Xmotorstore Payments
Minimoto clutch spring guide (2 and 3 masses). Compatible with: Polini, Cs, Iame, Ghr, Bzm. The minimoto clutch spring guide is used to keep the masses sliding stable, without creating unwanted twists or vibrations.
Minimoto clutch spring guide (2 and 3 masses). Compatible with: Polini, Cs, Iame, Ghr, Bzm. The minimoto clutch spring guide is used to keep the masses sliding stable, without creating unwanted twists or vibrations.
Reference: MLL.0041
Brand: CS Racing
Blue clutch springs for minimoto, wire 2, 3mm (JUNIOR). The blue springs replace the previous purple version, they are recommended on junior engines.
Reference: MLL.0042
Brand: CS Racing
Red clutch springs for minimoto, wire 2, 5mm. Red springs are recommended on open engines.
Reference: MLL.0043
Brand: CS Racing
Black clutch springs wire 2, 7mm. The black springs are recommended on open engines, they allow a greater starting point.
Reference: MLL.0040
Brand: CS Racing
Green clutch springs with 2.2mm thread. Green springs are recommended on junior engines.
Reference: 143.803.006
Brand: POLINI
Polini 911 minibike white rear tail. Polini code: 143.803.006
Reference: 143.010.015
Brand: POLINI
Polini cylinder with water piston d.36 3 reverse transfers. Polini code: 143.010.015
Reference: 143.705.008
Brand: POLINI
Pair of Polini minimoto clutch shoes. The Polini shoes are compatible with the original Polini clutch, but also on Italian clutches such as bzm, cs, and others. Use Polini clutch shoes in a range from 6500 to 9000 rpm, only after careful running-in. Polini Code: 143.705.008 Ean: 8054705021091 Plate pin connection diameter: 6 mm Tie rod fixing pin...
Reference: GHR 504.003
Brand: GHR
Ghr piston for 40cc air-cooled engines. From 2023 the GHR piston for air engines becomes one size (Tolerance 35.96/7).
Reference: 6006
Brand: STAMAS
Raw monocoque Stamas sr r factory. The Stamas rear fairing is made of fiberglass and does not include the internal tank.
Reference: 102
Brand: DM
Trim variation kit Dm 4 holes, in aluminum. Dm Code: 102
Reference: 1009
Brand: STAMAS
Standard Stamas chain tensioner couple
Reference: Pistone IAME 50cc
Brand: CS Racing
Iame Cs piston for 50cc minimoto engines. It is advisable to maintain a tolerance of about 5 hundredths of a millimeter between the cylinder and the piston. The abbreviations R and V indicate the tolerances R = tolerance 0 + 0.01 mm V = tolerance 0 - 0.01 mm
Reference: TCM60024
Brand: Tecnominimoto
Screw and bushing kit for Dm and Grc minimoto discs. Anti-unscrewing minimoto disc screw kit, it can also be used on hubs with stripped thread, thanks to the practical nut to be positioned on the inside of the disc. The disc screw kit is compatible with: Dm, Grc, Phantom.
Reference: GHR 503.001
Brand: GHR
Radial head Ghr 40cc air. Head for mini bike cylinder 40cc diameter 36mm Ghr air cooled.
Reference: 143.730.023
Brand: POLINI
Polini rear mini bike wheel black 5 spokes 6.5 inch steel gp3 channel 60 mm. Code: 143.730.023
Reference: 001002SP0880-tcm
Brand: Tecnominimoto
Pair of fork stems for Dm in stainless steel diameter 25 mm with cnc fork foot Code: 001002SP0880-tcm
Reference: 1011
Brand: STAMAS
Front fairing support tube sr Stamas
Reference: FM10191-40
Brand: Formula
Formula minibike front braided brake hose M8 - M6. Formula code: FM10191-40 Formula hydraulic front brake hose for minibikes, specific for versions from 2023 onwards, with M8 pump side connection and M6 caliper connection.
Reference: 2024
Brand: STAMAS
Stamas front end kit diameter 28 Composed of: stainless steel fork legs d. 28 dumbbell seeds d. 28 detachable semi-handlebar collars fork plates front hub
Reference: GM.3MS
Brand: CS Racing
Clutch spring guide 3 masses cs racing iame. Spring guide specific for Cs clutch.
Minimoto clutch spring guide (2 and 3 masses). Compatible with: Polini, Cs, Iame, Ghr, Bzm. The minimoto clutch spring guide is used to keep the masses sliding stable, without creating unwanted twists or vibrations.
