Polini minibike clutch

Reference: 143.801.001

Brand: POLINI

Polini minibike fairing glass 143.801.001

Polini minibike 911 fairing glass. Polini code: 143.801.001

Reference: 143.400.002

Brand: POLINI

Reed set in carbon thickness 0,28 0,33

Polini carbon reeds set 0.28 and 0.33 thick. Polini Code: 143.400.002

Reference: 001002R08800

Brand: DM

Breather fitting radiator pz.1

Breather fitting radiator pz.1

Reference: 143.025.002

Brand: POLINI

Segment diameter 36x1 mm for Polini 40cc 143.025.002

Segment diameter 36x1 mm for Polini minimoto 40cc air and h2o. Polini code: 143.025.002

Reference: reg.for.dm

Brand: DM

Pair of DM swingarm registers up to 2007

Pair of adjusters for minibike swingarm DM up to 2007. Mechanical adjusters for minibike swingarm in mini and midi version.

Reference: FM40064-20

Brand: Formula

Formula front pump lever fixing screw kit

Formula front pump lever fixing screw kit for minibikes and minicross. This pin is an original Formula replacement, and is compatible with original implants.

Reference: 1003

Brand: STAMAS

Front fairing support frame Stamas

Front fairing support frame Stamas

Reference: KOYO 60002

Wheel Bearings minimoto racing KOYO 10x26x8

KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.

Reference: 0H5-5320-00 (USB CABLE COMP.)

Brand: Arianetech

USB cable for Ariane K2RE minibike control unit calibration

USB cable for Ariane K2RE minibike control unit calibration. Cable for connection to the control unit of the Ariane K2RE electric minibike, the cable is necessary for setting the power of the minibike. With the cable and the appropriate program supplied separately, it will be possible to connect to the control unit and calibrate the minibike to your liking.

Reference: CTR.0050

Brand: CS Racing

Clutch case Cs with anodized bearing

Universal cs racing clutch cover for mini bikes. Compatible with : bzm, iame, cs, polini.

Reference: TCMKITFR86M8

Brand: Tecnominimoto

Minimoto Tcm clutch Kit 86 mm

Kit frizione 86 mm completo TCM per motori minimoto. Kit compatibile con: Iame, Bzm, Tcm, Cs e Sg. 1) Corpo massa: Massette per frizione di nostra produzione. Raggiatura del corpo massa aumentato del 20%. Boccola teflonata sul perno. Pasta d’attrito racing. Peso singolo grammi : 33.5 Utilizzate su tutti i tipi di motore e su moto ufficiali risulta fornire...

Reference: 017010

Brand: BZM

Bzm minimoto piston for 50cc 2t

Bzm minimoto piston for 50cc 2t. Original Bzm piston diameter 40mm with flat head for 50cc 2t engines. Available in sizes: Piston bzm selection 0. Piston bzm selection A. Bzm piston AA selection. Piston bzm selection B. Attention: The clearance between piston and cylinder must be approximately 0.040 (four hundredths).

Reference: 9004

Brand: STAMAS

Radiator racing minibike Stamas

Stamas racing oversized mini-bike radiator. The oversized radiator allows the correct temperature of the coolant to be maintained even in racing conditions.

Reference: ALB053

Brand: CS Racing

Pin light Iame 40cc / 50cc

Lightweight pin for Iame piston 40cc / 50cc 10x30x6 (40cc) 10x33x6 (50cc)

Reference: 112.010.75

Brand: GRC

Impeller pump water increased d.35 GRC

Minimoto oversized water pump impeller diameter 35 mm. Compatible with grc, cs, tecnomoto water pump.

Reference: IMZ-50992

Brand: CS Racing

Cs 40cc engine gaskets

Cs 40cc engine gaskets, available: Cs flange 10 gaskets, Cs flange 12 gaskets, Cs flange 15 gaskets.