghr engine, the engine does not include the carburetor and exhaust. Ghr motor available with 10/12/14/15 flange or with flange. At the time of purchase, insert the desired flange in the notes. GHR minimoto engine weight: 5180 grams
Reference: 143.800.050
Brand: POLINI
Polini 911 rear fender. Specific mudguard for Polini 911 minibike. Polini code: 143.800.050
Reference: 12.223.19
Brand: GRC
Swingarm attachment pin m10 rrz-3 2015 Grc
Reference: 112.486.40
Brand: GRC
Muffler springs dismount tool, the spring puller is used to disassemble and assemble the springs from the muffler. Rubberized handle for better grip, curved tip compatible with all springs.
Black clutch springs wire 2, 7mm. The black springs are recommended on open engines, they allow a greater starting point.
